v 33 used for sale

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 € : 160.19 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1500 mm : 1400 mm : 1850 mm : 345 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are four Pfaff sewing machines available: 1) Industrial sewing machine Pfaff 461. 2) Industrial sewing machine Pfaff 463. 3) Industrial sewing machine Pfaff 1445. 4) Industrial sewing machine Pfaff 3337.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 € : 200.83 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1600 mm : 1200 mm : 1800 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Option: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - the softw ...

General SKU309N504 MakeFalk Gmbh&Co KG No.24320 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell0.49 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface25m2 Tube capacity140 Ltr Number of tubes:64 Tube diameter25,4mm Tube length5000mm Wall thickness tubes1,6mm Max. temperature60 degr.C. Shell capacity317 Ltr Shell diameter356mm Shell length5000mm Max. temperature100 degr.C. Shell connectionsdn65 Cover connections(2x)dn80 Information LocationBarneveld Floorspace5,7x0,7 M Total height1,0 M Weight800 KGOther chemicalRubberBiotechnologyAgro ...

General SKU309N500 MakeFalk gmbh & Co. KG No.3304 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4571 (316Ti) Cover materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell1 Bar Working pressure tubes4 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface150.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface150,5 m2 Tube capacity830 Ltr U-typecheck Number of tubes:157 Tube diameter25mm Tube length(2x)5900mm Wall thickness tubes2,0mm Max. temperature100 degr.C Shell capacity1530 Ltr Shell diameterdia.711mm Shell length6370mm Wall thickness shell5mm Max. temperature100 gr.C. Shell connectionsdn500, dn80 Cover connections(2x)dn200 Information Loca ...

General SKU309N517 MakeFalk Gmbh & Co KG Bendorf No.3301 Year of construction2007 LocationBarneveld Pressure Working pressure shell2.5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface81.3 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel Heat exchangercheck Heating surface81,3 m2 Tube capacity525 Ltr Number of tubes:126 Tube diameter25mm Tube length3900mm Max. temperature100 gr.C. Shell capacity1140 Ltr Shell connections(2x( dia.150mm Cover connections(2x) dia.100mm Information Floorspace5,5x0,9 M Weight2170 KG Extra SpecificationsThe material of the shell and tubes are 1.0345 (P235GH) Other chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersShell and tube heat exchangersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeti ...

General SKU309N516 MakeFalk Apparate- und Rohrleitungsbau gmbh&co KG No.3305 Year of construction2007 Mounted on legscheck Material Shell materialMild steel Tube materialStainless steel 1.4462 (318LN) Pressure Working pressure shell4 Bar Working pressure tubes1 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface49 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodytuv Heating surface49 m2 Tube capacity262 ltr Number of tubes:76 Tube diameter25mm Tube length3900mm Wall thickness tubes2,0mm Max. temperature165 gr.C. Shell capacity503 ltr Shell diameter508mm Shell length4070mm Wall thickness shell6,3mm Max. temperature165 gr.C. Shell connectionsDN65, DN40 Cover connections(2x) DN100 Capacity3,9 m3 Information LocationBarneveld Floorspace5,0x0,8 M Total height1,4 M Weig ...

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 180 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 225 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 325 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3306b-generator-22 5kva-used/476, , = More information =, , Empty weight: 6.000 kg, Type number: 3306B GENERATOR 225KVA

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 180 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 225 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 325 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3306b-generator-22 5kva-used/611, , = More information =, , Empty weight: 6.000 kg, Type number: 3306B GENERATOR 225KVA

Complete reconditioned Caterpillar 3304 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 02B: 7N3272, 05B: 7N3278, 07Z: 1167579 1259359 1259360 1266209 1298178 1322010 0W0178 0W2002 0W2254 0Z7504 2W1876 2W3989 2W4485 2Y8607 2Y8609 3Q5155 4P2393 4P2394 4P4246 4P4247 4P4253 4P5557 4P9154 4P9308 4Q5014 4Q5161 5R4901 5R5450 9Y1721 9Y3047 0Z7863 0Z8210 1079408 1079409 1079410 1157533, 09Z: 1167590 1167591 1167592 1167598 1W4584 2W0098 2W4485 2W6099 2W6100 4P0903, 10E: 1118013 1118014 2310150 1W3871 1W3875 1W3876 1W3877 1W3880 1W3883 1W3885 4W3918 4W6878 4W7765 9Y6208, 12Z: 602529 1148904 0Z8258 1N3062 1N3063 1W4 ...

Complete reconditioned Caterpillar 3306 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 08Z: 1373598 2123756 0W0997 0W1007 0W1766 0Z5948 0Z7485 0Z7500 0Z7665 0Z7771 0Z7860 0Z7900 0Z7915 0Z9864 1N3060 1N3061 1W0542 1W0543 1W0544 1W1342 1W1344 1W1346 1W2630 1W3210 1W3225 1W3231 1W5821 1W6092 1W6093 1W9098 2W0817 2W0818 2W0819 2W0820 2W4483 2W4486 3Q5034 3Q5466 3Q5755 3Q5767 3Q6852 4P7467 4Q5200 4W8491 5C5604 5C6813 5R6935 5R7776 5R7814 5R7956 5Z4836 5Z5151 5Z5168 5Z5358 5Z5912 5Z6635 5Z6854 5Z7500 5Z7665 5Z7860 5Z7900 5Z7915 5Z8438 5Z9020 5Z9864 5Z9904 5Z9917 6N3055 6N5908 6Z7065 7C0501 7C1426 7C1959 7C2032  ...

