We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,899 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.
used
SKL regenerates turbocharger Manufacturer: VEB compressor construction Bannewitz (DDR) Type: R2 Equipment Nr. 2227-00008 Register-Nr. 256 n max 52000U/min t max 700 ° C m 95 kg Year of construction: 1973
used
Make: FRIGOPOL Type: RHLL/Hr0017 Compressor types: 2x30L-DLYB-7.5 7.5HP Electrical power 1x14L-DLYB-4.5 4.5HP Electrical Power Refrigerant: R404A Cooling capacity Total: 42 to 50kW at -10C Electrical power 18.8kW Volume flow: 74m3/h Price on request
used
lot of 6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 A furnace for 20 sheets Usable area of 10 m² or 12 m² 6 oven total total area 60 m² or 72 m² - 120Bleche Oven is in very excellent condition, General and thorough overhauled and tested. Works like new. Very good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler plant including. 40 piece rack Sales including freight and installation Price on request
new
gas-fired preheating furnace type: KA_GB working temperature: 600°C max. allowed furnace chamber temperature: 750°C cennected load (el.): 2,5 kVA gas pressure: 60 mbar gas type: natural gas heating power: 130 kW (max. 150 kW) external dimensions (approx.) (w x h x d): 2000 x 3530 x 2500 mm useable dimensions (w x h x d): 1100 x 1330 x 1500 mm
used
Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg
used
J.Vuille-Biel -blade circular saw machine: D. 160 mm -vise max. opening 30 mm -with or without feed / stroke max. 640 mm -roll band: 2000 mm -coolant system -machines size: 2400 x 650 x 1340mm -Controlled by air
used
Used press for powder made by Vetraco, model CP 024 S. Performance 300-2000 pcs/h depending on the size of the bowl and the formula powder. New 2007. Power supply: 400 V, 25 A, 50 Hz Matrix Upper: 260x173x15,1 / 17.35 Matrix middle: 160x173x17 Matrix lower: 222,8x138,8x12,1 / 37.75
new
The pictured furnace is a circulation chamber furnace. The furnace drives under a nitrogen atmosphere and acts as a stabilizing furnace e.g. for copper alloys. Furthermore, the products are scanned by a scanner located outside the cabinet and for the various products different programs can be stored. The controller automatically performs, provided for the product program. usable dimensions (w x h X d): 1000 x 1400 x 1300 mm temperature: 300°C, +/- 2K heating power: 72 kW
new
Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor
new
Integrated equipment for production of chocolate, chocolate cream and chocolate coating for ice cream. The fat is melted in the heated fat melting tank, then fat is dosed into the temperature controlled chocolate ball mill where is added sugar, cocoa powder and other ingredients, being milled for about 4-6 hours at a controlled temperature. In the first part of the process the tank is heated then cooled by tap water. After milling the chocolate is transferred to the chocolate storage tank. Fat melting tank 540l heating by water jacket and electrical resistor heated grid with 250l beneath the grid volumetric dosing pump controlled from switch board 0.55 kw, app. 200 rpm stirrer 13.1 kW - installed power 2 x 6 kW = 12 kW - heating resistors 0.55 kW water circulation pump stainles steel filter heated fat dosing pump Ball refining tank 500l working ca ...
used
4 pieces same batteries 24 V
used
Compressor Bitzer 4FE-28Y-40P
used
Make: Danfoss Type: SZ100S4VC Performer New Vacuum: - Pressure: 25bar - Temperature max: 54C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 32bar - Temperature max: 65C - Temperature min.: -35C - Volume: 3.25 litres
used
Make: Linde Type: VPM 505-4090 Refrigerant: R404A Built: 2005 Minus cooling Compressor 4pcs: 4pcs: Make: BITZER Type: 6F-40.2Y-40P Conveyor volume: 151.6 m3/h + 1pcs: Make: BITZER Type: 6FE-44Y-40P Funding volume: 152 m3/h Has been replaced, i.e. New Price on request
new
Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW
new
rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200°C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system
used
Make: BITZER Type: 44VCS-12.2Y-40P Tandem compressors 2 Compressors Type: 4VCS-6.2Y-40P Conveyor volume per compressor: 34.7 m3/h On metal scaffolding Price on request
used
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons
Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...
new
Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...
used
1 VOLLENWEIDER cleaning and shearing machine type SUPER DUPLO, width 210 cm
new
The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...
used
new
Electric motor with flange, IE2-WE1R 132SX2 TPM HW, 7,5 KW, 2925 rpm, VEM, new -65% Special price (The current new price in the market is € 1740 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - 400 / 690 V - 2925 rpm - 7,5 KW - 74 kg - shaft diameter 38 mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.
