DOPPSTADT used machine for sale

ID3259 Doppstadt DW2560 BK Bison year/Year of construction 2003 approx. 8130 hours/hours 28 t Wood shredder, screening system new approx. 1200 hours ago, gearbox overhauled and shaft replaced approx. 1200 hours ago Wood shredder, screening plant new approx. 1200 hours ago, gearbox overhauled and shaft renewed approx. 1200 hours ago

ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder

ID3252 Doppstadt SM618 Profi year/Year of construction 2001 approx. 1011 hours acc. Counter/hours according to counter 15 t Drum sieve, with 3 sieves (15/20?/50 mm perforation) Drum sieve, with 3 sieves (15/20?/50 mm perforation)

Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.

Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.

Drum screening machine for sieving compost, humus, sand, wood chippings, waste fractions, shredded goods etc., machine is technically completely overhauled, 1 x screening drum as required new or as good as new included, good ready for use,

Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.

Drum screening machine for sieving compost, humus, wood chips, biomass, sand, garbage, etc., very good condition, service new, incl. 1 sieve drum as required,

Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available

ID3166 Doppstadt SM518 S year/Bauahr 1991 6220 hours (acc. Counter)/Hours (according to counter) Drum sieve, Mercedes-engine, brush new, almost new drum with 15 mm mesh size, Additional hydraulics for e.g. magnetic tape Drum screen, Mercedes engine, brush new, almost new drum with 15 mm mesh size, additional hydraulics for e.g. magnetic tape

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available

Doppstadt DW 3060K Biopower Type F - Year of construction 11/2017 - Hours 4839 - Engine MTU 490 hp - AD BLUE - Track chassis - Weight 30,000 kg -Remote control - Humidification system - Tail conveyor 7m - Overbelt magnet Machine is overhauled and immediately available

USED TROMMEL FOR DOPPSTADT, KOMPTECH, TERRA SELECT AND SEKO IN READY DELIVERY: FOR T4 / T40: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 8 mm THICKNESS (NEW) 25 mm SQUARE HOLE 8 mm THICKNESS (NEW) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 35 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm SQUARE HOLE 8 mm THICKNESS (NEW) FOR SM 518 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (NEW) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (USED & NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (USED) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm CIRCLE HOLE 8 mm THICKNESS (NEW) FOR SM 618 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 20x25 mm RECTANGULA ...

Air nozzle 110 mm with flexible hose 80 mm, total length approx. 890 mm, shaft-mounted holder for 20 mm pipe

The process engineering focus of the Doppstadt screw press is not on extracting as much biogas from the feed material as possible, but rather on providing a clean biogas substrate with a single machine, that requires no further treatment. Working chamber of the press screw diameter/length: 500mm/2000mm. Pressing baskets: round sieve holes with 8mm diameter. Feed hopper: volume: 5m³, feed height: 2900mm. Foldable one-piece rear belt: dimensions X/Y/Z: 5000mm/1200mm/3000mm with smooth belt. Eccentric screw pump for filtrate: max. delivery head/delivery length: 10m/15m. Throughput: 8-12t/h, liquid phase TS: 16%-23%. The machine is in mint condition with only 300 hours of operation. Including feed hopper DM 205, folding one-piece rear belt and eccentric screw pump for filtrate. Documentation available. On-site inspection is possible.