v 33 used for sale

Compressor type Champion 135 TS Volume 12.8 m³/min Properties: Identification number 449001/50 Order no. 50352400 Built-in compressor 50 Compression medium AIR Length 2400 mm Width 2400 mm Total height 2100 mm Weight 2480 kg Volume flow 12.8 m³/min Suction pressure 1 bar Step pressures 1.8 / 7 bar g Speed 1000 min ̄¹ Installed motor power 75 kW Motor revolutions 1000 rpm

Compressor COMPAIR L22 SR-10 Volume 2.86 m³/min Properties: Identification number 100016088/0009 Built-in compressor 6115 Order no. 10698941 Compression medium AIR/LUFT Length 800 mm Width 700 mm Total height 1400 mm Weight 355 kg Volume flow 2.86 m³/min Suction pressure 1 bar Step pressures 10 bar g Speed 3600 min ̄¹ Installed motor power 22 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz

core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m (60) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m (47) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m (61) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m (52) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 14012 Specifications: - Length approx. 3000 mm - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm - Total height of the ribbed plate approx. 185 mm -Underframe - Total height with base frame 730 mm - Weight approx. 3500 kg

: 570 : 365 turning length: 1000 mm control: Sinumerik 850 turning speeds: 2500 U/min spindle bore: 62 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: 6x2,5x2 m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press LEK 160

A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible.

-Fully hermethic motor compressor -Mech. Thermostat Cooling Capacity: 0.8kW Voltage: 230V/50Hz Pump power: 0.12kW Water tank: 6l

spindle turning speed range: 170 - 18000 U/min weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headsto ...

Vacuum packer VAMA Specifications: Type: VB 300 Year of Make: 2020 230 Volt / 50 Hz /0.35 kW Weight: 40 kg Chamber size: 320 x 350 x 160 mm Sealing bar length: 310 mm Max. bag size: 300 x 350 mm Machine design Completely stainless steel Compact, solid design Surface ground Corrugated acrylic glass lid 2 inserts for different height levels in the chamber High-performance pump with 8 m³ capacity Easy operation with the new SC12 control system Vacuum adjustable Welding time adjustable Stock machine, immediately available! Function checked, condition see original pictures.

Fully automatic slicer / slicer GRAEF VA 800 / Art.Nr. VA804DE-C3 Specifications: 230 Volt / 50 Hz / 2.4 A / 500 W Knife diameter: 300 mm Stainless steel knife including underframe trestle Machine with CERA 3 coating Machine weight: 75 kg Year of Make: 2017 Knife speed 229 rpm Cutting thickness: 0.5 to 10 mm Stacking up to 4 stacking trays Longitudinal and transverse compartments, variable up to 4 rows, and round shelf Carriage designed for up to 40 cm of food to be cut Condition, see original pictures! If you have any questions, email or call.

Manufacturer: ECOMATION Model: ECOBIO V Vacuum Dryer Year of Manufacture: 2017 Hours Used: Approx. 2500 h, vacuum pump

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

Our KVK 1S – Economic is our cheapest way to purchase a semi-automatic stretch wrapper. This is a demonstration system. Only the application and separation of the film has to be done manually with this wrapper. The model is sturdily built with a weight of 600 kg and is designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and foil slide, as well as the mechanical brake, you can adapt the automated winding well to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot windings. There are programs for "up only" winding, "up & down" (cross winding) and "rainproof" winding available. If necessary, the winder can also be controlled manually. If the winder is to be used in a different place in between, it can be eas ...

This plant is a small scale Cheese Facility that consists :, SMI Packer, 2 x Vacuum Cheese Packer, Cheese Cutter, Butter Churn 100 litres, Pasteuriser for 1000 litres per hour, Lobe Pump, Cheese Press, Work Tables Stainless steel, Cheese moulds, Cheese Vat with Planetary Cutters, Cheese Tables, Cheese Shelf’s, Fridges, Sale Point Fridges, The plant is sold as seen in good condition, contact us for a quote for this plant .

Height=1.15 m, Overall length= 0.6 m, Overall width= 0.8 m, Net weight= 155 kg,

Height=1.4 m, Overall length= 0.9 m, Overall width= 1.16 m, Net weight= 190 kg,

Height=1.33 m, Overall length= 0.8 m, Overall width= 0.73 m, Net weight= 120 kg,

Height=1.5 m, Overall length= 0.95 m, Overall width= 0.61 m, Net weight= 245 kg,

Height=1.16 m, Overall length= 0.55 m, Overall width= 0.68 m, Net weight= 138 kg,

Height=1.35 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 205 kg,

Height=1.32 m, Overall length= 0.75 m, Overall width= 1.7 m, Net weight= 155 kg,

Height=1.26 m, Overall length= 0.5 m, Overall width= 1.7 m, Net weight= 120 kg,

Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,

Height=2.51 m, Overall length= 1.3 m, Overall width= 3.25 m, Net weight= 1750 kg,

Height=2.2 m, Overall length= 1.15 m, Overall width= 2.05 m, Net weight= 1535 kg,

