v 33 used for sale

Saw pulley diameter: 914 mm (34 ) Saw pulley width: 90 mm (3,5 ) Max. sawblade width: 90 mm (3,5 ) Sawblade length: 5384 to 5587 mm Max. cutting height under the guide: 406 mm Max. opening feed rolls to sawline: 228 mm. Max. opening fence to sawline: 228 mm. Main saw motor: 15 kW Feedmotor: 1,1 kW Tabel height from floor level (with pit): 812 mm Total height from floor level: 2184 mm.

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

Drum crusher with hydraulic pusher Knife drum width: 800 mm Mouth 800 x 1200 mm Motor: 18,5 kW extraction connection diameter 200 mm

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

Generator set Condition: Used – unused Power: 350 kVA Availability: Available Description : Diesel generator emergency Generator : SDMO Range : Canopy Model V350 C2 Engine : VOLVO Type : TAD 1341 GE-B Year : 2023 Operating running hours : 9 H integrated diesel tank Price on request Groupe MMO, European leader in the revaluation of generator sets If you have a specific need or request, contact us: show contacts #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher #kta50

Agie Wire Cutting EDM Machine High-Precision Wire EDM System This 2018 Agie AC Progress VP3 represents top-tier wire electrical discharge machining (EDM), offering flawless contour accuracy and superior surface finishes for critical components. Technical Details ‍ 1. Machine identification data Name: Wire Cutting EDM Machine (Electric Discharge Machining) Manufacturer: Agie Model: AC Progress VP3 Machine number: 591.3.020.530 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 500 x 350 x 426 mm Travel (U / V): ± 70 mm Max. taper angle: 30° at 100 mm height Max. workpiece dimensions (X / Y / Z): 1050 x 650 x 420 mm Max. workpiece weight (without water): 400 kg Max. workpiece weight (with water): 800 kg Wire diameters: 0.15 – 0.33 mm Generator: IPG-VPC Max. cutting rate: > 500 mm²/min Best surface roughness: Ra 0.2  ...

This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit.

A wet glue rotary labeling machine Krones for bottles is available. Bottle formats: 1l/0.75l. Including various format parts and variable label magazine. An on-site inspection is possible.

A vibration and hose filter system Vaupel is available. Air volume flow: 3200m³/h, motor power: 3kW, speed: 2300rpm, filter area: 9m². An on-site inspection is possible.

• DataMatrix station for marking and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation) • Output max. 400 objects/min, belt speed 5 - 90 m/min • Datamatrix-code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Several other readable codes, a.o. pharmacode • Operation direction from left to right • Product take over by alignment belt, consist of lower (length 500 mm) and height adjustable top belt (length 400 mm) • Discharge belt length 500 mm • Product height max. 100 mm (optional 150 mm), product width 45 - 200 mm, max. product width incl. open flaps 240 mm • Bad ejection by blower nozzle with collection container • Ejection counter control • Central height adjustment for printer and camera • Light barrier for product identification (Trigger) • 1 LAN PCE camera Mini-smart, plain text/code control  ...

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camera: front (as-i ...

x-travel: 2134 mm y-travel: 1016 mm z-travel: 762 mm CNC-control: HAAS CNC Table dimensions: 2134 x 914 mm max. table load: 1814 kg spindle taper: SK 50 spindle turning speed range: 7500 U/min spindle motor: 22,4 kW feed range: 1270 mm/min rapid traverse: 15,2 m/min tool change unit: 30 Pos. coolant: IKZ voltage: 400 V total power requirement: kW weight of the machine ca.: 13,2 t dimensions of the machine ca.: 4,70 x 2,95 x 2,99 m chip conveyor: - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mm Cutting height: 480 mm Dimensions (L/W/H): 5200x1600x1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

The TBA 8 is one of the most reliable Tetra Pak machines around. The TBA 8 shown here is equipped for filling liquid foodstuffs with a volume of one litre of Slim. The machine is from development stage V 100. With an output of 6000 packages per hour, it corresponds to the standard speed of a TBA 8. The filling machine is overhauled by us in our own workshop in Germany. In the course of the work, many wearing parts will be replaced, and all electrical, pneumatic, hydraulic and mechanical systems will be checked. After the change of parts is completed, we start extensive testing to verify the flawless production of the machine. For this purpose, the system is fully connected and we produce sample packs filled with water during the final adjustments. In doing so, we can adjust the final details as precisely as possible. If you are interested in a TBA 8, we will be happy to send you an exte ...

