v 33 used for sale

Rotary vane vacuum pump Manufacturer: Busch Type: RA 0100F Status: Preliminary Performance: 12 months Delivery time: by arrangement; ready for use

Rotary vane vacuum pump oellubene Manufacturer: Edwards Type: E2M28, E2M18 Inclusive: oil filling Status: Advance Performance: 12 months delivery time: by arrangement; ready for use

Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use

Rotary vane vacuum pump - 2 stages - oil lubricated Manufacturer: Leybold Type: Trivac D 40 B /BCS Cat.-No.: 11286 Status: Generalueberholt Suction power: approx. 40 m3/h Endduck: approx. 5x10e-3 mbar Performance: 12 months Inclusive: User manual and oil Delivery time: ex works If you need another pump or spare parts, we look forward to hearing your request.; ready for use

Control electronics for turbomolecular pumps (Turbotronik) (e.g. for Turbovac 361) Manufacturer: Leybold Type : NT 20 Status: over-prun & functional Delivery time: ex stock (intermediate sale reserved; ready for use

P57 - used appr. 3 m³ / 3,000 litres polyester tank / GRP tank, Staffelstein tank, aboveground, vertically standing, good condition. capacity: appr. 3 m³ / 3,000 litres material: polyester / GRP height: 2.40 m width: 1.04 m length: approximately 1.60 m (with lid 1.80 m) Aboveground, vertically standing tank, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rain collection tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write ...

Rotary vane vacuum pump oel lubricated Manufacturer: Edwards Type: RV 12, RV 3, RV 5, RV 8 Motor: 230V Including: oil filling Status: Advance performance Performance: 12 months Delivery time: ready for use; ready for use

Rotary vane vacuum pump incirculation lubricated: Busch Type: R5 RA 250D Status: Pre-performance Performance: 12 months Cleaner: Mineraloile Supply: Intake filter Delivery time: from stock; ready for use

Screw vacuum pump Manufacturer: Busch Type: NX 450 A Suction plugs: 450 m3/h Performance: 12 months Including: operating instructions, oil filling Status: as available as new date: by arrangement; ready for use

Rotary vane vacuum pump oil lubricated 2 stages Status: Generalueberholt Performance: 12 months Manufacturer: Leybold Type: Trivac D16B suction glitgings: approx. 16m3/h end pressure: approx. 5x10e-3 mbar Engine: 400V DS equipment: mineraloil Zubehoer: user manual Oel-fog separator optional Delivery time: by arrangement (intermediate sale reserved) spare parts, equipment or alternatively pumps on Request.; Ready

Nestro ATEX - Rotary valve Product Name: Rotary Valve Type: 371004 Manufacturer: Nestro Lufttechnik Serial Number: SA0000427 Year of construction: 2022 Condition: used and refurbished Technical details: - new gear oil - New ATEX rotary sealing lips - new colour scheme - Refurbished housing - V nominal: 45 m³/h - Dimensions (L x W x H): 1,870 x 630 x 360 mm - Inlet and discharge opening (L x W): 1,500 x 300 mm - Transport dimensions (L x W x H): 1,870 x 800 x 510 mm (on pallet) - Weight: 165 kg (185 kg on pallet) Engine data: - Voltage: 230/400 V - Current: 4.25/2.45 A - Frequency: 50 Hz - Power: 1.1 kW - cos φ: 0.79 - Torque: 600 Nm - Speed: 1,412/12 rpm Price: on request (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of e ...

Scroll vacuum pump Status: used, over-checked, functional Manufacturer: Edwards Type: GVSP 30 Motor: 400V Equipment: Mineraloel nominal suction digesters: 30 m3/h End pressure: <0.01 mbar (abs.) Including: user manual

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Rotary vane vacuum pump & oil lubricated Number: 5 pcs Status: Generalueberholt Performance: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60Hz 400V engine rated power: 4KW nominal suction digesters: 160m3/h end pressure: 0.5hpa(mbar) Inclusive: operating instructions, spare parts list delivery time: from stock; ready for use

Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Status: Generalueberholt Gewawt: 12 months Inclusive: Oil filling (mineral oil), operating instructions with voltage: 50/60Hz 230-400/460V Engine nominal: 4 KW N.-Suction 200 m3/h final pressure or gas balast: approx. 0.08 mbar delivery time: from stock; ready for use

- Please note! Price per piece! - Suitable for several motors - LS-4000 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes int ...

Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 300 Cat. No.: 10931 Status: Generalueberholt Gewast.: 12 months Including: oil filling (mineral oil), operating instructions with list of parts Voltage: 50/60Hz 230-400/460V Engine nominal: 5.5 KWfinal pressure or gasbalast: approx. 0.08 m bar Delivery time: ready for use; ready for use

Rotary vane vacuum pump oellubene Manufacturer: Busch Type: RA 0016C Including: oil filling Status: advancer Performance: 12 months delivery time: by arrangement; ready for use

Rotary vane vacuum pump - Oil lubricated Manufacturer: Leybold Type: Sogevac SV100 Voltage: 50/60Hz 230-400/460V N .-Suction Gasbalast: approx. 0.1 mbar (99.9% Vacuum) Status: Generalueberholt Performance: 12 months Operating instructions with supply list Delivery time: by arrangement; ready for use

Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.

