34 offers matec

Category: 503 shredders
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 131767738
used
Seller: country-de MATEC system+technik GmbH
Price: VB 39.900 €

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 1900 general inventory
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 155194368
New in: 1995
used
Seller: country-de MATEC system+technik GmbH
Price: VB 450 €

Booth MATEC made of solid wood fir with fabric covering can be dismantled for transport "Tower" center L x W x H 2.2 x 1.9 x 3.3 m with fabric covering 4 wings with fabric covering L x H: 2.0 x 2.0 m 4 pcs brochure shelves solid wood 4 p. base made of sheet steel can also be set up in individual parts "Tower" must always be used as the main element Plug-in system with lamello made of aluminium and screws Year of construction 1995 In good condition, ready for use Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136151034
New in: 2018
used
Seller: country-de MATEC system+technik GmbH
Price: VB 2.960 €

Cellar wheel lock With cutting knives Length about 400 mm Drive about 0.37 kW transmission engine Weight about 120 kg Built in 2018, new The machine is in good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 101 boring mills and machining centers
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160279776
New in: 2008
used
TOP Seller: country-de Surplex GmbH
Location: Polen, 42-600 Tarnowskie Góry
Price: used machinery auction RESALE 24.900 €

Description: control: BOSCH ,Rexroth travers: X-axis: ,3000 mm Y-axis: ,600 mm Z-axis (horizontal): ,800 mm Z-axis (vertical): ,700 mm rapid traverse: X-axis: 48 m/min. Y-axis: 48 m/min. Z-axis: 48 m/min 1-axis NC swivel head swivelling: ,+/- 105 degrees direct measuring system: ,+/- 3 arcseconds max. tangent torque: 4200 Nm clamped max spindle motor speed: ,8000 rpm spindle torque 216 Nm (40% DC), 153 Nm (100% DC) tool places: 128 tool holder: ,HSK 63A 1 NC rotary table with direct drive design for turning and positioning holding plate: Ø 630 mm with T grooves installation position holding plate horizontal center alignment: Ø 60 mm speed max.: 80 rpm ,power: 40% DC 5 kW, 100% DC 2,5 kW torque: 40% DC 600 Nm, 100% DC 270 Nm transport load (depending on the speed): max. 1150 kg holding plate vertical/horizontal h ...

Category: 503 shredders
Latest update: 18.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 5856924
New in: 2015
used
Seller: country-de MATEC system+technik GmbH
Price: VB 115.000 €

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

Category: 209 other wood working machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136151020
New in: 2018
used
Seller: country-de MATEC system+technik GmbH
Price: VB 3.320 €

Magnetic drum MATEC For iron capture Length about 400 mm Drive about 0.37 kW Gearbox engine with tin slide Weight about 150 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 103 milling machines / CNC Portal Milling Machines
Latest update: 06.12.2021 add to watchlist
ankerimg
item-No.: 157204687
New in: 2016
used
Seller: country-es AMPERATO MACHINERY AND EQUIPEMENT INTERNATIONAL TRADE S.L.
Location: GUIPUZCOA

MATEC 30P X, Y, Z travels 4000 x 2100 x 1200 mm Number of tools 70 Cone SK40 Adjustable head +/- 105º Spindle rotation speed 9000 rpm Spindle motor power 30 kW BOSCH control Step between studs 2400 INCLUDES Chip extractor 2 Internal cooling Yes Coolant tank with paper filter --------------------------------------- ----------------------------------------- MATEC 30P X, Y, Z recorridos 4000 x 2100 x 1200 mm Número de herramientas 70 Cono SK40 Cabezal ajustable +/- 105º Velocidad de rotación del husillo 9000 rpm Potencia del motor del husillo 30 kW Control BOSCH Paso entre espárragos 2400 INCLUYE Extractor de virutas 2 Refrigeración interna Sí Depósito de refrigerante con filtro de papel

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 27.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158896945
New in: 2007
used
Seller: country-nl Mamach Machinehandel BV
Location: 4761 Zevenbergen

Matec 50 HV/NC 5-Axis (Traveling Column) CNC Vertical Machining Center Table size 1150 x 510 mm. NC rotary table (integrated) 1000 mm Travel X-axis 4000 mm. Travel Y-axis 1000 mm. Travel Z-axis 1300 mm. Number of tool places 48 pieces. Maximum speed of the working spindle 8,000 rpm. Tool holder HSK 100 A CNC control Heidenhain i TNC 530 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Category: 504 sieving machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 5856968
used
Seller: country-de MATEC system+technik GmbH
Price: VB 4.990 €

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Category: 1402 other machines for mechanical handling
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 185411
used
Seller: country-de MATEC system+technik GmbH
Price: VB 2.200 €

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Category: 904 garden and communal machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 72506929
used
Seller: country-de MATEC system+technik GmbH
Price: VB 2.580 €

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

Category: 504 sieving machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136150999
New in: 2018
used
Seller: country-de MATEC system+technik GmbH
Price: VB 9.900 €

MATEC vibror pin special Propulsion new, electric motor 4 kW Linder nominal width inside 1690 mm Linen nominal length 5000 mm Linder trogdepth 260 mm Weight about 980 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 1409 pumps
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 138012949
used
Seller: country-de MATEC system+technik GmbH
Price: VB 9.900 €