Manufacturer: Venjakob Model: HGS K Year of Manufacture: 2005 Condition: The machine is in ongoing production, is fully functional Dimensions & Capacity: - Working width: 800 mm - Working height: 920–960 mm - Passage height: 200 mm Conveyor technology: - Transport via belt - Feed speed: 3–8 m/min (infinitely adjustable) - Belt cleaning system: non-stick, without additional cleaning agents Extraction: - Dry extraction - Air flow: 4,000 m³/h - Extractor nozzle diameter: 400 mm Coating system: - 2-gun drive (Duo-Gun) - Gun control: LS 1 - 4x airless spray guns (Krautzberger KAA 1300) - 1 color wheel - 1 paint pump - Suitable for solvent and water-based paints Find more here - / Contact us at -

Rietschle Vacuum Pump TYPE: CEV3709-S4 (11) Built in 1993 Motor power 0.75 kW 2850 rpm 50Hz IP54

Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable, which, compared to the KVK 2 MA, is equipped with a cut-out for ground-level driving with a hand pallet truck. Only the application and separation of the film has to be done manually with this wrapper. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as an electromagnetic brake that can be controlled very finely via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot windings. There are programs available for "up o ...

: 250 m³/min : 200 mbar total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Our KVK 2 (MA) is a semi-automatic stretch wrapper with turntable, which can be built even more robust, better equipped and adapted to your requirements with more options compared to our entry-level model. Only the application and separation of the film has to be done manually with this wrapper. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as an electromagnetic brake that can be very finely controlled via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot windings. There are programs available for "up only" winding, "up & down" (cross winding), as well as "rain ...

Large-capacity system for climate testing with S! MCON Control Construction The system consists of the following main assemblies: - Walk-in, isolated test room - Air treatment room - Machine unit - Air conditioning system -Switchboard Test room The internals in the test room are made of corrosion-resistant material The test room can be illuminated, is accessible and has a condensate water and cleaning drain. Air treatment room The air treatment room is located behind the air deflector in the insulated interior. It contains the following assemblies necessary for temperature control and is accessible through easily removable plates. - Test room fans -Heat exchanger - Electric radiators - Ventilation device - Temperature probes In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified and circulated by fans. The air is sucked ...

Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm total power requirement: 2.2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop () Furnishing: - Spindle speed continuously adjustable in 2x switching stages - TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - NEWALL digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle tap ...

turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25-220/220-1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 185 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2420 kg. range L-W-H: 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change ...

turning length: 1500 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52,0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1400 kg. range L-W-H: 2530 x 1000 x 1450 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine ...

pressure: 85.0 t chamfer lenght: 2050 mm distance between columns: 1750 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec back stop - adjustable: max. 600 mm table width: 120 mm work height max.: 1050 mm Number of working hours: 28.500 h oil volume: 200 l operating pressure: 340 bar total power requirement: 14.0 kVA weight of the machine ca.: 9050 kg range L-W-H: 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition () with only approx. 28.500 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motoriz ...

bore capacity in steel (diameter): 60,0 mm arm length: 350 - 1.600 mm workpiece height max.: 665 x 1.250 mm turning speeds: 38 - 2.000 U/min spindle taper MT: 5 MK base plate: 960 x 1.760 mm threading: 42 M quill stroke: 325 mm total power requirement: 4,0 kW weight of the machine ca.: 3.800 kg. range L-W-H: 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50.0 mm throat: 360 mm bore stroke: 225 mm morse taper: 4 MK table:: 570 x 480 mm threading: M 42 Stahl turning speeds: 50-316 / 316-2200 U/min feed: 0.08 - 0.50 mm/U column diameter: 180 mm distance spindle /table: max. 580 mm distance spindle/base plate: max. 1185 mm total power requirement: 3.0 kW weight: 630 kg range L-W-H: 1020 x 750 x 2340 mm Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - Motorized table stroke - Coolant device - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial filling with Shell Tellus 46 - LED machine light - Digital speed display - Digital drilling depth display - Height-adjustable protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mm threading: 22 M bore stroke: 125 mm throat: 280 mm morse taper: 3 MK table:: 450 x 380 mm / 14er Nut turning speeds: 70 - 3.500 U/min feed: 0,1 / 0,2 / 0,3 mm/U column diameter: 110 mm weight: 320 kg range L-W-H: 500x800x2.100 mm total power requirement: 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing s ...

: 6.0 mm ST 40 : 3.0 mm VA : 30 - 140 Grad blade length: 200 x 200 mm table:: 900 x 990 mm work height max.: 940 mm Punching capacity: 35.0 in 6.0 mm ST 40 Throat / punching unit: 135 mm engine output: 4.0 kW weight: 1020 kg range L-W-H: 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad  ...

roll diameter: 51 mm Wheel width: 125 mm weight: 20 kg height adjustment: 560-975 mm Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35,0 mm bore capacity in cast iron: 40,0 mm throat: 320 mm threading: M 24 in Stahl morse taper: 4 MK bore stroke: 160 mm turning speeds: 65 - 3250 U/min table:: 500 x 420 mm throat: 320 mm weight: 375 kg range L-W-H: 600 x 870 x 2.170 mm Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve  ...

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 400 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 220 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.