Manufacturer:
(Category: 1403)
Pallet rack 5m high, Nedcon, 1.000kg / pallet, approx. 720 storage spaces - used - : Price: 21.250.- € (net) incl. delivery within Germany (without islands)! Example configuration – other configurations like unverb. on request! Price per frame: 146,50 € (net) Price per truss: 29.-€ Accessories: Price per corner bumper 90 degrees: 55.-€ (net) Price per post collision protection: 14.-€ (net) Manufacturer: Nedcon Type: Pallet Rack Year of manufacture: current new product Shelf load: 3,000kg Max. pallet weight: 1,000kg Max. usable bay load: 9,000kg (other bay loads on request) Frame Quantity: 66 pieces Frame height: 5m (other frame heights up to 7.50m available at short notice) Frame depth: 1.10m Frame bracing: screwed (frames are not delivered pre-assembled) Trusses Quantity: 360 pieces Clear width: 2.70m (also available in 1.80m and 3.60m) Inc ...
100 pieces of lattice supports, 1 to. / Pallet space, for pallet racks 1.20m deep - virgin material - : Price per piece from location: 20.- € (net)! Only complete acceptance! Manufacturer: MantaMESH Type: MantaMESH Year of construction: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent of the rack beams Evenly Distributed Load (UDL) (kg) 1000 Allowable Deflection (mm) 7.3 Load given Structural Failure (kg) 2000 Properties ANSI MH 26.2 - 2017 compliant Made in Germany Pre-galvanized, hemmed beams SafeEDGE® on grilles and beams Grid has over 70% open area EU Design Registration No. 002435099-0003 Specifications Beam Type: Box 50, Box 50 Shelf depth (mm) 1200 Grid depth (mm) 1202 Grid width (mm) 879 Distance to top wire (mm) 25 Distance to subwire (mm) 100 Top wire ...
approx. 816 St. Stacking yokes for long goods, J. Muszinski, 3 to load capacity, heights 400 / 500 / 600mm – used- : Price per piece ex site, (net) incl. loading! Up to 40 pieces: 109.-€ up to 99 pieces: 105.-€ up to 250 pieces: 99.-€ For complete inspection: 89.-€ Minimum order: 16 pieces Manufacturer: J. Muszinski, welding company Type: HF Stacking Yoke Year of Make: 2011 Load capacity: 3,000kg Net weight: approx. 87 – 99kg Width: 1070 mm Ab. Load at internal height: H = 400mm to 27,700kg H = 500mm to 22,000kg H = 600mm to 18,500kg Blend: 40 cm 227 pcs. 50 cm 441 pcs. 60 cm 148 pcs. Available: immediately Condition: good Location: 47059 Duisburg
189 pieces of lattice supports, 1 to. / Pallet space, for pallet racks 1.05m deep - new material - : Price per piece from location: 20.- € (net)! Only complete acceptance! Manufacturer: MantaMESH Type: MantaMESH Year of construction: 2024 Condition: very good Available: immediately Location: Paderborn ANSI MH 26.2 - 2017 compliant Performance independent of the rack beams Evenly Distributed Load (UDL) (kg) 1000 Allowable Deflection (mm) 6.4 Load given Structural Failure (kg) 2000 Properties ANSI MH 26.2 - 2017 compliant Made in Germany Pre-galvanized, hemmed beams SafeEDGE® on grilles and beams Grid has over 70% open area EU Design Registration No. 002435099-0003 Specifications Beam Type: Box 50, Box 50 Shelf depth (mm) 1050 Grid depth (mm) 1052 Grid width (mm) 879 Distance to top wire (mm) 25 Distance to subwire (mm) 100 Top wire Ø (mm) 4 ...
T14 - used approx. 22 m³ / 22,000 L steel tank, repainted inside and out, with heating coil, lying on steel bases. Technical details: Content: approx. 22 m³ / 22,000 litres Material: Steel tank with inner coating Dimensions: approx. Ø 2.30 m × L 5.30 m / H total 2.70 m Other: Used steel tank, repainted inside and out, with heating coil. In good condition. Horizontal, above-ground storage tank on 2 steel bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., or e.g. as a firefighting water tank. Price on request. Transport can be organised at a reasonable price. It is ...
