v belts used for sale

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 50 rpm -Power: 1.4 kW -Construction: B5 -Diameter shaft: 48 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 620/250/H280 mm -Weight: 45 kg

Earth cable for inert gas device, electrode device -different: lengths -Dinse connector -Price per meter: 4 EUR/m -Number: several cables available -Price: per meter -Minimum purchase: complete

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

electric motor, three-phase motor -Power: 0.6 kW -Speed: 925 rpm -Shaft: Ø 18 mm -Design: B3 -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 360/170/H240 mm -Weight: 22 kg

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 545/295/H360 mm -Weight: 86 kg

tool adaptor: VDI 40 weight: . kg material: . Approx. 35 pieces The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: VDI 40 weight: . kg material: . Approx. 55 pieces The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump -Contents: approx. 1.5 l -Electric: 1.1 kW 1380 rpm -Protection class: IP 55 -Hydraulic valve -Pressure relief valve -pressure clock -Dimensions: 575/285/H230 mm -Weight: 23 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.12 kW -Construction: B3 angle -Diameter shaft: 9 mm -Protection class: IP 21 -Dimensions: 210/150/H135 mm -Weight: 2 kg

Absolute encoder, incremental encoder with solid shaft -Manufacturer: Lenord Bauer -Type: GEL 260-VN00500A000 -Dimensions: 90/90/H120 mm -Weight: 0.62 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Comes from a CNC machining center -Manufacturer: Visual Data -Type: MC31 GHEB1 HOM -Dimensions: 482/365/H265 mm -Weight: 12 kg

Statomat distributor, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: AER drive electronics -Type: V004 V003 V002 -Type: V004V003V002 -Number: 20x control cards available -Price: per piece -Dimensions: 80/135/H35 mm -Weight: 0.14 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: Monovolt PK 60 136-44585 -Number: 2x control cards available -Price: per piece -Dimensions: 40/170/H265 mm -Weight: 0.95 kg

Fan Ziehl-Abegg, type FN 050-VDH.4I.V7P1, 500mm diameter, 1340-940/ min. NEW

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: PK 50 monovolt -Number: 1x control cards available -Price: per piece -Dimensions: 40/210/H130 mm -Weight: 0.8 kg

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: B 54245020/v15 -Current: 150+100 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg

Quick-change attachment for wheel loader buckets, screening buckets, stone buckets, shovels, sorting buckets -Quantity: 5 pieces of various types -Number: 5 different manufacturers -Sale: only complete set -Price: complete -Total weight: 136 kg

Gebrauchte Besuchen sie unsere große Bäckereimaschinen Ausstellung!

Machine Details Stock-No. 1105-03866 Type of machine Machining Center - Vertical Make MAZAK Type VCS 530 C Year of manufacture 2016 Type of control CNC Storage location HAGUENAU FRANCE Country of origin JAPAN Delivery time immediately Freight basis EX WORKS Technical details x-travel 1050 mm Y-Travel 530 mm Z-Travel 510 mm control Mazatrol MATRIX Table dimensions 550 x 1300 mm distance spindle nose and table 180 - 690 mm distance spindle center to column: 610 mm table load 1200 kg Rapid Travel X/Y/Z 42 m/min feed range 1 - 8000 mm/min turning speed range: 40 - 12000 min-1 spindle taper CAT 40 tool magazine: 30 seats Tool diameter 80 mm Workpiece weight max. 8 kg tool length - max. 350 mm connected load 40 kVA voltage 400 / 50 V / Hz Additional information VERY NICE MACHINE WITH CONVOYER WITH CONTROL MAZAK MATRIX COOLING TROUGHT THE SPINDLE

Frequency inverter Yaskawa Varispeed 616G5 CIMR-G5C41P5

Maximum welding power 104 kVA Arm spacing 100 - 500 mm Projection 500 mm Air pressure 60bar

Year: 2011 Travel X-axis: 2032 mm Y-axis: 660 mm Z-axis: 610 mm Spindle speed: 12,000 rpm with internal cooling Power: 18 kW Tool holder: SK 40 40 tool slots Table load: 2,700 kg Machine weight: 18,000 kg Machine hours: 11,417 hrs. Spindle hours: approx. 5,000 hours (maximum) Spindle change in 2020 - Subject to technical errors and prior sale. -

Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 4 A -Connection: 230 volts -Weight: 8 kg

Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg

Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355

Data light barrier, reflective light barrier, light barrier -12-30 V DC -1215100012 -Weight: 2 kg

Candle filter was used for a vegetable oil trial;

Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 27 pieces adapter sleeves -different sizes: 3.5-16 mm -Only for sale as a package -Weight: 4 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 21 pieces of collets -Various sizes: 3-25 mm -Price/Sale: complete -Weight: 4.5 kg

Product number: 2733 Type: ValueSpray Serial number: 10095201 Year of construction: 2011 Belt width: 280 mm Nozzles: 4 pcs. Compressed air: 8 Bar, 400 Nl/min. Power: 3 x 400V, 50Hz, 1.3kW Dimensions: 750 x 1350 x 1800 mm Weight: 235 kg

Original Knecht Filter (Air Filter) -Number of pieces x type: -1x Knecht LX 275 -1x Knecht LX 507 -1x Knecht LX 611 -1x Knecht LX 739 -1x Knecht LX 747 -Price: for every 5 pieces -Total weight: 20 kg

brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece

Barrel stub, axle stub, axle -Max. Weight: 750 kg -Rezess: Ø 49 mm -Number: 14x available -Price: per piece -Weight: 6.5 kg/piece

WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY

Refrigeration system from Vektor with 2 fans Year of manufacture : 1996 at the moment unfortunately no further information about the product

Outer Ø: 310 mm Bore: 115 mm Chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt spacing 120 mm Bolt D 27 mm- M16 new square safety spanner

Vibratory sieve Power : 22 kW Voltage : 400V /230V 50Hz rpm : 920 Capacity : Unknown

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg

C - elbow, type Ziehm Vision R in very good technical and optical condition.

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs