v belts used for sale

Inductive sensor, electronics sensor -High temperature resistant: 230 °C -Cable length: 10 m -Manufacturer designation: Cable socket 10 m -Type: VK A0 69 41 -Number: 16x available -Price: per piece -Weight: 250 g

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: - mm profile spindle: - Stück main drive: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: 0,8 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Converter module -Type: VI-241-CU -Price: per piece -Quantity: 5 available -Weight: 0.2 kg/piece

Three-phase motor, electric motor -Manufacturer: Volta, electric motor from guillotine shears Stankoimport 3218 -Type: AOC2-52-6 - C1 -Power: 9 kW -Speed: 890 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Dimensions: 570/370 / H315 mm -Weight: 112 kg

Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, cutter head -Recording: SK40 5 pieces Sizes: see pictures Price: complete -Box dimensions: 270/270/H160 mm -Weight: 15.2 kg

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 400 mm max. pitch circle: 133,4 mm short taper holder: Gr. 6/ DIN55027 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Abrasives: 48 types, 189 pieces in total -Outer diameter: 40 to 300 mm -Type: 1 photo with type designation/dimensions can be sent per article -Price: complete -Dimensions: 1200/800/H200 mm -Weight total: 202 kg

Computer monitor, control unit, operating unit, keyboard, screen, control -Manufacturer: Heidenhain, Manual Plus Monitor from lathe Kern CD 480 -Type: 12.1 VGA Unit Rotating. ID No. 367 957-02 -Dimensions: 400/300/165 mm -Weight: 5.8 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: VEB-WT, saw blade 630 x 6 -HSS-1711 -Inside: Ø 80 mm -Hole circle: Ø 120 x 22 mm -Number of teeth: 88 t -Number: 2x saw blades available -Price: per piece -Weight: 9.9 kg/piece

For sale: Vega radar sensor PS61. XXBAEHKMXX Order number: 2653.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, Fiber optic cable -Type: I-VH11Y 2K200/230 10A17 8B20 HCS Rugged -Length: 83 m -Price: complete -Dimensions roll: Ø 500 x 410 mm -Weight: 10 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, fiber optic cable -Type: AT-VQHB2Y -Application area: outdoor use -Length: 72 m -Price: complete -Dimensions roll: Ø 500 x 370 mm -Weight: 14 kg

Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg

Tool holder, milling holder, milling tool, cutter head -Milling fixtures: 12 pieces of different designs, see photo parts list -Sizes: see pictures -Price: complete -Dimension box: 200/330/H180 mm -Weight: 14.4 kg

PLC control, supply unit, converter, power module, U/E module, digital power amplifier -Manufacturer: Hydraulik Ring, digital power amplifier -Type: VRD 350 -Voltage: 24 V -Dimensions: 220/80/H130 mm -Weight: 0.8 kg

turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mm turning length: 200 mm control: Siemens Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

various blow molds available from stock. More information on request

electric motor, three-phase motor -Power: 0.18 kW -Electric motor: 3000 rpm -Voltage: 220/380 V -Shaft: Ø 14 x 30 mm -Design: B5 -Dimensions: 250/144/H165 mm -Weight: 6.3 kg

Used molds, in good condition. Available ex stock

Cylindrical roller bearings -SKF: NU 418 -Outer diameter: 225 mm -Inside diameter: 90 mm -Width: 54 mm -Price: per piece -Number: 2 pieces -Weight: 11.9 kg/piece

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

Baler V20X | 20t press for cardboard, foil, paper, waste Baler, packaging press V20X | 006 With a pressing force of up to 25 tons, the V20X can efficiently compact cardboard, plastic, paper, textiles and food waste. Recommended for markets, department stores, hotels and all other users who have to deal with average amounts of waste and have to work at low ceiling heights. Bale size: 800 mm H (variable) × 1100 mm W × 750 mm D Bale weight: 200–300 kg Pressing time: 35 seconds Pressing force: up to 25 tons Dimensions: 1970 mm H × 1695 mm W × 865 mm D Filling opening: 1100 mm W × 625 mm H Integrated bale ejection mechanism Weight: 980 kg Power supply: Three-phase, 380/400 volt 3 kW motor Noise: 74 decibels DIN EN 16500 IP54 protection class E-Power Standards PLC light indicator "Bale full" and "Automatic pressing process"

Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, Fiber optic cable -Type: I-VH11Y 2K200/230 10A17 8B20 HCS Rugged -Length: 139 m -Price: complete -Dimensions roll: Ø 500 x 420 mm -Weight: 14 kg

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 0.25 kW -Voltage: 220 V -Volume flow rate: 25 m³/h -Pressure height: 1500 mm WS -Dimensions: Ø 330 / 425 mm -Weight: 13 kg

Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...

Bale size: 600 mm H (variable) × 600 mm W × 400 mm D Bale weight: 15–30 kg Pressing time: 35 seconds Pressing force: up to 8 tons Dimensions: 2500 mm H × 765 mm W × 575 mm D Integrated bale ejection mechanism Hinged door Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Weight: 415 kg Noise: 70 decibels DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification Made in EU OPTIONS Collecting tray for residual liquid Suitable for use at sea Electronic weighing system Annual maintenance contract Solar powered Galvanized or stainless steel V5HD PRESS FOR CANS & BOTTLES Fast, efficient and easy to use: The V5HD effortlessly presses aluminium cans and PET bottles to make them easier to dispose of. Recommended for restaurants, pubs, bars and special recyclers. Hinged door and 35-second pressing time Integrated bale ejection mechan ...

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 5000 kg -Chain length: 2250 mm -Dimensions: 900/500/H160 mm -Weight: 35 kg

Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.

Vibronics Ultrasonic Bath Brand: Vibronics Power 1.8 kw; Serial number: 6092 Total dimensions L: 2800 mm; W: 1700 mm; H: 930 mm; Tank size: WxHxD= 1350x720x990 mm Frequency 25 kHz equipped with 4x generators

Viesse pump RB316BGT with electric motor recon Ball bearings renewed from rotor The pump was overhauled with the following new parts: - Impeller - Mechanical seal - Gasket set - Valve flap

Tool holder, milling tool holder -Number: 2x SK50 recordings -various: versions -Price/Sale: only complete set -Weight: 12 kg

Suction conveyors with side channel compressor and time control various capacities available

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600

Converter, power supply, power supply unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece