uv dryer used for sale

Key data: 75 , 12 , 12

We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Manufacturer: Blow Moulding s.r.l. Machine type: BM 2000 D (CoEx) Stations / Stations: Double / Double Year of construction / built: 1999 Location: Europe/ Europe Control type / control system: Original control (Microset) Number of extruders: 4 Extruder sizes: 60, 35, 60, 35 - (24D) Hose head / parison head: NEWMA 6-layer CoEx single-head (New) / NEWMA 6-layer CoEx single-head (New) Mould platen sizes (mm): 290 x 380 Flaschenvolumen Max. / bottle volume max.: 3,2 Lit. Clamping force: 55 kN Accessories: - Viewing strip extruder / Viewstripe extruder - 2x rotating wide neck edge/ 2x rotary trimming devices - 5 suction conveyors for material/ 5 suction conveyors for materials - 1 dryer on extruder no. 4 – EVOH 1 dryer on extruder no. 4 – EVOH - 1 dispenser on the extruder No. 1 – main batch 1 dispenser on extruder no. 1 – master batch - 1 dispenser on ex ...

3 compressors and a refrigerant dryer, Boge, S40 and S50, DS180 – second-hand - : Prices ex location (net): S40 /Year 1999: 1.950.-€ S40 /Year 2004: 2.450.-€ S50 /BJ 2004: 2.650.-€ DS180: Boge Compressed Air Systems offers three compressed air screw compressors and a cold drying system: Manufacturer: Boge Type: S 40 Machine No:30888 Year of construction:1999 Hours: 14,600 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 40 Machine No:46920 Year of construction: 2004 Hours: 28,400 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 50 Machine no: 30574 Year of construction:1999 Hours: 37,200 Pressure: 10bar Volume flow at 10bar: 5.40 m3/min Drive motor:37kW --- Refrigerant dryer Manufacturer: Boge Type: DS180 Machine No:398348580002 Flow ...

Screw compressor with integrated 300l air tank, air dryer and all of the needed filters. Advantages of Aflatek 3in1 20A: 15kW electrical motor. Integrated 300l air tank. Air and oil filters as well as oil separator already included. Low noise and vibrations level. Compact, vertical design. Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 15 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 2300 Air tank, L: 300 Dimensions(length x width x height), mm: 1400x750x1500 Weight, kg: 430 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x900x1600 Weight, kg: 450 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer:  ...

Floating sink system for separation-washing and drying of contaminated films etc. Floating sink container with cyclone for feeding and paddling. 2-2.5 cbm water volume Bucket elevator to dryer mechanical dryer MTM with 15.kw. B8dkee0iwp Material discharge with pressure blower 7.5kw. Heating 20 kw. Complete with control cabinet. Everything is checked and maintained before handover Inspection by arrangement.

Nilma Turboidrex vegetable washer and dryer Serial: 951154 Stainless veg washer and dryer, 90l drum capacity, washing capacity per cycle: leaf veg 4kg - heavy veg, fruit, meat 15Kg, wash time 3min, drying capacity 1Kg per 1min, 1Ph

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

- Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet. Due to temperature control of the oil, it can also be used in intermittent operation. Equipment DUO KK with refrigerant dryer and fine filter as pre-filter upstream of the refrigeration dryer Condensate conditioner for oil-water separation automatic condensate traps. ---------- Technical Data ---------- Container size: 2 x 100 litres, Effective delivery quantity approx. 380 litres, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg new exhibition machine

5 liter can filler with sealer, rinser and dryer, filling height control by weight control, Additional title: 5 liter can filler, Filling capacity: 540 Cans per hour at 5°C beer temperature, Number of valves: 18 , Operation / Control: Control SPS S7, Features: Filler: SEN Rola built in 1985; conveyors SEN/self made built in 1985/2002 incl. seamer rinser and dryer: self made built in 2002; balance for filling height control by weight control, Code: 11586

feed pressure: 10 bar Effective free air delivery: 490 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 246 kg. total power requirement: 4,0 kW range L-W-H: 1240 x 650 x 950 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 7.476 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 8-head capping machine also works very quickly, precisely and is suitable for aluminum twist-off caps. The vials are guided individually, which enables safe and fast filling and capping. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 8 | filling volume: max. 30ml per vial | speed of the machine  ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 1-head capping machine also works quickly, precisely and is suitable for aluminum twist-off caps. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 1 | filling volume: max. 30ml per vial | speed of the machine in neutral: max. 120 bottles/min (at 4 filling stations and 5ml per vial) | accuracy: =  ...

Pecom-Press-Center linear-RCI Roland Deltamatic damping Chambered doctor-blade Lightlox-screen-rollers PPL-Autoplate cylinder surfish-finished 1.828 mm Extend-delivery Prepared for IR/TL-module Roland Secomatic IR/TL End-dryer with 2 IR-dryer TL with 12

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

Perfector 1/5 and 6/0, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Refrigerator, Auto-Wash, Double Size Impression Cylinders, Roland Mabeg Jet Feeder, Steel Plate on Overlap, High Pile Delivery, Autosize, IR Dryer and UV Dryer, Standard Accessories

perfecting 2/3 or straight 5/0, CP 2000, Alcolor Vario, Autoplate, Combination device water cooled, Preset stream feeder, Extd. delivery 2 modules (X2), , ultrasonic double sheet control, powder device WEKO medium class, Compact antistatic device, airsupply AirStar Pro watercooled, dryer IR/UV water cooled, - 2 x UV interdeck dryers plus change positions, - end dryer UV-IR+HL

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Manufacturer: Bürkle, Type: Betonpflasterlackieranlage, Year: 2007, Finished product: Oberflächenbeschichtung, Work piece width min-max mm: 1300, Destacking plant: Vakuum, Inlet conveyor: mit Ausrichstation, 1 UV dryer lamps/Watt: yes, Conveyor belt/roller: Band, 2 paint roller: Bürkle SLC 1300, 2 UV dryer lamps/Watt: yes, wast cleaning: yes, Conveyour system: Band, Stacking plant: yes, Year :2007

Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,

Glue press Müro 4x5000A4 WT; cleaned and tested; 2x dryer; heat conduction plate; Stack increase. Block gluing machine Müro 4x5000/A4 WT; cleaned and checked; 2x dryer; pile elevation; heating sheet.

Conveyor screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, screw dryer, drying system, belt dryer for digestate, grain, wood chips, sewage sludge -Screw was designed for a heating plant to discharge the ashes and was not yet in use -Screw tube and screw are double-walled and can therefore be cooled or heated -Execution: stable -Inlet: 1380 x 340 mm -Spout and control flange: Ø 360 mm -Screw and body made of: 30W02/3 -without motor -Screw diameter: 300 mm -Diameter screw tube: 220 mm -Length of screw: approx. 7600 mm -Infeed pitch screw: 55 mm -Outlet slope auger: 215 mm -Dimensions: 9050/610/H1100 -Weight: 2600 kg

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter drier, receiver dryer, filter drier -Manufacturer: KMP, Filter Drier -Type: MB 20 B6 5/8 FLF -Dimensions: Ø 42 x 210 mm -Weight: 0.4 kg

Refrigeration Compressor, Chiller, Refrigeration Compressor, Refrigeration Unit, Refrigeration Compressor, Compressor, Filter Dryer Housing, Filter Dryer, Compressor Protector -Manufacturer: Alco, Compressor Protector, unused original packaging -Type: ASD 35S5-VV -Pressure: up to 500 PSIG / 31 bar -Dimensions: Ø 93 x 180 mm -Weight: 1 kg

feed pressure: 10,0 bar Effective free air delivery: 1.680 L/min motor: 400 V 0: 500 Liter weight of the machine ca.: 348 kg. total power requirement: 15,0 kW range L-W-H: 1240 x 650 x 950 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 7.476 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufactured: Atelier Francois Type: CE 68B Capacity: up to 2600 m3/h Electric motor: 450 KW Electrical connection: 3 x 400 V / 50Hz Complete with: •Electrical cabinet with Star/Delta start with microprocessor L1 •Dryer type Hankinson •Radiator cooling system •Electrical connection between control cabinet, motor, dryer

VARIDAMP alcolor dampening CX equipment (additional equipment for cardboard until 1.2 mm) Ultrasonic double sheet control IR Dryer (Delivery) UV Dryer (Delivery) Logistics System Automatic format setting Automatic plate change Automatic washing device Chromed cylinders ALV 2 Double extension delivery Blower ionization on feeder CIPLink Ink profile presetting via CIP3 data ErgoTronic console with ColorTronic "19" TouchScreen Raise 630 mm complete ( feeder ,delivery and gallery) Grafix Hitronic S powder sprayer It's very well maintenance by KBA It's very good condition Available immediately

PPL Rolandmatic RCI 2 Densitometer only for read - not connected ith RCI Grafix powder spray Steel plate feeder and delivery Technotrans chiller unit overhauled in 2015 Ink temperature control IR dryer All ink fountains overhauled in 2016 Eltosch IR Dryer with 6 lamps Tresu coater Extended delivery APL Eltex antistatic Ionizer at the feeder Safety guards Clean system with water in suburbs of Anilox cylinder Very good condition Can be seen in production

Qty. 1 Second-hand paper coating machine Mfc.: SBL Model: HCUV-350 automatic coating machine Built: 2003 Max. sheet size: 1060 x 740 mm. Min sheet size: 450 x 360 mm. Max. coating area: 1050 x 730 mm Spot coating Speed: 7200 sh/h Automatic feeder with vacuum IR dryer for better varnish heating UV dryer with 3 lamps and cooling system delivery stacker

Used complete line for fruit vegetable processing up to 2 5 tons ph The Complete line used for processing fruit and vegetables up to 2 5 tons per hour represents a significant innovation in the agri food sector With a 2017 18 production year this line has been designed to maximize efficiency and quality of the finished product Reception of fruits and vegetables Barboter The process begins with the receipt of fruits and vegetables using the Barboter system from the manufacturer PIGO This component has a capacity of 2 5 3 tons per hour It is crucial to ensure that incoming products are adequately prepared for subsequent stages Inspector Next the fruit and vegetables under go thorough inspection This phase is managed by a system from the manufacturer PIGO The equipment has a width of 80 cm and a length of 5 m allowing detailed control of the products Cutter The cutting phase carried out by  ...

General SKU303P611 LocationBarneveld MakeCPM Wolverine Proctor (UK) TypeVariable circulation lab dryer No.L 09091 Year of construction2009 Main Features MaterialStainless steel Volume900 Ltr. Max.temp.250 °C Specified Features - Drying oven Drying ovenvariable circulation laboratory dryer Max. temperature250 degr.C Number of compartments:1 Capacity900 Ltr Internal width800mm Internal depth1030mm Internal height1100mm Steam heatingcheck Number of doors:2 With air circulationcheck With fan(2x) Motorcirculation fan 2,0 KW, Motor exhaust fan 3,0 KW With air humidificationcheck With trays(4x) 762x508x102 28% perforated MaterialStainless steel Information With switchgearcheck Weight2000 KG CEcheck Floorspace2,8x2,2 M Extra Specificationsheat exchanger : Heap Dawson Limited, Serial 6744, PS 10 bar, max 250 degr.C. Drying ovensCPM Wolverine ProctorDryers > Dryi ...

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: compressed air supply system, Operating hours: 2169, Flow: 1 cbm/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE

Infrared drying system Schiele IR dryer (HIR stationary dryer) Including approx. 20 tray trolleys for quick Drying of workpieces on trolleys with infrared heaters and fans., Hordes: approx. 20 pieces, length: 7.000 mm, width: 2.500 mm

We offer Compressed air tank Flamco STAG 3000 l 16bar 60°C from compressed air system Picture 1-3 The system is part of a compressed air system in a production hall. It is used, built in 1995/2016, and fully functional, in very good condition and is offered by our customer due to restructuring of the hall use. The display will be updated even further specifications: - Manufacturer: Flamco STAG Behälterbau Genthin - Model: 3000l - Year of construction: 1995 - No.: 59457 - TüV.: still available -Ab. Operating pressure : 16 bar -Ab. Cleaning temperature: 50°C - Type marking : CU 295/6 - Dimensions: D 1200 x H 3000 mm estimated - Weight: 704 kg The container is still in our customer's factory in Halle all. The sale is carried out ex works EXW (loading possibility available). The compressed air system also consists of: Screw compressor Kaeser CS 121 Bj.1995 ...

Block glue press Müro 5000/A3 WT; cleaned and tested; Floor-standing unit; 2x dryer; Insertion width 525mm; Max. Insertion height 525mm. Block guing machine Müro 5000/A3 WT; cleaned and checked; floor mounted machine; 2x dryer; max.width 525mm; max.height 525mm.

Tyre retreading plant Complete production plant retreading plant for cold-retreaded truck tyres Output: up to 200 pcs/day Equipment: Pos.1 Rail System "Helm 500" Frame/Supports Manufacturer TRM Rail length approx. 110m, rail height approx. 2m 76 hooks with rollers 3 processing stations incl. extraction connections Spray tunnel for rubber solution incl. extraction Year of construction: 2008 Pos. 2. Roughening machine Matteuzzi RAS 90 DC 4 defect (drive shaft defective) Manufacturer: Matteuzzi Type: RAS 90 DC4 Machine number: 522 Year of construction: 2004 Pos. 3. Roughener Matteuzzi RAS 98 E ULTRA (as good as new) / Training device from training center Manufacturer: Matteuzzi Type: RAS 98 E Ultra Machine number: 522 Year of construction: 2013 Pos. 4 Roughening machine Bandag EHRD 23 X Machine number: 1031 Year of construction: 1993 Pos. ...

Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Output capacity 65 kg/h CE certified? (YES/NO) Yes Machine manuals (YES/NO) Yes Other details: 2 PCS Processed material Granular concentrate input humidity 0,4% Output humidity 0,02% Dryer KS200 E max. 70 kg/hod.DN500 200dm3, Stirrer L700 Dryer KS150 E max. 55 kg/hod DN500 150dm3, Stirrer L600 Screw TE 63 E diameter 63 mm x 24D Gear pump Feipruef 20 CCM

Description: with new compressor incl. 2 years manufacture warranty Delivery rate of 250 l/min Operating hours 3.221 b/h Scroll Star version for Heidelberg presses with refrigeration dryer and 2x 16 liter tanks Special connection plug for printing machines can be changed without problems to a connection cable with 16 A plug. The following work was done: Defective compressor element was replaced On the refrigeration dryer, the fan motor and pressure switch were replaced. main motor: 4 kW, serial number: AII 861609, screw or piston: 10 bar, Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,150 mm, weight approx.: 210 kg

Description: Screw compressor with FriulAir air dryer Brand: HYDROVANE Year built: 2015 Motor: 7.5 kW Speed: 1,465 rpm Max. pressure: 11 Bar Air dryer: Brand: FriulAir Year of construction: 2015 Type: ACT12/AC Volume: Nom. 1,200 l/Min. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,400 mm, weight approx.: 100 kg

Description: Top-maintained VENJAKOB Venspray adhesive spraying line with thread transport, spray system, nozzle dryer and airless pumps. Only samples, tests and product developments were processed on the system. , VENJAKOB Venspray with thread conveyor belt Machine no. A1411001-0020 Working width approx. 1600 mm Feed approx. 2,5 - 10 m/min Airless nozzles VENJAKOB jet dryer Machine no. A1411001-0030 Siemens Simatic HMI Touch Panel Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Overview This complete can filling line for CSD & Beer was manufactured 2012 by French company Sidel. The line is still set up but no longer in use. Techn. Details Capacity: 27,000 cans per hour Beverages: Carbonated soft drinks, Beer Can type/Lid: 330 ml with 202 super end double seam Components Sidel Sweep off A/Z empty can depalletizer Magnoni vacuum transfer Magnoni gravity rinser Sidel Starcan MS 50V filler Ferrum F 706G seamer Sidel Starblend D3 EX 0433 EX460 mixer Sidel ML 2.4.ST1 CIP tank (4000L) Sidel CWD35/144 pasteurizer Magnoni can dryer (after seamer) Magnoni can dryer (after coder) Sidel TSP3 SDI BW tray & shrink packer Manual palletising Rotoplat semi-automatic pallet wrapper Conveyors

Description: Operating hours: 7549 h MTA MPiTech air dryer Dryer size: 400x500x600 mm MTA filter Air buffer tank 900 L Tank dimension: Ø750x2100 mm flow rate: 2,6 m3/min, suction capacity: 18 kW, operating pressure: 10 bar, Approx. Onsite Dimension. (l x w x h): 950 x 750 x 1,150 mm, weight approx.: 250 kg

Coating unit with chambered doctor blade system (Tresu) UV delivery dryer (IST (2 Lamps)) UV interdeck dryer (x1) Impression-cylinder washing device - automatic Blanket washing device - automatic (Bürste) Extended delivery (X2) Powder sprayer (PowderStar AP 232) Double sheet detection - electronic Preset Plus feeder Preset Plus delivery (X2 (160cm)) WashStar (central washup solution disposal) Prinect Inpress Control Water cooled peripherals StaticStar - Antistatic device with foil package (Advanced) CombiStar - Dampening solution conditioning + ink unit temperature control Preparation for retrofit with interdeck dryers (1-4) Press Center Wallscreen Application Autoplate Pro

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

R26097/16 EDELMANN Continuous Printing Machine Model: COLOR PRINT V72 SL Built: 2008 Paper web width: max. 720 mm Printing width: max. 710 mm Availability: approx. 12/2011 Servo drive Microprocessor control R/R, R/B Flattening: roll diameter max. 127 cm BST web edge and center control Track length control 2 offset printing towers Automatic inking unit washing Railway turning device Hole punching unit Cross cutters UV dryer Plough folding system Available: by arrangement