General SKU332X709 LocationBarneveld MakeArpuma Speck TypeVH600-53-60-032 Mach.No.1001736779 Pressure Working pressure0.01 Bar Main Features MaterialStainless steel Volume600000 Ltr. Motor22 KW Specified Features - Vacuum pump MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity616 m³/h With motor22 kW, 400-690 volt, 1470 rpm, (Ex) InletDN80 OutletDN25 Information Year of construction2018 Mounted on framecheck With switchcheck CEcheck Floorspace2,90x0,90 m Total height2,10 m Weight850 kg ATEX compatiblecheck Extra SpecificationsWith seperator vessel, volume 120 l. pressure -1/10 bar, allowable temperature 0°C/+90°C, : flow valves, pressure meter, flow meter, : suction cap. 350 m3/h, cool medium, water Vacuum pumpsArpuma SpeckPumps > Vacuum pumpsBrand > Arpuma Speck What you can expect from Foeth: -- M ...

General SKU332X714 LocationBarneveld MakeKörting Hannover No.210-4-32860-3 Mach.No.210-4-32860-3 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 Information Year of construction2014 Mounted on framecheck Total height2,10 m Floorspace2,80x1,10 m Weight1100 kg ATEX compatiblecheck Extra SpecificationsWith: - seperator tank, volume 125 l. - condenser, volume 140 l., 0/+185°C Vacuum pumpsKörting Hannover AGPumps > Vacuum pumpsBrand > Körting Hannover AG What you can expect from Foet ...

General SKU332X715 MakeKörting Hannover Mach.No.210-4-32860-3 Year of construction2014 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 Vacuum pumps Heat exchangercheck Horizontalcheck Tube capacity60 l. Number of tubes:64 Tube diameter17 mm Tube length2200 mm Max. temperature0°C/+80°C Shell diameter300 mm Shell length2400 mm Max. temperature0°C/+185°C Shell connectionsDN40 Cover connectionsDN80 Information Mounted on framecheck LocationBarneve ...

General SKULT0102 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume255 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 Notified bodyHINKE Tankbau GmbH Capacity190 l. (255 l.) Vessel sizesø 641 x 879 mm Dished topcheck Dished bottomcheck OutletG1 Max. temperature—10 / 95 °C With paddle stirrercheck Magnetic ZETA, Type BMRT 80 PI Ex S Dk Y Motorcheck With variable speed drivecheck Speed mixing shaft125—930 rpm Information TypeSolvent Tank Year of construction2021 Mounted on legsmobile skid With switchcheck With switchgearcheck Total height+/- 1.5 m Extra SpecificationsThe tank is equipped with :a pressure gauge, :a temperature sensor, and :level swi ...

General SKULT0101 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 Notified bodyHINKE Tankbau GmbH Capacity350 l. (460 l.) Vessel sizesø 791 x 696 mm Dished topcheck Dished bottomcheck OutletG1 Max. temperature—10 / 95 °C With propellor stirrercheck Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y Motorcheck 0,18 kW 230/400V 2825 rpm (Ex) With variable speed drivecheck Speed mixing shaft75—540 rpm Information TypeFluent Tank Year of construction2021 Mounted on legsplatform With switchcheck With switchgearcheck Total height± 1,7 m ATEX compatiblecheck Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor, level  ...

electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

RECON Part number: 1216 3892 Engine number: 234.12.03352 Std. size ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 1230 0506 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw

Used Used Shrink Wrapper IP Vacuum Pump: Year: 1995 Condition: Good Used Shrink Wrapper IP Vacuum Pump Year: 1995. Speed: 2.500 bph. Model: am 60. Sealing bar Safety protections. Code: F 29 More details: https://bottlingscout.com

Steel tubes ST 37 galvanized, thick-walled, 5 mm material thickness, Diameter = 57 mm, Length = 3360 mm Unused, partly slight flash rust, slightly dirty, photos are older. Price for individual purchase, quantity discount possible from 25 pcs., approx. 150 pcs. available.

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

Control: Fanuc Profesional 5 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Control: Fanuc Profesional 3 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L Year of construction 2013

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Sisu/Valmet Engine Type=612DSE,135KW,new factory repair Replacement motor with starter+alternator,new,TOP condition 1 year warranty ! email=info@miw-zeven.de

Valmet/Sisu Engine Type=612 DSE-135KW, Factory Repaired Engine with starter+alternator.New TOP-MOTOR ! info@miw-zeven.de

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Volvo-Penta AD41A/B heat exchanger cpl.overtakes. info@miw-zeven.de

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

; ready for operation

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

Mixproof valve DN80, with welded valvehousing and balanced bottom channel. 3 pieces available Yom 2006, excellent condition.

COAX valve, see picture attached

The steam humidifier Defensor Mk5 is a pressure steam generator. It works on the principle of resistance heating. It is designed to directly (with ventilation) and indirect (corded steam distribution) humidifying of the air in conjunction with ventilation systems and air conditioning. Parameter Air Fan: Voltage: 200-240 V 50/60 Hz power consumption = U: P 26 W = maximum steam output: 16.0 kg / h Parameter MK5 Visual VE 8: 400V/3/50-60Hz, 6.1 kW

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

5.8 m3/h 0.25 kW

Vortex Flowmeter 8800, F020SD1N3D1I1M5, Rosemount, EEx, new Manufacturer: Rosemount Type: Vortex 8800, F020SD1N3D1I1M5 Ex protected Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.