Recommended as a line with PT 8, TCAP 47, Packer TCBP 70. Originally developed for 1.5 liters, this machine with this volume produces 6000 packs per hour. The V100 development stage and the special feature of the final sealer system, which requires one star, make the machine special. Smooth running and durability with consistent quality are the hallmarks of every TBA 8. After the extensive service check in our workshop, we pay particular attention to the correct settings of the system for reuse. It is particularly important to us to adjust mechanical and electronic systems flawlessly in order to avoid later malfunctions. The pneumatics and hydraulics of the system must be carefully checked and maintained. Many of our customers have already been able to convince themselves of this during the work. Even after many years, these systems are ready for further use after our overhaul. A cost-ef ...

The further development of the TBA 19 V10 was initially called V 20. The main changes can be seen at first glance in the control system and the final sealer. Like its predecessor, the system produces 7500 packs per hour in this format and does not differ from the TBA 19 V 10 previously known. The further development of the TBA 19 includes extensive innovations in the control and mechanics of the plant, which can lead to an improvement in efficiency in constant operation. As with all other machines, smooth and efficient operation requires consistent adherence to service intervals. The operator on the systems should be intensively trained and have sufficient experience in operation. This system also undergoes all the necessary tests and inspections before handover. Our customers are invited to this at any time in order to be able to inspect the machine in operation during the acceptance pr ...

The further development of the practical ReCap solutions in an even more user-friendly design. Better product flow makes it easier to use. The TCAP 21 ReCap 3 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 3 combines benefit and cost awareness in optimized product design. In addition, the product receives an optimized secure closure solution. Suitable options: conveyor belt system and cardboard packer with or without wrap around, tray shrinker and other equipment. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Tetra Pak Cardboard Packer 32, CBP 32, V40, in very good condition and workshop inspected and overhauled. Available now.

For sale here is a UPF Filter 50 exterior for the MWM 2020 V12 from our stock. Item number original: 12142719 Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional exper ...

Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details.

This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details.

A vertical bag packaging machine Aquarius is available. Bag width range: 80mm-250mm, max. bag length: 450mm, packaging capacity: approx. 140bags/min, bag material: film, packaging product: bulk goods/piece goods. An on-site inspection is possible.

Vacuum Reflow System VAC-L Plus manufactured in 2018. It features a comprehensive heating configuration with 5 preheating zones and 4 peak zones, along with a vacuum chamber measuring 450 x 510 mm. The typical conveyor speed is 1.3 m/min, and it includes a single lane chain conveyor. If you are looking to get high-quality reflow capabilities, consider the SMT Vacuum L Plus Vac machine we have for sale. Contact us for further details.

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

This 3-axis Rasi S 80.6 L G-V3C50 was manufactured in 2006. It can bend pipes with a diameter ranging from 4 to 82 mm and features a bending radius of 240 mm. The machine is lightly used and comes with many tools included. If you are looking to get high-quality bending capabilities, consider the Rasi S 80.6 L G-V3C50 machine we have for sale. Contact us for further details.

Vöest, E50/2000, Lining, Multifix, 15KW, Mas. No. 07351501

Optical measurement machine manufactured in 2009. This Zoller Venturion 600/8 features a maximum tool length of 800 mm and a maximum tool diameter of 440 mm. It is equipped with a tool holder for SK50 and SK40. With a maintenance contract in place and annual calibration performed, this machine is in good condition. If you are looking to get high-quality optical measurement capabilities, consider the Zoller Venturion 600/8 machine we have for sale. Contact us for further details.

Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture below left ! Other spindles on request !

Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture below left ! Other spindles on request !

This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details.

