DAMAS Sigma used machines

Damas Sigma 753 Grain cleaner. Total refurbished with new bearings. New brushes Sandblasted and painted. Comes with pulco, aspirator and valve

DAMAS table reader SORLA 54, stepless settings,

DAMAS Trieure 4 pieces, HOTYP 730

Damas Entgranner, racket, dosable, speed adjustable, 15 KW, 1470 rpm

DAMAS GOLFA 1327IE, FINE CLEANING MACHINE Pre-climb classifier module E/R, main climb classifier module E/R, screening unit module E/R, air regulation, spare screens etc.

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

We offer Kaeser compressed air system consisting of 2x adsorption dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter, compressed air management system Sigma, oil-water separation system & control cabinet The compressed air system was used to supply compressed air to a production hall. It was built or extended from 1995-2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the use of the hall. The screw adapter is sold. 1. Screw compressor Kaeser CS 121 75 kW 2, 2x Adsorption Dryer Kaeser DC 75 E Bj. 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Bj 1995 704 kg 4.Piping with ultrafilter SG 0192, 5,Control system: SIGMA Air Manager Basic 6.Oil-water separation system Kaeser 7.Control cabinet standard Rittal PS 4884 Technical data on the components To 1 photo 1-2 Screw compr ...

Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: * 1 fixed 2500x600mm * 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations

The scope of delivery includes: 01x Stage support, new Manufacturer: SSI Schaefer Design: Corner connection / 90° suitable for CS Sigma profiles with a profile height of 300 mm Type of screw connection: internal Material color: sendzimir galvanized Technical data for the stage carrier: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

BRAND: TORNOS YEAR: 2007 MODEL: DELTA SIGMA 20 PRODUCTION HOURS: 16961 APPLICATION TYPE: TURNING LOCATION: TURKEY MACHINE TYPE: SWISS TYPE TURNING AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 31I-MODEL A MAIN DRIVE NUMBER OF SPINDLES: 2 SPINDLE SPEED RANGE: 10000 1/MIN NUMBER OF AXIS: 8

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

autom. boring machine Brand: VITAP Type: SIGMA B1 New machine technical detail: - 2800 mm working table - PLC and touch screen - 2 horizontal boring heads with 21 spindles each prepared for quick chucks - 2 motors each 1,5 kW - the right horizontal boring head is movable with the possibility to pass over the vertical boring groups and fitted on prismatic guide with ball bushes and electronic digital indicator. - Digital position indicators for height regulation of the horizontal boring heads - 2 pneumatic stops - changing horizontal/vertical drilling circuit - Belt conveyors fitted on springs sliding on prismatic guide with ball bushes - Front and side pneumatic pushers - Security on line circuit - 700 mm Infeed conveyor - Horizontal movement of the right head by ball bushes guide with electronic digital indicator - Standard accessories - CE standards Dust ...

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985

Used Sigma P plastic tube filling machine. Technical specifications: - Type: Sigma P, - Manufacturer: IM, ACO Group - Year of manufacture: 2011, - Dose size: 3-250 ml, - Tube length: 50-250 mm, - Tube diameter: 10-50 mm, - Capacity depends on tube size, maximum capacity: 1200-2100 tubes/h, - Air consumption: 200-300 dm3/min, - Power: 3.5 kW, - Weight: 600 kg. Product contact parts are made of AISI 316 stainless steel. Other main components are made of AISI 304 stainless steel. Main machine components 1-Tube drive 2-Insertion + orientation 3-Tube sorter 4-Dosing device (pump) 5-Dosage volume setting 6-Positioner 7-Tube hopper 8-Tube hopper height adjustment 9-Intermediate hopper 10-Ejector 12-Plastic tube holder 13-Metal tube holder 14-Control panel 16-Machine frame 17-Tube heating (for plastic tubes) 18-Tube sealing (for plastic tubes only) 19-Trimmin ...

A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible.