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Category: 103 milling machines / CNC Milling Centers
Latest update: 12.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158438954
New in: 2022
used
TOP Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern

Overview BRAND: MATEC YEAR: 2000 MODEL: 30 L APPLICATION TYPE: MILLING LOCATION: AUSTRIA MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELLY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3160 MM MEASUREMENTS DEPTH: 3300 MM MEASUREMENTS HEIGHT: 2720 MM MACHINE WEIGHT: 9000 KG MAIN DRIVE NUMBER OF SPINDLES: 1 NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 700 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 500 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - EXTERNAL SUPPLY OF COMPRESSED AIR 6 BAR

Category: 706 beverage machines / Packer
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158959126
New in: 2004
used
Seller: country-de Füllmeister GmbH & Co.KG

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

Category: 1405 cranes
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157046568
New in: 2015
used
Seller: country-ch MATEC system+technik GmbH
Price: VB 1.500 €

Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Category: 904 garden and communal machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 177954
New in: 2009
used
Seller: country-de MATEC system+technik GmbH
Price: 2.700 €

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

Category: 1402 other machines for mechanical handling
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136150983
New in: 2018
used
Seller: country-de MATEC system+technik GmbH
Price: VB 4.880 €

Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 503 shredders
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 58872102
used
Seller: country-de MATEC system+technik GmbH
Price: VB 10.880 €

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Category: 503 shredders
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 58867192
New in: 2017
used
Seller: country-de MATEC system+technik GmbH
Price: VB 13.300 €

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 11.11.2022 add to watchlist
ankerimg
item-No.: 160209143
New in: 2000
used
Seller: country-de CS-Maschinen
Location: 66701 Beckingen

Vertical CNC machining center Manufacturer Matec Type HV 30 Year of construction 2000 Control Heidenhain TNC 426 Schwenkopf ( B-axis ) 3° degrees shepherd toothing Travel X/Y/Z 3000/600/800mm SK40 24-fold tool changer Speed range 20 - 15,000 rpm is throttled to 12,000 rpm Machine has milled 100% plastic coolant tank has never seen emulsion. It is in very good condition.

Category: 504 sieving machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136151006
New in: 2018
used
Seller: country-de MATEC system+technik GmbH
Price: VB 5.980 €

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 504 sieving machines
Latest update: 31.05.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 131732140
used
Seller: country-de MATEC system+technik GmbH
Price: VB 25.900 €

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 709 other food machines
Latest update: 22.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160291248
New in: 2022
used
Seller: country-ch MATEC system + technik GmbH
Location: 4900 Langenthal
Price: 2.900 €

Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Category: 709 other food machines
Latest update: 22.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160291247
New in: 2022
used
Seller: country-ch MATEC system + technik GmbH
Location: 4900 Langenthal
Price: 3.500 €

Volcanoring MATEC V.1.0 The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached ...

Category: 709 other food machines
Latest update: 22.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160291249
New in: 2022
used
Seller: country-ch MATEC system + technik GmbH
Location: 4900 Langenthal
Price: 6.600 €

Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Category: 503 shredders / Woodchoppers
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 66208023
used
Seller: country-de MATEC system+technik GmbH
Price: VB 3.660 €

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 08.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158181357
New in: 2004
used
Seller: country-de Goldhammer Maschinen- und Lasermesstechnik GmbH
Location: 63856 Bessenbach

X = 6000 mm Y = with 800 mm travel Z = with 700 mm travel Range: 20-12000 rpm Higher motor power max. 30 kW Torque max. 190 Nm Drilling capacity in steel approx. 60 mm Milling capacity approx. 500 cm³ Thread cutting M30 Drive power 30 kW Tool holder SK 40 Control Heidenhain iTNC 530 Hard disk with approx. 3.0 GB for free use Rinsing gun Oil central lubrication Work room lighting 4-fold Conveyor Electronic handwheel (portable) Tool magazine with 60 seats Internal coolant supply 40 bar High pressure coolant on the outer nozzles. Coolant high-pressure pump switchable via M function in the parts program to the external nozzle on the headstock Bellows with steel slats Partition wall for double-user system Work area full encapsulation with roof Completely enclosed workspace The loading doors are designed in such a way that a load with  ...

Category: 101 boring mills and machining centers / Universal processing centres
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156885029
New in: 2006
used
Seller: country-ch Marcels Maschinen AG Schweiz
Location: Schweiz

x-travel: 1300 mm y-travel: 600 mm z-travel: 800 mm table-size: 1515x635 mm round table: 630 spindle taper: HSK63 spindle turning speed range: 15000 U/min tool change unit: 36x weight of the machine ca.: 8.5 t HEIDENHAIN iTNC530 Swivel axis milling head +/- 105° Integrated NC rotary table D-630mm 3D tracer RENISHAW www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Processing Centers
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159663993
New in: 2004
used
Seller: country-nl

x-travel: 2000 mm y-travel: 600 mm z-travel: 600 mm control: Heidenhain b-axis: +-105 ° total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online