Type of machinery
(Quantity: > 9)
Type of machinery
(Quantity: > 2)
Manufacturer:
(Category: 1403)
We offer LTG-TowerMax L 70.0-304-2448-816-7510 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines are available Exterior Dimensions: Height 7510 mm Overall width 2700 mm Overall depth 2820 mm Total payload machine up to 2 x 35,000 kg 55 carriers for up to 304 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening at 950 mm above OKFF, then 915 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
modernized machine with new LTG-StoreControl P control system Control expansion optionally possible Exterior Dimensions: Overall height 8,700 mm Overall width 3,500 mm Installation depth 1,580 mm 51 carriers with a payload of 350 kg each in clear usable dimensions: H = 255 mm W = 3,050 mm T = 520 mm Chain jump 305 mm 51 galvanized intermediate floors Total payload up to 19,000 kg Side table in 990 mm above OKFF with NiRo worktop, 315 mm deep Colour scheme grey Motor power drive 1 x 3.8 kW / 400 Volt subject to errors, technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in D, A and other neighboring countries
Modernised machine with new LTG control system StoreControl L currently 6 identical machines available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...
SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...
SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...
Note: The IBCs were filled with an acid for feed (main ingredient formic acid). Is not dangerous goods according to ADR, but subject to identification according to Hazardous Substances VO. The containers are empty, but not cleaned. The scope of delivery includes: 01x Water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 litres incl. tap on metal, wooden or plastic pallet Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
length: 1200 mmwidth: 600 mmheight: 840 mm: 6 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...
Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...
length: 1500 mmwidth: 700 mmheight: 840 mm: 3 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
18 x 2pcs and 10 x 3pcs lockers – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: only 75.-€ (net) / piece (unit)! Manufacturer: Type: Year of manufacture: unknown Width of 3 units: approx. 90cm Depth: approx. 50cm Height: approx. 1.85m Rating: good Available: immediately Location: Waltrop camp
2x Workbench – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 200.-€ (net) / piece Manufacturer: Type: Year of manufacture: unknown Dimensions: Width table top: approx. 1.50m, depth approx. 72cm, height: approx. 80cm Rating: good Available: immediately Location: Euskirchen
AS/RS, TGW with 2xMustang RBG's, 22,756 parking spaces, box size 60x 40x 35cm – used - : Price from location: only 99.500.-€ (net), plus dismantling etc.! Manufacturer: TGW Type: AS/RS, Year of Make: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 pieces Lanes: 3 Dimensions of the system: length x width x height: 64 x 13 x 7.90m Storage locations: 22,756 pieces Payload: 50kg/crate Load units (dimensions max.): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan is available as DWG – also further technical descriptions Stacker crane Mustang Basic unit: The Mustang single-mast storage and retrieval machine is used for automatic loading and retrieval Retrieval of containers to a high-bay or flow warehouse. This storage system can also be used to feed workstations in ass ...
Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop
approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg
Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven
Round profile pliers Z50 2.500kg 300-800mm North Griffin Load handling devices NP >2.5000€ like new, not used
STILL electric forklift mod. R50/15 3-wheel – CE compliant – used with new V24 battery - Flow q.li 15 - Sideshift - Riser mm. 3500 - Battery with 1800H - Complete with charger - COMPLETE WITH MANUAL AND CE DECLARATION
A rail-mounted gantry crane Kranbau und Fördertechnik is available. Load capacity: 10000kg, outreach range: 1m-6m, turning device inclination angle: 20°, Max. torque, rotational speed: 2.6m/min, dead weight: 2600kg. Documentation available. An on-site inspection is possible.
Load capacity: 1800kg, drive wheels: single, rated power: 42kW, lift height: 3290mm, load center: 500mm, mast model: 5V15C33, operating hours: approx. 1116h. Documentation available. An on-site inspection is possible.
GEBHARDT ConVer 146.02 freight elevator, 2 stops, doors at the bottom front - upper stop at the back, drive at the top right Conveying height 4,580mm (heights adjustable) Car width 1200mm/ Car depth 1460mm/ Car height 2000mm Ramp 60mm/ pit possible Year of manufacture 2007 Delivery time for adaptation approx. 8 weeks without changes 4-6 weeks
Gebhardt Freight Elevators ConVer 146.03, 4 Stops, Doors Bottom Front Upper Stops Rear, Drive Top Right and Top Left, Colour 5019/7053 Conveying height 9600 mm (heights adjustable) Car width 2800 mm / Car depth 2060 mm / Car height 2000 mm Drive-on ramp 100/ pit 120mm possible Year of construction 2017 Delivery time with adjustment approx. 8 weeks, without changes 4-6 weeks the price quoted is only an approximate price per machine without assembly/freight and VAT (exact price will be calculated depending on the renovation work required) Seller Offer No. resale 2170139/2170140
An ABUS lightweight portal hall crane is available. Load capacity: 1000kg, dimensions X/Y/Z: 1000mm/4000mm/3280mm. An on-site inspection is possible.
used small load carriers C-KLT 6414, polypropylene, W 600 x D 400 mm, up to 50 kg, light blue External dimensions W x D x H [mm] 600 x 400 x 148 Floor version: closed Design walls: closed Temperature deflection from -20 to +50 °C
length: 2700 mmwidth: 2700 mmWorking height: 840 mmHexagonal workbench / Group workbenchHexagonal workbench with 3 drawers per blockand 5 vices from the manufacturer Heuer-Front.Dimensions: 2.70 m x 2.70 m, approx. 500 kgDrawer front height 140/160/160 mm, housing height 600 mm, housing width 430 mm with 6 foot sectionsBeech multiplex worktop with metal edge protectionSome of the drawer strips are damaged (see photos). Can be reordered from the manufacturer Rau.Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Meta The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.00 mm Drill hole Ø: approx. 11 mm Hole spacing (measurement center – center hole): approx. 90 mm Weight: 0.45 kg | Piece Your contact person in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