Rotary vane vacuum pump oel circulation lubricated single-stage Status: used, over-prueft, functional Manufacturer: Rietschle Type: CLFH 141 (01) engine: 400V equipment: mineraloile nominal suction digesters: 140 m3/h end pressure: <0.5 mbar (abs.) Including: user manual oel filling

100L stainless hopper, adjustable fill size on mobile stainless frame

- Ganged Valve MWM 12301106 - Suitable for several motors - Please note! Price per piece! - 12301106 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new t ...

- Valve bridge MWM 12129392 - Suitable for several motors - Please note! Price per piece! - References -> 12136467 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and int ...

Rotary vane vacuum pump lubricated Performance: 12 months Manufacturer: Leybold Type: Trivac D8 B and type BCS available Cat No.: 11296 Status: Generalueberholt and repainted Suction power: approx. 8 m3/h Endduck: approx. 5x10e Operating instructions Delivery time: from stock Please contact further details or technical advice via enquiry; ready for use

Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V nominal suction digesters: 300m3/h End pressure: 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use

Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input

State of and exterior absolutely new, general overhaul and repainted Performance: 12 months Manufacturer: Leybold Type: DK 100 Fabr. -No.: 11106 Motor: 400V DS Equipment: Mineraloel Including: User Manual Oel Mist Separator optional Delivery time: on request Photo showing a general-ordered DK200 ; ready for use

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1502 AV Motor: DS 400V suction power: 500 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Turbomolecular pump Manufacturer: Pfeiffer Type: TPU 2000S Status: Used Nr.: PMP01141/9007 A 12-month service is possible; ready for use

Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571

Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.

Rotary vane vacuum pump dry Manufacturer: Becker Type: VT 4.40 Condition: Generalueberholt Spannung 400V DS Suction valves. 40m3/h Performance: 12 months Delivery time: from stock Other pumps on request !; ready for use

K + G wetter SM 120 STL, 120 litres cutter, membrane keyboard, variable knife speed, 2 bowl speeds, mixing speed forward and backward, S + S knife head with 6 blades, unloading device, hydraulic loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

Barsso” vacuum tumbler Type 5 Bartumb NEW ! all stainless steel PLC control with 50 programs max. load : ± 500 kg adjustable speed from 0 up to 9 rpm with vacuum pump Büsch with water filter dimensions (l x w x h) : 2.550 x 1.300 x 1.650 mm

Waelzpistongeblaese Manufacturer: Leybold Typ: RUVAC WAU 1001 Cat No.: 11741 Suction plugs: approx. 1000m3/h Status: Generalueberholt Gewagewgewgewgewgewgew: 12 months Delivery time: from stock; ready for use

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

; ready for operation

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 1000 suction moulds: approx. 1000 m3/h Status: As new in original packaging Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list Further accessories by arrangement; ready for use

Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use

Felder Vertical Clamp (with mounted drill chuck) Technical details: - Table support dimensions: 400 x 160 mm - Table support can be rotated on both sides up to 45° (with degree scale) - Table height: can be changed from 960 to 1,010 mm (screw connection) - Horizontal right-left adjustment range: 230 mm (115 mm in one direction) - Adjustment range of the unit horizontally forward-backward: 110 mm - Max. drilling depth: 100 mm - Supplied with mounted drill chuck 1/8 - 5/8 F3 - 16 LB 16 S3 - Max. chuck mount: 16 mm - Max. spindle diameter (tool holder): 19 mm - 2 x quick-release device on the machine body Engine data: - Voltage: 380 V - Current: 4.5 A - Frequency: 50 Hz - Power: 1.1 kW - Speed: 2,850 rpm Dimensions (DxWxH): 700 x 1,250 x 1,900 mm Transport dimensions (DxWxH): 700 x 1,250 x 2,100 mm The machine has been completely cleaned, overhauled and checked ...

Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Kat. No.: 960863 & 960867 Voltage: 50/60Hz 400V End pressure: 0.8 hpa(mbar) Status: Generalueberholt Gewaehrleistung: 12 months Including: engine restocking, repainting, electric check delivery time: from stock; ready for use

CROSS-FEED SPLICER Width: 3400 mm

Dematic EPRE Vertical Lift Used goods built in 2019, very good condition, see pictures Transport height: 11 m Maximum speed 4 m/s Suitable for Multishuttle Dematic DMS2STATIC 34 pieces available. Negotiation price: from € 3.500,-/ piece net ex location Depending on the design and purchase quantity Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The following products of the plant are also available for sale: 300 x Dematic Multishuttle Strain Gauge 2 - 31.5 kg 350 m Dematic Sorter Flex Sort Crossbelt  ...

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: 251-512 Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use

Handtmann VF 628 vacuum filler with inline grinding system GD 93, filling, portioning, linking, monitor control, filling capacity 6.000 kg/h, pressure up to 72 bar, hopper volume 90/350 liters, arm lifting device, refurbished.

Rotary vane vacuum pump Manufacturer: Leybold Type: Sogevac SV280 Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Alexanderwerk HTC 65, 65 Liters bowl cutter, stainless steel Version, 2 knife speeds, 2 bowl speeds, 2 mixing speeds vorwards and reverse You are very welcome to inspect the machine at our facility in Koblenz, Germany.