75 offers esab

Category: 108 welding machines / Welding Equipment
Latest update: 11.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 144892735
used
Seller: country-de sgr-products e.K.
Price: 1.500 €

- 5 units for sale - Current range (A) 20-400 A. - Open circuit voltage 56 VAC - Power Factor at Maximum Current 0.9

Category: 108 welding machines
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159350873
used
Seller: country-de Peter Jüttermann Werkzeugmaschinen
Location: D - Nordrhein-Westfalen

4 ESAB machine burner type CoolJet BIB 220 A Burner type: Injector Gas type: Acetylene Torch shaft length: 220 mm Torch diameter: 32 mm

Category: 109 other metal working machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158219076
used
Seller: country-nl Mach4metal

Adjusting height maximum: 6000 mm Boom arm reach: 3000 mm SPECIFICATIONS Welding tower / boom height   6000 mm Arm length  3000 mm Number / Power source in AMP  1000 AMP

Category: 108 welding machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218341
used
Seller: country-nl Mach4metal

Amperage range maximum: 0 A Amperage range minimum: 0 A aligning for sections of a growing line ideal for wind tower, vessel, pipemills with rail bogie driven Load capacity per section:30 + 30 T Vessel range Minimum:    1500Ø Vessel range Maximum:    6500Ø No of wheels per section:4 Number of matching pieces:2 Length:                  4.500 mm  Width:                   2.200 mm  Height:                  1.000 mm  Weight:                  2885 + 3885 kg 

Category: 109 other metal working machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218612
used
Seller: country-nl Mach4metal

Workpiece weight: 0 kg Number controlled axis: 0   Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 2   MACH-id      5355 MAKE          ESAB TYPE            GANTRAC 14000 YOP               2013 DIMENSIONS Length        16.000 mm Width            2.000 mm Height            2.000 mm

Category: 109 other metal working machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218495
used
Seller: country-nl Mach4metal

Workpiece weight: 0 kg Table diameter: 0 mm MACH - ID 6224 Type: SEAMER SM2-2000 YOP: 1990 Rated power 60 %500 Amp Rater power 100 %400 Amp Clamping width 1600 mm Minimum product ca 180 mm Maximum product ca 960 mm ESAB Feeder A6 ESAB A10 – MED 44 ESAB LAH 500 Power supply Length3.000 mm Width1.600 mm Height2.200 mm

Category: 109 other metal working machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218969
used
Seller: country-nl Mach4metal

Workpiece weight: 0 kg Workpiece diameter maximum: 0 mm Workpiece diameter minimum: 0 mm Number of rolls: 0   MACH-id   3597 MAKE  Esab Pema Finland TYPE  60 TS YEAR   1997

Category: 108 welding machines
Latest update: 31.05.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159066459
used
Seller: country-dk DenTool LTD
Location: 0 Naestved

Bearing number: 3700 TIG WELDER Manufacturer: ESAB, Type: DTA 200 AC-DC Machines NO.: 865-106 Specifications: Gr. capacity 200 Amp AC/DC Water cooling. Accessories:

Category: 108 welding machines / MIG MAG Gas Shielded Welding Equipment
Latest update: 24.05.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159014353
used
Seller: country-dk DenTool LTD
Location: 0 Naestved

Bearing number: 3701 MIG WELDER Manufacturer: ESAB, Type: LAW 500W Machine NO.: 434-444-0132, Year of construction: 0 Specifications: Gr. power at 100% 500 A

Category: 109 other metal working machines / Plasma Cutting Equipment
Latest update: 14.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159173925
New in: 2003
used
TOP Seller: country-si GINDUMAC GmbH

BRAND: ESAB YEAR: 2003 MODEL: CXC-P3500 PRODUCTION HOURS: APPLICATION TYPE: PLASMA CUTTING LOCATION: SLOVENIA MACHINE TYPE: PLASMA CUTTING MACHINE AVAILABILITY: IMMEDIATELY GINDUMAC ID: SI-PLA-ESA-2003-00001 Technical Information TABLE OUTER LENGTH: 8000 MM OUTER WIDTH: 2650 MM ADDITIONAL EQUIPMENT - ALL THE PIPES Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 3X COOLJET CUTTER WITH A SET OF NEW NOZZLES. - VISION PC CONTROLLER WITH AUTOMATIC SETTING OF CUTTING PARAMETERS (PROPANE, AUTOGENOUS). - DIFFERENT CUTTING THICKNESSES ARE STORED IN THE COMPUTER WITH DIFFERENT SETTINGS, THEN THE MACHINE ITSELF REGULATES THE FLOW OF GASES THROUGH THE VALVES (NO MANUAL VALVES). - CUTTING THICKNESS UP TO 300MM. All info: https://bit.ly/3mzU95j