Line is equipped with the following: • 25 ton EAF w/356mm electrode & 16 MVA trsfmr (rblt 2006) • 25 ton LF w/305mm electrode & 3 MVA trsfmr new 2006 • 25 ton VOD/VAD w/305mm electrode & 3 MVA trsfmr23297 • 2-Strand VAI Caster new 1990's: Hand & Auto Controls 6 ton tundish (ladle) movable crystalizer electromagnetic stirrer • 8 ton ESR (2 pillars) w/4MVA transformer will produce 1 to 10 ton ingots • Dust collection system • 12.5 ton charging cranes • 50 ton ladle cranes • 12.5 ton service cranes • ingot moulds • ladles
used
1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min
used
PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production
used
Wire stitching machine VEB LEIPZIG P 66 Built in 1972 Machine No.: 66.72.126 1 staple head Functional The machine can be demonstrated in our warehouse - please make an appointment. Wire Stitching Machine VEB LEIPZIG P 66 1972 In 1972 Serial: 66.72.126 1 stitching head working condition Test is possible in our stock – just make an appointment. ••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. The machine can be visited in the warehouse. Can be visited in our stock. Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The machine is sold as it goes and stands. We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back. ...
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
1 piece NAUTA mixer MBX 20s -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of standard steel Virgin -Mixing screw steel Virgin -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin
used
1 piece NAUTA mixer MBX 20-R -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin
used
1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin
used
1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin
new
Electric motor with foot, IE2-WE1R 132S 2 TPM HW, 5.5 KW, 2915 rpm, VEM, new -70% Special (The current new price on the market is € 1990 excl. VAT) If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - 400 / 690 V - 2915 rpm - 5.5 KW - 57 kg - Shaft diameter 38 mm Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. However, we give you a functional guarantee. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.
used
Inner gear pump, internal toothed displacement pump chemical pump used Inner gear pumps are used to convey liquids of any viscosity. Also with abrasive dusts but without solid stake. e.B. oils, soaps, bitumen, tar, chocolate, molasses, cocoa butter, fat, glucose VARISCO/ ROTOTEC Type: V 85-2 SPG Flow rate at 190 rpm max approx. 15 m3/h Connections Inside approx. 100 Flange outside approx. 230 mm Gearmotor Lenze GST09-2M VBR 112C41 7.5 kW 190 rpm 400 V IP55 Dimensions: approx. 1400 x 400 x 470 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
Cabins of disassembly for the following machines: ISEKI SG incomplete ISEKI SF 300 330 333 ISEKI TX ISEKI 5000 / 5100 Gutbrod 2850 AS incomplete SABO 1502 Voss incomplete Ransomes 350 D incomplete Ransomes Commander 3510 Ransomes fairway 405 Shibaura CM reform Reform Muli - only door right side Kramer Tremo - only door right side
used
The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons
used
Varian Saturn 2100 T GC/MS system, used Ion trap with Turbo molecular pump Measurement range: 10-650 amu EGG Varian DS 102 backing vacuum pump complete with PC, LCD monitor, and software as well as NIST library Option autosampler: Varian 8400,CTC GC PAL or CTC PAL wagon
used
used
used
used
used
used
used
Lathe - cycle VOJUS Turntec controlled 63 bearing no 1105-02244 make VOJUS type Turntec 63 built in 1999 State second-hand machine control CNC SIEMENS 840 D storage France origin SK delivery immediately cargo base EX WORK technical details turning diameter 630 mm turning length 3000 mm control SIEMENS 840 D spindle bore 110 mm spindle speeds infinitely 2500 revs/min rapid traverse - longitudinal/plan 10/5 m / min dimensions L W H 3000 x 1800 x 1790 mm turning diameter over support 420 mm overall power demand 26 kW machine weight approx. 4,5 t description CNC - control SIEMENS 840 D SHOP TURN MULTI FIXED HOLDER 1 open, revolving bezel TURNING DIAMETER OVER SLIDE 420 MM BED 6300 TURNING LENGTH 3000 MM 2500 U/MIN
used
used
Cylinder head complete with nozzle cooling E and A 30 degree
used
Injection pump in Exchange