v 33 used for sale

Key data: 40 mm, 6 kg

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Dissolver Vollrath EWFX 60 Power 44 kW Speed range 200-1200 1/min Double-toothed pulley with wall scraper as good as new control cabinet with FU Very good condition, straight from production

Mast rollers, forklift mast, ball bearings -Quantity: 3 pieces available -Price: per piece -Weight: 2 kg

VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available

plug socket -5x: 7000-08351-0000000 -5x: 7000-08321-0000000 -4x: 7000-08361-0000000 -5x: 7000-08341-0000000 -5x: 7000-08371-0000000 Price: complete -Weight: 2 kg

Combined surge arrester module Blitzductor, Profibus single module, for PLC control, lamp holder -3x: 919670 -3x: 919562 -6x: 919506 Price: complete -Weight: 0.5 kg

Screw clamps with shaft, pipe clamps, pipe fastening -DN: 10/12 -DN: 20/22 -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg

Annular seal in link chain design, pipe sealing cushion -Various: Diameter -Can be used as a wall penetration, tank embedding and casing pipe sealing -Transport dimensions: 600/500/H350 mm -Weight: 35 kg

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction: Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35 Year of construction Refurbished in 2023 Location: Solingen Weight approx. 2,000 kg with substructure and drives Country of origin: Germany Delivery terms ex works

Machine type: Kieserling VRM 20 Flow Direction: Right to Left Target speed with 3-speed manual transmission, m/min 37.5 / 50 / 75 Main operation 1.5KW Make Kieserling, type VRM 20 Location: Solingen NRW Length 2,200 mm Width 500 mm Height 1,700 mm Weight approx. 600Kg Country of origin: Germany Delivery condition Ex-works Solingen, free loaded truck

Milk pipe fittings, milk pipe nuts, stainless steel fittings -9x Size: DN 65 -9x Size: DN 80 -5x Size: DN 100 -Screw connection: 23 Price: complete -Weight: 12 kg

Terminal block, terminal block, feed-through terminal block -5x: 165 113 16 -8x: 111 035 05 -4x: 115 129 14 -4x: 165 130 23 -14x: 112 579 24 -4x: 115 124 07 -4x: 165 115 10 -1x: 116 298 27 -3x: 115 142 11 -1x: 115 120 17 Price: complete -Weight: 38 kg

Machine Type: Kieserling Six Roll Straightening Machine Working range from Ø 18 mm to Ø 100 mm Flow direction: from left to right Speed 37.5 / 50 / 75 m/min. Make Kieserling, type VRM 75 Location Solingen Length 1,970 mm Width 980 mm Height 1,900 mm Weight approx. 3,900 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is completely overhauled by our specialist company.

Sensor module, G2 flat module, safety switching device -1x: HR-121126 -1x: VAA-4E-KF2-ZE -3x: KFA6-ER-16 Price: complete -Weight: 3 kg

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 3 to Ø 20 mm Flow Direction Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 000 Weight approx. 800 kg Country of origin: Germany Delivery time approx. 8 weeks

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg

Machine Type: Kieserling Six-Roll Straightening Machine Working range Ø 6 to Ø 60 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 60 Weight approx. 3,800 kg Country of origin: Germany Delivery time approx. 12 weeks

Machine Type: Kieserling Six Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35/45 Location Solingen Weight approx. 2,800 kg Country of origin: Germany Delivery time approx. 12 weeks Delivery condition ex works Other: Important: the machine is currently being overhauled by our company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Drill bushings -10x Type: Z10W/36/15 -10x Type: Z10W/36/30 -9x Type: Z10W/36/10 -9x Type: Z10W/36/9 -10x Type: Z10W/36/14 Price: complete -Weight: 4 kg

Key data: 200 mm

used press brake Trumpf TruBend V200 + BendMaster 60 Year of construction 2004 Pressing force max: 2000kN Stroke max: 365 mm Operating pressure max:340 bar 1 piece B0401A0009 = BendMaster 60 1 piece B0106A0073 = TRB V200-6A 1 piece of protective housing incl. lighting 1 piece of BendMaster roadway 14 meters in 2 meter segments 1 piece of system control system trump

Disc cutter, saw blade, cutter -various: diameters -Type: HSS/E Price: per set -Quantity: 2 sets available -Weight per set: 3 kg

Disc cutter, saw blade, cutter -various: manufacturers -Various diameters: Ø 45 mm - Ø 90 mm, width 1 mm - 8 mm Type: HSS -Sale: only complete set -Weight: 8 kg

Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg

Radius cutter, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg

end mill, end mill, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Price/Sale: complete -Quantity: 7 pieces -Weight: 9 kg

fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg

ThermoRoll oven Heuft VTR 10.12,5.10 Thermo oil -Thermal oil ovens -Manufacturer: Karl Heuft GmbH - Type: VTR 10.12,5.10 -one oven is for 2 rack trolleys of 10 editions each -Sheet size 58x98cm -Furnaces with exhaust hood -Built in 1998

MIG/MAG hose package extension, intermediate hose package -Length: 33 m -Version: Dinse plug, gas hose, control cable -Weight: 72 kg

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

C - Bow, Type Ziehm Vison Solo Very good technical and optical condition

resistor, wire potentiometer, resistor -Type: 208-8 56R 10% R -Price/Sale: complete -Quantity: 260 pieces available -Weight: 1.2 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.55 kW -Speed range: 8-72 rpm -Motor: adjustable -Drive shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 650/203/H220 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20/40 rpm -Power: 0.15/0.28 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 54 -Dimensions: 520/210/H240 mm -Weight: 27 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

Key data: 750 KW, 938 kVA, 400 V

MWM Emergency Power Generator TBD602-V16 Diesel emergency generator from 1980, operating hours are unknown, complete with controls, muffler, radiator, expansion tank and day tank. 1 available from 04/24 624 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: AVK DIDB 120/1109/40, 780 KVA Manufacturer: MWM Model No.: TBD602-V16 Type: Diesel Generator Set Serial number: 80 79 53 Power [KW]: 750 Year of construction: 1980 Hours: unknown AC Generator AVK DIDB 120/1109/40 Manufacturer: AVK Model No.: DIDB 120/1109/40 Type: AC Synchronous Generator Serial Number: 807953 Power [KVA]: 780 Voltage [V]: 10,000 / 5,770 Frequency [Hz]: 50 Electricity [A]: 51 Speed [1/min]: 1,500 Year of construction: 1980

Used self-cleaning disc centrifuge by VEB type SMZA71. New 1977. Capacity 20000 L. 4800 rpm.

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk, solid rubber tire with rim -Tire size: 120 x 410/550 -Hub bore: Ø 68 mm -Bolt circle: Ø110 mm x 18 mm -Quantity: 1 piece available -Dimensions: Ø 550 x 120 mm -Weight: 33 kg

Balance weight, wheel weights, balancing weights -25g -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg

EHT VarioPress 175-35 CNC press brake was built in 2004 in Germany by EHT Werkzeugmaschinen GmbH (now TRUMPF). Currently, the machine is installed 50 cm below floor level, and the new installation requires either a recessed area to be prepared in the floor beneath it or a platform to be built for the operator. The machine is designed for precision machining of workpieces with a maximum length of 3550 mm. The machining process is performed with a high press force of 175 tonnes, which, combined with an extremely stable design, guarantees excellent bending results, even during the most intensive challenges. All this is complemented by the advanced CYBELEC control system, which significantly facilitates the daily operation of the machine. The EHT VarioPress press brake weighs 14900 kg. Technical specifications of the EHT VarioPress 175-35 press brake - CNC controller: CYBELEC DNC 1200 ...

Sander Vario Master 9480 strapping machine Manufacturer: Sander  Type: Vario Master  Model: 9480  Type: Vertical Strapping Machine  Operating voltage: 400 V Power: 2 kW Control voltage: 24 V

Key data: 1630 mm, 860 mm, 760 mm

Basic machine data Used 3-axis machining center from HURCO Make: HURCO Type: VMX64 Year of Make: 2006 Condition: Used - In working order Control: Name: HURCO Ultimax 4 CNC Track Control Drive power: 285 kW Travels: x-travel: 1630 mm // y-travel: 860 mm // z-travel: 760 mm Technical data: • Spindle 25-8000 rpm • SK 50 interface • Clamping table size: 1650 mm x 9000 mm • 32-fold tool changer • Feed range: 1-18000 mm/min • IKZ • Dividing head type Kitagawa NC 300 rotary and swivel table • Chip conveyor The machine is in good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Stock number: 3880 PROCESSING Manufacturer: Johnford , Type: VMC 824 Machine NO.: 49208455, Year of manufacture: 1992 Specifications: Table size 1100 x 400 mm Longitudinal movement (X) 900 mm Transverse movement (Y) 500 mm Vertical movement (Z) 570 mm Spindle cone BT 40 Spindle speeds 36-6000 rpm Spindle motor 7.5/5 Kw Tool changer 24 places Control Fanuc OM Fabr. Operating hours spindle 4412 hours Length: 3100 mm, Height: 2850 mm, Width: 2350 mm, Weight: 5000 kg