Pallets with baker's baskets / transport crates made of plastic in stable professional quality are offered in various sizes and colours. Ideal e.g. for bakeries, warehouses, logistics commercial kitchens, food production, gastronomy and catering. There are a total of 126 pallets with approx. 8000 crates, whereby these are handed over exclusively by pallet. Sizes and prices: 60 x 40 x 16: € 2.50 net per box 5 pallets = 240 pieces = 48 boxes per pallet = € 120 net per pallet 21 pallets = 2,016 pieces = 96 crates per pallet = € 240.00 net per pallet 60 x 40 x 8: € 2.50 net per box 1 pallet = 80 pieces = € 200.00 net per pallet 1 pallet = 50 pieces = € 125.00 net per pallet 80 x 40 x 10: € 2.50 net per box 77 pallets = 4,620 pieces = 60 crates per pallet = € 150.00 net per pallet 1 pallet = 35 pieces = € 87.50 net per pallet 80 x 40 x 15: € 2.50 net  ...

Compressor manufactured in 2021. This Atlas Copco GA 110 VSD+ features a power output of 114 kW and operates at an adjustable pressure range of 6-10 bar. It includes a refrigerated dryer model FD410VSD, ensuring efficient air compression. If you are looking to get high-quality compressed air capabilities, consider the Atlas Copco GA 110 VSD+ machine we have for sale. Contact us for further details.

Table dimensions: 1200 x 500 mm sanding belt measurements: 90 mm Weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

saw blade diameter: 300 mm cutting diameter: 90 mm stroke: mm turning speeds: 40/80 U/min total power requirement: 1,5 kW weight of the machine ca.: 350 Kg dimensions of the machine ca.: 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

The Tetra Pak TBA/8 110V is a proven aseptic linear filling machine for liquid foodstuffs, which is particularly known for its reliability. It is often used in dairies for UHT milk, juices or similar products.

Refrigerated Centrifuge " Dynamica " Model Velocity 18R - Maximum Speed 18,000 rpm : RCF 27070xg - LCD Display - Micro processor controller - Temperature range -20 to 40 C - Auto rotor recognition - Automatic lock rotor - 1 x FA15A Angle rotor 24 x 1.5/2 ml Speed 15,000 rpm , 21500xg - 1 x FA15C Angle rotor 6 x 50 ml - 6 x FA15.15C Adapter 6 x 15 ml Speed 15,000 rpm , 23,300xg CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove.com

Overview  This set of 2 inkjet coders was manufactured in 2021 by VIDEOJET. The machines were used for inkjet coding on glass bottles and were in service until September 2025 in a complete RGB line (330 ml). The units are currently stopped, still installed, with energy disconnected. They are available immediately and can be visited on request. Technical data  Capacity: 500 meters/min (up to 60,000 bph) Application: Inkjet coding for glass bottles Maintenance was carried out twice per year; the last maintenance took place in January 2025 Scope of Delivery  Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles

The TCAP 21 ReCap 2 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 2 combines benefit and cost awareness. In addition, the product is given a secure closure solution. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Key data: 1169 KW, 1500 1/min

Brand: MWM GmbH Model: TCG 2020 V12 Year: 2005 Type: Gas engine (CHP / power generation) Configuration: V12 (12 cylinders) Cycle: 4-stroke Fuel type: Natural gas / biogas Displacement: approx. 60 liters Turbocharged: Yes Cooling system: Water-cooled Power output: approx. 1,000 – 1,200 kW Operating speed: approx. 1,000 – 1,500 RPM Gas engine is with control panel, gasoline and pumps

Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. ...

A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible.

max. wheel diameter: 600 mm max. module: 6 range L-W-H: 2540 x 1500 x 1920 mm table diameter: 160 mm weight of the machine ca.: 3,6 t High-performance gear hobbing machine Tooth helix angle 15° Tooth width 270 mm Wheel diameter 620 mm Tooth helix angle 30° Tooth width 250 mm Wheel diameter 610 mm Tooth helix angle 45° Tooth width 200 mm Wheel diameter 500 mm Tooth angle 60° Tooth width 100 mm Wheel diameter 450 mm Maximum cutter diameter 105 mm Maximum cutter width 115 mm Clamping table diameter 420 mm Bore of clamping table 75 mm Depth of bore below table surface — mm Diameter of workpiece clamping wheel 450 mm of clamping mandrel 30 mm of milling mandrels 22–27–32 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg

7 pcs Index VD30 mounts with capto interface, 3 pcs driven by it, mint condition!