M.Nr. AE/030883 Year of Make: 2007 Motor data: 380 V - 50 Hz - 38 A Type: SEZ. MON. E Cutting dimensions: 3200 mm x 3200 mm Scoring Weight approx.: 2400 kg Equipment: 1 x Front fixed table with guide 1500×600 mm, air cushion 2 x Front fixed table 1500×400 mm, air cushion Automatic switching off of the scoring saw blade Main saw blade motor 7.5 kW (10 hp) Star-delta start-up for main saw blade motor Groove design with manual adjustment of the main saw blade 3D simulator on the machine Graphical editor Cutty – Cut Optimization Software PC Machine feet / pedestals Electrical equipment A.E.V400/50 "N" with microswitch, scoring cut-off, 0YD, grooves

Panel saw SCM mod. SIGMA 65 - CE rules - Cutting dimensions: 4500X3200 mm - Main blade projection: 65mm - N. 6 clamps - Saw carriage speed: 12m/min - Main blade diameter: 300mm - shaft diameter 80mm - Scorer blade diameter: 160mm - shaft diameter 55mm - Main blade motor: 5,5kW - Overall dimensions: 7000x5000x4350 - S/N AE/22614 - Year 2001

This THOME Prazision 3D Sigma was manufactured in 2007. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this THOME Prazision 3D Sigma CMM machine. Contact us for more information.

* General * SKU390X1040 * MakeAPI Schmidt-Bretten * LocationBarneveld * CEcheck * TypeSigmawig ST30 TDL * Pressure * Working pressure25 Bar * Main Features * MaterialStainless steel * Surface7.6 m2 * Size length995 mm * Sizes width450 mm * Specified Features - Plate heat exchanger * MaterialStainless steel 1.4404 (316L) * Plate heat exchangerscheck * Heating surface7.6 * Capacity15,8 + 16,6 l. * Number of platens24 * Plate sizes450 x 995 mm * ConnectionsDN100 * Max. temperature5 / 250 °C * Information * No.PW-00520 * Year of construction2014 * Floorspace0,55x0,65 m * Total height1,20 m * Weight800 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

* General * SKU390X1021 * MakeSchmidt * LocationBarneveld * CEcheck * TypeSigmawig ST 12 VDN * Pressure * Working pressure25 Bar * Main Features * MaterialStainless steel * Surface8.7 m2 * Size length348.5 mm * Sizes width197.5 mm * Specified Features - Plate heat exchanger * MaterialStainless steel 1.4404 (316L) * Plate heat exchangerscheck * Heating surface8,7 m2 * Capacity8,912 l. * Number of platens64 * Plate sizes197,5x348,5 mm * ConnectionsDN50 * Max. temperature20-180°C * Information * No.08V000422 * Year of construction2008 * Floorspace0,213x0,40 m * Total height0,770 m * Weight161 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

* General * SKU390X1007 * MakeSchmidt-Bretten GmbH * LocationBarneveld * CEcheck * TypeST12-PF-03884 * Pressure * Working pressure25 Bar * Main Features * MaterialStainless steel * Surface8.7 m2 * Size length1035 mm * Sizes width335 mm * Specified Features - Plate heat exchanger * MaterialStainless steel 1.4404 (316L) * Plate heat exchangerscheck * Heating surface8.7 m2 * Capacity8,91/8,64 l. * Number of platens64 * ConnectionsDN50 * Max. temperature250°C * Information * No.17V007820 * Year of construction2017 * Mounted on framecheck * Floorspace0,335x0,686 m * Total height1.035 m * Weight332 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

* General * SKU390X1003 * MakeAPI Schmidt-Bretten * LocationBarneveld * CEcheck * TypeSigmawig ST12-PF 1148 * Pressure * Working pressure25 Bar * Main Features * MaterialStainless steel * Surface8.7 m2 * Specified Features - Plate heat exchanger * MaterialStainless steel 1.4404 * Plate heat exchangerscheck * Heating surface8.7 m2 * Capacity8,45 / 8,71 l. * Number of platens64 * ConnectionsDN50 * Max. temperature0°C/+200°C * Information * No.08V000423 * Year of construction2008 * Floorspace0,35x0,35 m * Total height0,70 m * Weight160 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

* General * SKU390X1039 * MakeSchmidt-Bretten GmbH * LocationBarneveld * CEcheck * TypeST12-PF 2654 * Pressure * Working pressure25 Bar * Main Features * MaterialStainless steel * Size length650 mm * Sizes width300 mm * Specified Features - Plate heat exchanger * MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) * Plate heat exchangerscheck * Capacity2,06 / 2,33 Ltr. * Plate sizes300x600 mm * ConnectionsDN50 * Max. temperature5 / 250 °C * Information * No.07V002072 * Year of construction2007 * Floorspace0,36 x 0,25 m * Total height0,80 m * Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. P ...