Manufacturer:
(Category: 605)
Leather splitting machine Camoga Cn 412 with 40cm working width
Leather splitting machine Camoga C 520 L with 50cm working width
Slitter rewinder for artificial leather or textiles Width 160cm
A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible.
Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - / Contact us at -
Manufacturer: Menzel Type of Machine: Washing Line Year of Manufacture: 2013 Technical Data Fabric Type: Warp knit, lace, Raschel goods, tricot Material Composition: - 100% Polyamide - 100% Polyester - Polyamide/Spandex (Elastane up to 30%) Dimensions & Weight: - Material Width: 2,200 – 3,200 mm - Roller Width: 3,400 mm - Fabric Weight: 50 – 265 g/m² Performance: - Production Speed: up to 40 m/min - Process: Spun oil removing, water-based washing Chemicals Used: - Oil-emulsifier - Washing/wetting agent - Alkali - Acetic acid for pH neutralization Steel Grades: - Lateral Frames: AISI 304 (V2A) - Parts in Contact with Media: AISI 316 (V4A) Machine Specs: - Unwinder Diameter: 1400 mm - Winder Diameter: 1800 mm Power & Utilities: - Voltage: 230/400 V, 50 Hz, 3 Phase - Steam Pressure: 4 – 6 bar - Compressed Air (Oil-Free): 6 – 7 bar - Water Pressure: 2 ...
STORK PEGASUS ROTARY SCREEN PRINTER STORK PEGASUS ROTARY SCREEN PRINTER. TYPE 3200/24/20 .Year 2001 20 colours installed on a 24 position print block. Max printing width 3200mm Repeat sizes 640/914mm . Magnet System print paste application. Comprising : High entry with fabric guide rollers E+L KF 2020 edge guiders ,dust extraction unit. Reconditioned and upgraded January, 2024 Fabric passage onto a Curved Plate with Thermoplast , Wet Gluing.Belt Washing. STORK APOLLO Dryer ,Type 3200. 2 compartments ,Gas heated with support conveyor. Ext with fabric take off rollers and plaiter. Find more here - / Contact us at -
Manufacturer: Tonello Model: Laser Blaze 250TN Year of Manufacture: 2011 aprox 1,4x1,4m garments, for denim fabrics Find more here - / Contact us at -
Production lines: 1. Polyester fiber production line (Chinese brand) Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. ...
Manufacturer: Chiossi e Cavazzuti Model: Poker 1200 Year of Manufacture: 2023 Type: Oven for drying water-based and plastisol inks Power: 38 kW Phases: 3P + PE Current: 58 A Voltage: 400 V Frequency: 50/60 Hz Weight: 1400 kg Find more here - / Contact us at -
Four industrial sewing machines are available. 1) Dürkopp. 2) Yamato ZF1020-X4DF-20/BT13. 3) Juki LH-1152-4. 4) Pfaff 439-3.
A drying oven Ernst Reinhardt GmbH, which was used in the twisting and tea bag industry for drying yarn bobbins, is available. Internal dimensions X/Y/Z: 1250mm/800mm/1500mm, volume: 1.5m³, heating capacity: 24kW, machine dimensions X/Y/Z: approx. 2200mm/1100mm/2500mm. On-site inspection is possible.
A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.
There are 6 warping machines and 1 warp knitting machine available. 1) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1170, warping speed: 500m/min. 2) Warping machine Textima DS 42/30, year of construction: 1986, positions: 672, warping speed: 500m/min. 3) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. 4) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1344, warping speed: 500m/min. 5) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 700, warping speed: 500m/min. 6) Textima DS 42/30 warping machine, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. All warping machines were equipped with yarn monitoring devices, lint monitors or camera monitoring (CAM-SCAN and Protecha) and KFD brakes. 7) Warp knitting machine Textima Liba Excentra type 94, ...
A 3-needle hem sewing machine with trimming device (high-speed cylinder bed coverstitch machine with integrated thread trimmer and trimming device) Juki is available. Stitch type: triple coverstitch, needle gauge: 5.6mm, sewing speed: 6000 stitches/min, table top dimensions X/Y: 1060mm/600mm, needle: UY128GAS 9S-14S, stitch length range: 0.9mm/4.5mm, control: SC921B, control panel: CP18B. Documentation available. On-site inspection is possible.
A CadCam CO2 laser cutting machine for the textile, wood, paper and plastics industries is available. Working dimensions X/Y: 2000mm/3000mm, max. axis speed: 1m/s, acceleration: 2G. Including various accessories. Documentation available. On-site inspection is possible.
Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without com ...
A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.
A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible.
Manufacturer: Murata Model: Vortex 861 MVS Year of Manufacture: 2010 Spindle Type: Super FAT Conicity: 5º57 Traverse: 6” Feed Can Size: Diameter = 20” – Height = 1,20 m Doffers: 1 Splicer Nozzle Prism: G2Z No Of Splicer: 2 Clearer Type: MSC Waxing: yes The machines do NOT have the Poly Master. Power Capacity: 32 kW Current: 73 A Voltage: 380 V Frequency: 60 Hz Phase: 3 Find more here - / Contact us at -
Manufacturer: Murata Model: Vortex 861 MVS Year of Manufacture: 2010 Spindle Type: Super FAT Conicity: 5º57 Traverse: 6” Feed Can Size: Diameter = 20” – Height = 1,20 m Doffers: 1 Splicer Nozzle Prism: G2Z No Of Splicer: 2 Clearer Type: MSC Waxing: yes The machines do NOT have the Poly Master. Power Capacity: 32 kW Current: 73 A Voltage: 380 V Frequency: 60 Hz Phase: 3 Find more here - / Contact us at -
Manufacturer: Suzuki Model: K5 Automatic Year of Manufacture: 2001 Type of Machine: Warping Machine Minimum Warping Capacity: 10 meters Maximum Warping Capacity: 1200 meters Creel: ROSTONI, 240 positions Condition: Fully operational and in perfect working condition Find more here - / Contact us at -
Hollanders - ColorEdge 230 Precision cutting system for textile applications The ColorEdge 230 from Hollanders is a professional cutting system specially developed for the precise cutting precise cutting of textile materials. With a working width of 230 cm, This machine is ideal for roll-to-roll applications and guarantees clean, precise cuts, that meet the highest demands. Technical highlights: - Working width: Up to 230 cm. - Cutting technology: High-precision roll-to-roll cutting for even and accurate results. results. - Material compatibility: Suitable for a wide range of textiles (e.g. polyester). - Operation: Simple and efficient processing for maximum productivity. - Construction: Robust, durable design for continuous professional use. - Dimensions & weight approx. 320 x 200 x 130 cm (WxHxD), approx. 800-850 kg Spare parts renewed - PVC transport rollers (11/2023) ...
Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool ...
LattenbreithalterM.M. T.L.Slatted Wideholder Stainless Steel 3600 2352.8611069.670 .6-19Diameter: Ø 153 mmStorage: 120 x 120 mmHole Spacing: 80 x 80 mmNew !Dimensions: 3800 x 170 x 170 mm