Category: 107 sheet metal working / Plasma Cutting Machines
Latest update: 25.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159007330
New in: 2014
used
TOP Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern

BRAND: ESAB YEAR: 2014 MODEL: Combirex DX 3000 PRODUCTION HOURS: 7200 APPLICATION TYPE: PLASMA CUTTING LOCATION: ESTONIA MACHINE TYPE: PLASMA CUTTING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: ESAB Technical Information CONTROL UNIT BRAND: ESAB MOVEMENT X-AXIS MOVEMENT: 2500 MM Y-AXIS MOVEMENT: 12000 MM MEDIA MAIN ELECTRONIC CONNECTION: 230 V POWER CONSUMPTION: 3,5 KVA

Category: 108 welding machines / Plasma Cutting Systems
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794798
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 109 other metal working machines / Thermal Cutting Machines
Latest update: 29.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151387578
New in: 2009
used
Seller: country-de METEC GmbH
Location: Baden Württemberg

CNC Portal Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P1 4000 Built: 2009 CNC Control: Vision55 2 autogenous burners 1 plasma burner with power source Kjellberg HiFocus 160i Track width: 4,000 mm Working width: 2,500 mm Track length 18 m (shortenable) without table without filter

Category: 109 other metal working machines / Thermal Cutting Machines
Latest update: 30.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159709806
New in: 2002
used
Seller: country-de METEC GmbH
Location: Deutschland

CNC Portal Flame Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P2 4000 Year of construction: 2002 CNC control: NC 620 (on the left side of the machine) 4 Oxy-fuel burner type knife MS 832 Cutting range up to 300 mm Higher transverse portal, mainly for cutting thicker sheets ( > 100mm ) Track length: 20,000 mm Working range: 16,000 mm Track gauge: 4,000 mm Driven on both sides Capacitive scanning Proportional valves for the cutting gases controlled via database Fully addressed burner trolleys without support table and HEB carrier Documentation + installation plans available Available from 10/2022

Category: 109 other metal working machines / Thermal Cutting Machines
Latest update: 30.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159709805
New in: 2002
used
Seller: country-de METEC GmbH
Location: Deutschland

CNC Portal Flame Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P2 4000 Year of construction: 2002 CNC control: NC 620 (on the right side of the machine) 6 Oxy-fuel burner type knife MS 832 Cutting range up to 300 mm Track length: 20,000 mm Working range: 16,000 mm Track width: 4,000 mm Capacitive scanning Proportional valves for cutting gases controlled via database Fully addressed burner trolleys Driven on both sides without support table and HEB carrier Documentation + installation plans available Available from 10/2022

Category: 109 other metal working machines / Thermal Cutting Machines
Latest update: 30.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159709807
New in: 2002
used
Seller: country-de METEC GmbH
Location: Deutschland

CNC Portal Flame Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P3 7500 Year of construction: 2002 CNC control: NC 620 (on the left side of the machine) 12 Oxy-fuel burner type knife MS 832 Cutting range up to 300 mm Track length: 64,000 mm Working range: 36.1 m Track width: 7,500 mm Driven on both sides Capacitive scanning Proportional valves for the cutting gases controlled via database Fully addressed burner trolleys Air shower for cooling the cutting bridge without support table and HEB carrier Documentation + installation plans available Available from 01/2023

Category: 109 other metal working machines / Thermal Cutting Machines
Latest update: 30.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159709808
New in: 2002
used
Seller: country-de METEC GmbH
Location: 7262 Deutschland

CNC Portal Flame Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P3 7500 Year of construction: 2002 CNC control: NC 620 (on the right side of the machine) 10 Oxy-fuel burner type knife MS 832 Cutting range up to 300 mm Track length: 64,000 mm Working range: 36.1 m Track width: 7,500 mm Driven on both sides Capacitive scanning Proportional valves for the cutting gases controlled via database Fully addressed burner trolleys Air shower for cooling the cutting bridge without support table and HEB carrier Documentation + installation plans available Available from 01/2023

Category: 109 other metal working machines / Thermal Cutting Machines
Latest update: 30.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159709809
New in: 2007
used
Seller: country-de METEC GmbH
Location: Deutschland