approx. 117 pieces Stacking racks, stanchion racks, 2 types – used- : Price (net), ex location – only complete acceptance per type! Type 1: 125.-€ Type 2: 125.-€ Manufacturer: unknown Year of manufacture: unknown Type 1 – 75 pieces - Stacking racks with wooden floor, Green Dimensions: W=1940 mm / W=1200 mm Type 2 – 42 pieces - Stacking racks with wooden floor Grey W=2400 mm / W=1200 mm Condition: good Available: immediately Location: 77933 Lahr
Two balers, Bramidan X30 – used - : Price (for both together) from location: 17.500.-€ (net) Please note that one of the two presses has to be repaired – there is a cost estimate of approx. 1,500 € (net)! Manufacturer: Bramidan Type: X30 AD Machine number PEY395533 (second number on request) Year of manufacture: 2018 Pressing force: 30 t Bale size: WxDxH (mm) 1200 x 800 x 1000 FILLING OPENING: WxH (mm) 1090 x 655 BALE WEIGHT: Cardboard (kg) 275-350, Plastic film (kg) 325-425 Types of recyclable materials: cardboard, plastic film, paper, PET bottles, aluminium cans, tin cans, hard plastic, textiles, polystyrene. 3 x 230 – 400V, 50Hz, Amp: 25/16 dB: 59-60 Weight: 1.650kg Condition: good – very good Available: immediately Location: 21465 Reinbek
Crown GPC 3060P Order Picker Manufacturer: Crown Type: GPC 3060P The Crown GPC 3060P is a powerful and reliable order picker designed for demanding industrial applications. With a load capacity of 2,700 kg and a robust construction, it is ideal for use in warehouses, logistics centres and other working environments. Equipped with state-of-the-art technology and an ergonomic design, the Crown GPC 3060P offers efficient performance, precise control and supreme comfort for the operator. Nominal load capacity at LSP 2.7 t Weight 1.91 t Year of Make: 2016 Hours: 150/165/170 Since the article is available several times, there are different operating hours. Delivery is random. Scope of delivery: 1 x Crown GPC 3060P order picker + 1 x position device You can find more order pickers - new and used - in our shop! International shipping costs on request!
T15 - used approx. 45 m³ / 45,000 L steel tank, pressure tank, coated inside, lying on steel bases. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Steel tank with inner coating Manufacturer: Tank- u. Stahlbau Abersfelder Dimensions: approx. Ø 2.30 m × L 11.00 m / H total 2.50 m Other: Used steel tank with Poxitar inner coating (2-component polyester resin), professionally cleaned and in good condition. Pressure tank 10 bar. Horizontal storage container on 2 steel bases, several inlets and outlets. Can be used as an above-ground tank or as an underground tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., o ...
The scope of delivery includes: 01x Stacking container, used Material colour: grey Overall width: approx. 1,040 mm Inner width: approx. 930 mm Total depth: approx. 640 mm Interior depth: approx. 590 mm Total height: approx. 550 mm Interior height: approx. 400 mm Foot dimensions: approx. 110 x 110 mm Underride height: approx. 140 mm Volume: 220 liters Weight | Pcs.: approx. 11,50 Kg Currently in stock: 144 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.
Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x Workbench stand, used Material colour: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm Clear width: 2,300 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: - The images are used to illustrate the material. - The material color may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3-5 working days. You are also welcome to purcha ...
Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...
P134 - used approx. 40 m³ / 40,000 L polyester tank, GRP tank, lying on steel bases, good condition. Technical details: Capacity: approx. 40 m³ / 40,000 litres Material: Polyester / GRP Manufacturer: Reich-Tank Dimensions: approx. Ø 3.00 m × L 6.50 m / H incl. base 3.70 m Miscellaneous: Used polyester tank, professionally cleaned and in good condition. Above-ground tank on 2 steel bases, dome and all connections on top of the tank body. Pictures from the inside will follow. Only the pure tank is sold, without attachments such as pipes, fittings and accessories. The tank can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price on request. Transportation can be arranged at a reasonable price. It is not possible to update all our ...
P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, blea ...
Pallet wrapper, stretch machine for pallets, second-hand - : Price ex location: 4.250.-€ (net), incl. loading! Very robust device! Type HAD 1500 Completely overhauled by the manufacturer Equipment of the machine: Electrical control system completely overhauled (frequency converter) Foil brake (magnetic particle brake newly powder-powdered) adjustable Foil carriage restored Photocell for pallet height scanning Manual Functions Turntable remounted Drive-on ramp used Additional design: with wheelchair access (can be moved with forklift) Condition: very good Available: now Location: 91177 Thalmässing
V22 - used approx. 30 m³ / 30,000 litre V4A stainless steel tank, horizontal tank on pedestals. technical details: capacity: approx. 30 m³ / 30,000 litres material: stainless steel, probably V4A, we can have this tested upon request dimensions: approx. L total 6.50 m / L tank 6.00 m × Ø 2.50 m / H total 3.00 m Used stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank on 2 fixed, welded stainless steel bases, lid on the top of the tank (68 cm) and on the side, several inlets and outlets. On the flanges it reads V4A 1.4571, see picture. This stainless steel tank can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, manure, potato steam trays, leachate, rapeseed oil or as a rainwater collection tank, etc.. Pictures from the inside to follow. Unfortunately there is no type label. Price u ...
Offer 24083 Specifications: - Capacity 300 L - Load capacity up to 750 kg - Drive-in pockets for forklifts -Tilt - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg
V23 - used approx. 28.5 m³ / 28,500 ltr stainless steel tank V4A container tank, insulated, heatable and coolable. technical details: capacity: approx. 28.5 m³ / 28,500 litres material: stainless steel V4A dimensions: approx. Ø 2.50 m × L 9.20 m × H 2.60 m without railing Used V4A stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank, container tank, insulated by approx. 20 cm glass wool / rigid foam, heatable or coolable. With foldable railing, 2x lid on top of the roof, several inlets and outlets. The tank is being sold as shown in the pictures. Can be used as storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to updat ...
approx. 7.200 pieces, Euro stacking container in 1.19m x 610 x 420m - used - : Price per piece ex site: only 15.-€ (net)! Price for complete acceptance: only 10.-€ (net)! 1 truckload = 432 pieces! Manufacturer: unknown Year of manufacture: unknown External dimensions (LxWxH): 1,190 x 610 x 420mm Internal dimensions (LxWxH): 1,150 x 555 x 390mm Material: Polypropylene Weight per container: 10.8kg Colour: grey Approx. 432 boxes fit per truck Condition: good Available: from April 2024 Location: Emden, later Frankenberg camp
Used storage box 22.5 x 14.5 x 12 cm gray stackable. Also we have other sizes - please contact us in case of interest.
TECHNICAL SPECIFICATIONS Manufacturer: PFEIFER Seil- und Hebetechnik GmbH Description: Two-crane crossbeam, crane crossbeam, pipe crossbeam Type: 270092 Year of construction: 2015 Load capacity: 40,000 kg Weight: 3,150 kg Working length/gripping range: 1,920 - 7,250 mm SPECIFIC COMMENT - Variable anchor points - Ideal for transporting heavy concrete segments - Last inspection in accordance with BetrSichV 09/2023
approx. 700 gratings for pallet racks 1.05m deep, laid on - used - : Price per piece ex site: 55.- € (net)! Price for complete acceptance: 49.-€ (net) / piece! Manufacturer: unknown Type: unknown Year of manufacture: unknown Dimensions: L=1061 mm, W=894 mm Mesh size: 34.2 x 38.1 mm Frame: 40x2 mm Design: hot-dip galvanized Load capacity: 1500 kg Condition: good – very good Available: now Location: Poland
Siat Semi-Automatic Pallet Wrapping Machine Brüninghaus Siat Pallet wrapping machine Location: Bocholt Dismantling and removal by the customer on site. More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
3 compressors and a refrigerant dryer, Boge, S40 and S50, DS180 – second-hand - : Prices ex location (net): S40 /Year 1999: 1.950.-€ S40 /Year 2004: 2.450.-€ S50 /BJ 2004: 2.650.-€ DS180: Boge Compressed Air Systems offers three compressed air screw compressors and a cold drying system: Manufacturer: Boge Type: S 40 Machine No:30888 Year of construction:1999 Hours: 14,600 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 40 Machine No:46920 Year of construction: 2004 Hours: 28,400 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 50 Machine no: 30574 Year of construction:1999 Hours: 37,200 Pressure: 10bar Volume flow at 10bar: 5.40 m3/min Drive motor:37kW --- Refrigerant dryer Manufacturer: Boge Type: DS180 Machine No:398348580002 Flow ...
approx. 2,700 longitudinal bracing, for longitudinal bracing as an alternative to cross bracing, LV 3134 for span length 1,282mm – used - : Price per piece ex site: only 4.- € (net)! 4 pieces are needed per field! Manufacturer: SSI Schaefer Type: LV 3134 Year of construction: 2021 Field length 1,282mm Shelf height 40mm Original price per piece: approx. 12.-€ (net) Longitudinal braces Sheet steel, painted light silver. For longitudinal bracing as an alternative to cross bracing, if cross braces in the double rack interfere with storage or if both sides are to be operated in the single rack. In order to ensure subsequent height adjustability, the frame distance for double racks must be at least 30 mm. In each shelf space of a rack row, the lower and upper shelves are to be provided with 2 longitudinal supports (for shelf heights up to 2967 mm). The form-fittin ...
Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking ...
The scope of delivery includes: 01x Depth bridge, used Shelving system: SSI Schaefer Material colour: RAL 5010 blue Overall length: approx. 1,065 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 946 mm Profile dimensions: U 50 x 50 x 3.00 mm Truss support: approx. 54 mm Unit weight: approx. 3.75 kg The depth web can be used for the following truss profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm Box profile widths: - 40 mm - 50 mm General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, ...
Technical data for the crate rack: Shelving system: SSI Schaefer Type: R3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,056 mm Number of shelves / row of shelves: 01 pcs. á 994 mm Number of levels plus floor level: 07 pcs. The scope of delivery includes: 02x Shelf Stand, Choice II Material colour: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. transverse and diagonal struts The stands are unassembled 1,534 mm high 300 mm deep 07x shelves, second choice Material colour: light silver lacquered Type designation: ZB4313L Dimensions: 994 x 300 x 30 mm Weight / piece: approx. 2.64 kg max. load per floor at Evenly distributed load: 100 kg 01x Cross Association, Second Choice Type designation: KV310 ...
Balers, Bramidan B20 – second-hand - : Price from location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical Raw Material Presses B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Press force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Engine (kW) 4.0 Cycle duration avg. (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of lacings 4 Type of Lacing Tape Finished bale light Yes Bale ejection automatic The classic among raw material presses The B20 is versatile and used everywhere. "Dry & Soft" must be the recyclable materials. Particularly suitable for raw materials such as cardboard, paper, cardboard (PPK) and films. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 times on one; enormous ...
Alexander von Westernhagen
