v 33 used for sale

Battenfeld Calzoni Hydromotor MRE5400/5401/33800 A1640538

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary

; Gross weight [kg]: 3524; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 610

TECHNICAL DATA: Type: 5-color digital UV inkjet press with separate white print unit Length: 4550 mm Width: 1750 mm Height: 2200 mm Weight: 3000 kg Electrical power consumption: 39 kW / 60 A Electrical supply: 400 V, 3 Ph, 50 Hz Auxiliary power: 230 V, 50 Hz (chiller) Air consumption: 100 NL/min Cooling capacity requirement: 18 kW (60,000 BTU/h) Data interfaces: USB 2.0, Ethernet COOLING UNIT (RECOLD RE-C 160 INERT) Cooling capacity: 16,000 W Refrigerant type: R134a Refrigerant charge: 4.5 kg Power consumption: 8.5 kW Maximum current: 15 A PRINTING TECHNOLOGY: Technology: Piezo DOD Printheads: Xaar 1001 Resolution: 720 × 360 dpi UV DRUING SYSTEM: UV lamps: • 1× Hönle UV GOZ, 7.2 kW • 1× Hönle UV FOZ, 7.2 kW Pinning: LED pinning after print units 1 and 5 Exhaust system: integrated lamp cooling and odor reduction unit INERT GAS CURING SYSTEM: Type ...

Spindle circle 165 mm Interface Gildemeister GM 16 AC

; Gross weight [kg]: 5500; Engine: DC09 072A/02-13; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, , - Stage V version available: DPX--21008, + €34.500; Water Tank Volume [l]: 1200

5 Colors Digital Printing Machine for Processing Roll / Role CMYK printing system based on DOD technology with UVLM based inks. With separate printing unit for white Material width = 350 mm, Print width = 330 mm, Repeat = 10 - 1000 mm, Speed max. 48 m/min, Printing Technology = Piezzo DOD Printheads – Xaar 1001 Resolution =720x360dpi, Drying = 1xUV GOZ and 1xUV FOZ from Höhnle with 7.2KW Pinning System (LED) after Pressure Unit 1+5 Ink UV – based and UV drying Material = coated and uncoated paper, white and transparent film PP, PE, PVC, POPP, aluminum foil, Unwinding max. diameter 610 mm / sleeve 76 mm, Winding max. diameter 610 mm / sleeve 76 mm, PC controlled. Accessories:  Path control, Corona cooling system for UV lamps,

Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...

Robosoft 338-0145V2

Robosoft 338-0174V8

Robosoft 338-9201V10

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

; Gross weight [kg]: 1574; Accessories: SAE 1

; Gross weight [kg]: 100; Accessories: SAE4#7, 5

Caterpillar 3306 Generator Set Available for Sale. Make:Caterpillar Type:3306 Serial Number:85Z11295 KW:142 KVA:144 RPM:1500 VOLT:380 HZ:50 Year:1993 Running Hours:2172hrs

; Gross weight [kg]: 1500

; Gross weight [kg]: 2100

; Gross weight [kg]: 1836

; Gross weight [kg]: 944

; Gross weight [kg]: 1414

; Gross weight [kg]: 854

; Gross weight [kg]: 652

; Gross weight [kg]: 560

; Gross weight [kg]: 594

; Gross weight [kg]: 385

; Gross weight [kg]: 344

; Gross weight [kg]: 152

; Gross weight [kg]: 116

; Gross weight [kg]: 100

; Gross weight [kg]: 270

; Gross weight [kg]: 236

We offer a Doka Framax Xlife plus 330 package 254.10m². Formwork cleaned, checked. Formlining SB 2/3 Original Doka Xlife formlining, ready for immediate use. New value PL 2025/ 26 Doka 276.626,20€ Special net price = 93.744,68€ Pcs. Description 30 Framax Xlife plus Element 1.35x3.30m 10 Framax Xlife plus Element 0,90x3,30m 10 Framax Xlife plus Element 0,75x3,30m 8 Framax Xlife plus Element 0.60x3.30m 8 Framax Xlife plus Element 0.55x3.30m 8 Framax Xlife plus Element 0.45x3.30m 8 Framax Xlife plus Element 0.30x3.30m 8 Framax Xlife plus inner corner C 30/30cm 3.30m 8 Framax outer corner 3.30m 120 Framax Xlife plus Anchor 20.0 15-30cm 120 Framax Xlife plus Anchor Nut I 20.0 120 Framax Xlife plus distance protection NG 250 Framax Toggle Clamp RU 20 Framax Uni-Clamps 10 Framax compensating clamps 16 Framax Console 90 XP 16 railings 1.00m 2  ...

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland

: 36/72 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm dimensions of saw-band: 3650x27x0,9 mm total power requirement: 1,5/1,8 kW Overall size: 2130x1400x1950 mm Weight: 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3320x27x0,9 mm : 40/80 m/min : 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm : 260 mm : 250 : 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm : 200 mm : 180 mm : 200x160 mm weight of the machine ca.: 640 kg dimensions of the machine ca.: 2140x1300x1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 3000; Front tyre size: 195/50-R13; Rear tyre size: 195/50-R13; Vehicle outer dimensions [m]: 4,83x1,86; Cargo space dimensions [LxBxH]: 3,3x1,8; Max payload [kg]: 2481

: 330 mm : 330 mm : 400x330 mm saw band length: 4570 x 34 x 1,1 mm table height: 800 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 2,35 t dimensions: 2,23 x 2,15 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3320 x 27 x 0,9 mm table height: mm band speed: 40/80 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 3400; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1055; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 87

RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 330 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Dimensions: 485/53/H53 mm -Weight: 1.9 kg