v belts used for sale

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

<br><br><br>Still in operation: Yes<br>Available: immediately

Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on request.; ready for operation

working width 7.400 mm Still in operation: Yes Available: sofort

Working width: 1320 mm, unwinding outer diameter 1300 mm, unwinding inner diameter 70 - 155 mm, shaftless unwinding with lifting platform for mother reel, upwinding with pneumatic expansion shaft and mechanical lifting up device for finished reel, core inner diameter 76 mm, machine in producion

Machine completely reconditioned and repainted; Slitter rewinder with pneumatic unwinding and rewinding shaft, electrical lateral adjustment, working width 1320 mm, unwinding diameter 1300 mm, core diameter 76 mm, pneumatic brake Ortlinghaus, new upper and lower knives Still in operation: Yes

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

R26115/18 VITS Impregnating- and coating machine model: IPA / S / II age: 1996 working width: max. 2200 mm, min. 625 mm available: immediately for finishfoil and edges heating thermal oil 250 ° dryer control 80 - 220 ° impregnating unit coating unit rewinding with thermal oil boiler material: decor paper and similar papers 30 - 240 g/m² Available: sofort

R25532/08W Cosmos Vega folder gluer model: 145 age: 2003, full overhauled 2010 available: immediately for corrugated board Available: sofort

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

90 KW / 50 Hz.

R26081/12 Jagenberg rewinder model: VII age: 1963 size: 1600 mm available: immediately material: paper and foil sleeve inner diameter:70 mm speedt: max. 500 m/min about 10 knives Available: sofort

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

4-color R21046/16 EDELMANN continuous stationery press model: Varioprint age: 1994 web width: 52 cm 4 printing units reel – to - reel slide-in: 4 x 16 2/3 4 x 12 3 x 16 unwinder/ rewinder: 120 cm revolving slide-in in all 4 printing units SCHOBER double tool BST colour monitor Available: nach Absprache

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

AGFA AccuSet 800 in great condition with Agfa Viper Rip, Resolution: 1200, 1800 and 2400 dpi - System includes all componentes: Accuset, Supply- & Takeup-Cassette, Apis-Cable, CDs, Software and Dongle. Including Techkon Densitometer for film. Just send us a mail and you will get more info and photos Available: now

AGFA Apogee Viper PDF-Rip including Dongle, CDs, APIS-Board and APIS-Adapter Available: now

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

AGFA Viper 1.9 Software-Rip including Dongle, CDs, APIS-Board and APIS-Adapter Available: now

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

Eccentric screw pump Manufacturer: Pumpenfabrik Wangen GmbH Type: 50 ST - V2A Serial number: 53-651 Material: V2A Flow rate: 10 m ³/h Operating pressure: 4 bar Revolutions: 470 RPM In very good condition!

used plants - full, used plants - EBAWE, used plants - SUMMER, used plants - WECKENMANN,

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

Concentrate evaporator - unused- This evaporator consists of 3 parts, which switched in series are: -Evaporator (58 pipes) -Capacitor (19 tubes) -Capacitor (48 tubes) Expiration: 32% concentrated Cheese Whey comes in a dry work of a cheese dairy. This vaporizer is the final link in the chain of drying and provides a high concentration in the final product by removing the remaining water in the dryer and creating protein powder. The falling film evaporators can be visited at any time! Since it is still unused, it is in top condition!

Make: BITZER Type: 6H-35.2 Conveyor volume: 110.5 m3/h Speed: 1450 rpm New Price on request

S13 - used approx. 10 m³ / 10,000 litres underground tank, steel tank, firefighting water tank, cistern. technical details: capacity: approx. 10 m³ / 10,000 litres material: steel tank weight: approx. 3 tons dimensions: approx. Ø 1.6 m x 5.20 m Used steel tank in good condition, coated in bituminous insulation or bitumen paint, underground storage tank, lid and connections on the top. The tank has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport or the excavation may be present on the outside. This container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it  ...

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg

Make: BITZER Type: 6F-40.2 Y Conveyor volume: 151.6 m3/h Speed: 1450 rpm Price on request

Manufacturer: Verpama Switzerland origin: Switzerland Dimensions: 9.0 x 0.55 white Verpama order number: 265

Used stainless steel coating pan made in Hungary by Vegyepszer. Drum volume 200 liters. Unit includes air fan. Drum dimentions diameter 1.1 m depth 45 cm.

Picker Rad View--Tomo with the following device components: generator Rad View 65 tube Dunlee DU 304 C004-30 0,6/1,2_year of manufacture 2004 vertical stand Pausch • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Make: BITZER Type: 6G-30.2Y-40P Conveyor volume: 126.8 m3/h Speed: 1450 rpm Price on request

2,57:1

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage Price on request

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage with switch box Price on request

2,91:1

4 pieces same batteries 24 V

Compressor Bitzer 4FE-28Y-40P

Compressor Bitzer 6JE-33Y-40P

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.

Fuel pump, Vasa 32 Part no. 165180, PEO-G030E LOrange Part no: 165180

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...