CNC Portal Flame Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P3 7500 Year of construction: 2007 CNC control: Vision NC55 8 Oxy-fuel burner type knife MS 832 Cutting range up to 300 mm Track length: 64,000 mm Working range: 32,000 mm Track width: 7,500 mm Driven on both sides Capacitive scanning Proportional valves for the cutting gases controlled via database Fully addressed burner trolleys Air shower for cooling the cutting bridge without support table and HEB carrier Documentation + installation plans available Available from 01/2023

Category: 109 other metal working machines / Thermal Cutting Machines
Latest update: 30.08.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159709810
New in: 2007
used
Seller: country-de METEC GmbH
Location: Deutschland

CNC Portal Flame Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P3 7500 Year of construction: 2007 CNC control: Vision NC55 8 Oxy-fuel burner type knife MS 832 Cutting range up to 300 mm Track length: 64,000 mm Working range: 32,000 mm Track width: 7,500 mm Driven on both sides Capacitive scanning Proportional valves for the cutting gases controlled via database Fully addressed burner trolleys Air shower for cooling the cutting bridge without support table and HEB carrier Documentation + installation plans available Available from 01/2023

Category: 108 welding machines / Laser Cutting Machines
Latest update: 14.07.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 142894295
New in: 1998
used
Seller: country-de METEC GmbH

CNC Portal Laser Cutting Machine Manufacturer: ESAB Type: Alpharex AXC 7000 Built: 1998 CNC control: NCE620 Working range: 5,000 mm x 27,000 mm Laser type: TLF 4000 t Suction table: Beuting without suction

Category: 108 welding machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156894044
used
Seller: country-de WeMa A. Pigge GmbH
Location: Goldenstedt

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 108 welding machines
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160318164
used
TOP Seller: country-de Surplex GmbH
Location: Deutschland, 39112 Magdeburg
Price: used machinery auction RESALE 450 €

Description: 800 A max. weight approx.: 150 kg, dimensions (l x w x h) approx.: 1,400 x 1,300 x 1,700 mm

Category: 108 welding machines
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160277778
used
TOP Seller: country-de Surplex GmbH
Location: Deutschland, 71384 Weinstadt
Price: used machinery auction RESALE 70 €

Description: Serial number 005-111-0843 For all other welding technical data, see photographed nameplate . weight approx.: 100 kg, dimensions (l x w x h) approx.: 700 x 450 x 700 mm

Category: 107 sheet metal working
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160277667
New in: 1991
used
TOP Seller: country-de Surplex GmbH
Location: Schweiz, 2502 Biel/Bienne
Price: used machinery auction RESALE 900 €

Description: Voltage of control 220 V, ,Voltage of plasma torch 500 V, with exhaust system , weight approx.: 1,200 kg, dimensions (l x w x h) approx.: 4,200 x 2,700 x 1,900 mm

Category: 109 other metal working machines
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157170734
New in: 1997
used
Seller: country-de
Price: 480 €

E-welding machine ESAB type LTG 250 rod electrode welding machine mash. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power setting: infinitely variable - Electrode holder with 6 meter connection cable - DIRECT current - Fan- Air cooling - possibly also TIG welding possible, without hose package connection 380 Volt, 50 Hz, 32 Amp. Plug Court requirement L x W x H 1200 x 750 x 1050 mm weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not present and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore only sold as an electrode welder; used

Category: 108 welding machines / Electrode Welding Equipment
Latest update: 10.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159816627
used
Seller: country-de Frank Sprengel Metallbearbeitungsmaschinen
Location: 45138 Essen
VS

Electrode welding Manufacturer ESAB Type LHK350 Power 350 amps at 35% ED, 200 amps at 100% ED Power connection 400 Volt 20 Ampere Weight approx. 150kg Machine ready for demonstration under power. Shipping on Euro pallet possible.

Category: 108 welding machines
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158758167
used
Seller: country-de Peter Jüttermann Werkzeugmaschinen
Location: D - Nordrhein-Westfalen

ESAB LHK 350 welding machine (rectifier)

Category: 108 welding machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 154468163
used
Seller: country-de
Price: 290 €

Feed device for inert gas welding device, inert gas device, welding rectifier -Feeder -Manufacturer: ESAB -Type: A9E-MEE30 -Dimensions: 660/320/H490 mm -Weight: 17 kg

Category: 108 welding machines
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160322287
New in: 1993
used
Seller: country-de Innovac GmbH
Location: Deutschland

Feed rate: 50-6000mm/min, table height: 660-762mm, number of tools: 4, max. workpiece thickness: 150mm, width: 4625mm.

Category: 108 welding machines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157251074
used
Seller: country-de
Price: 330 €

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with sleeve) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online