Manufacturer:
(Category: 1402)
A Somos conveying device for pneumatic conveying of free-flowing granulates and regrinds is available. Useful volume: 90l, product nozzle diameter: 84mm, clean air nozzle diameter: 84mm, max. operating temperature: 150°C. Documentation available. On-site inspection is possible.
Two Rothstein and Plast Service conveyors are available. 1) Inclined conveyor Rothstein RO80 3000x300, year of construction: probably 2005, length: 3000mm, width: 300mm, max. load: 7kg/m, rated power: 0.18kW. 2) Ascending conveyor Plast Service. On-site inspection is possible.
A chip conveyor for DMG Mori machines is available. Height: 1650mm, width: 1870mm, length: 3560mm, weight: approx. 600kg. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.
A waterproof trough conveyor belt, therefore well suited for wet goods such as a food washing system (vegetables/fruit), is available. Material: stainless steel, belt width: 370mm, trough width: 400mm, trough height: 150mm, total length: 12300mm, total width range: 500mm-600mm. Without motor. Documentation available. On-site inspection is possible.
An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.
weight max.: 1 tclamping width: 810 mmColour: 7016 RALlength: 1210 mmwidth: 810 mmheight: 590 mmgear diameter: 175 mmdimensions of the machine ca.: 1370 x 840 x 605 mmRobust pallet trolley for the safe and easy transport of pallets inworkshops, warehouses or factories-Made in Germany.- Four catch corners prevent the load from slipping during transport.- The pallet chassis is easy to move thanks to the castorsmaneuver. The transport can be carried out with low rolling resistancewill.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 1000 kgfork length: 1150 mmstroke height: 2900 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2 x 1 x 2,5 mNo. 4635Electric pedestrian stacker / high lift truck 1 tonneTOYOTA 7 SM 10 / 24 VWorking range: Lifting height 2900Control: Nominal load capacity 1000 kgCharger 24 VWeight approx. 580 kg (without battery)plus battery weight approx. 150-200 kgDevice works - battery defectiveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
There are 2 pallet roller tracks available with separation and brake rollers at the end of the track. Format: pallets 1200mm/800mm, length: 4000mm, width: 1000mm.
There are 6 KSB, Elektra and VEM pumps available. 4x KSB, 1x Elektra and 1x VEM.
A J. Horstmann pallet magazine is available. Pallet type: Euro pallets, pallet dimensions X/Y: 1200mm/800mm, number of pallets: 15, documentation available. On-site inspection is possible.
Two identical Profipack container height conveyors are available. Capacity: 25 cycles/min for 6, 8 and 12 packs, dimensions X/Y/Z: approx. 1100mm/1000mm/4100mm.
Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible.
Two Groba ascending conveyors are available. 1) Length: 5700mm, height: 2900mm, outer corrugated edge width: 540mm, inner corrugated edge width: 480mm, cleat height: 35mm. 2) Height: 3500mm, length: 4600mm, width: 500mm, cleat height: 35mm.
Two similar Netzsch progressive cavity pumps are available. Power: 15kW, max. delivery pressure: 8bar, delivery rate: 1000l/h, speed: 1450rpm, max. viscosity: 1000Pas. One of the machines is mobile. On-site inspection is possible.
A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.
Various conveyor belts, Z-slope conveyors, Z-track conveyors, belt conveyors and a conveyor belt with cleats from the manufacturers Göztepe and Lübke are available. Documentation for Göztepe available. On-site inspection is possible.
Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible.
Suction capacity: 78m³/h, final pressure: 60mbar, motor power: 1.5kW, speed: 1500rpm, weight: approx. 200kg. Documentation available. On-site inspection is possible.
A complete bucket conveyor system is available. 1) Mobile bucket, year of construction: 2016, volume: 1000l. With internal coating and drives. 2) Mobile bucket, year of construction: 2013, volume: 1000l. The machine is overhauled, including drives. 3) Mobile bucket, volume: 1000l. The machine is not overhauled, with drives and dismantled rotary motor. 4) Switch. 5) Running rails, length: approx. 150m, track width: 1000mm, year of manufacture: 1970-1995, including two 90° curves and partly with lattice girders and reinforcements. 6) Running rails, year of construction: 2018, length: approx. 96m. Including two 45° curves. The bucket conveyor system is without gantries. On-site inspection is possible.
Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.
A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.
A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.
A total of 3 Ambaflex spiral height conveyors are sold. The conveyors are designed for the transport of goods/products upwards (other floor, second level in a bottling plant, etc.). Previously, trays were supplied with the conveyors. transported upwards. The machines are in top condition, some as good as new and ready for immediate use. The pictures show one of the three sponsors as an example. Data on the spiral conveyors: 1. Spiral height conveyor: - Make: Ambaflex - Year: 2021 - Capacity: adjustable, his max. 1,600 cartons/h - Total height (floor to conveyor outlet trays): approx. 7.90m - Overall set-up dimensions (incl. motor at the top): approx. 8.40 m Width of conveyor belt in the spiral: 0.30m 2. Spiral height conveyor: - Make: Ambaflex - Year: 2021 - Capacity: adjustable, his max. 1,600 cartons/h - Total height (floor to conveyor ...
Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings-Needle bearing: roller bearing-Inside: Ø 320 mm-Outer: Ø 359 mm-Width: 175 mm-Weight: 19 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 90 mm-Piston rod: Ø 40 mm-Diameter eyes: 35/35 mm-Stroke: 55 mm-Number: 2x cylinders available-Price: per piece-Dimensions: 555/210/H110 mm-Weight: 16 kg
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers-Shaft: Ø 39 mm-Shaft length: 470 mm-Recording hole: Ø 17 mm-Number: 4 pieces of shock absorbers available-Price: per piece-Dimensions: 1755/140/H100 mm-Weight: 24 kg/piece
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 75 mm-Piston rod: Ø 40 mm-Stroke: 120 mm-universally applicable:-Number: 1x available-Price: per piece-Dimensions: 485/105/H105 mm-Weight: 11 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling-Claw coupling: Torsionally flexible claw coupling-Bohrung: Ø 10 mm-Dimension: Ø 108 x 95 mm-Weight: 3.5 kg
Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle, linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, servo motor, electric motor, DC motor-Spare part comes: from a machining center BJM type ALBZ-145-Travel: 2430 mm-Servo motor: manufacturer Beckhof type AM3074-0Q40-0000-Max. Speed: 2500 rpm-Power: 7.35 kW-Torque motor: 48.8 Nm-Number: 2x rails available-Price: complete-Dimensions piece: 3740/200/H405 mm-Transport dimensions: 3740/400/H405 mm-Weight complete: 444 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 40 mm-Piston rod: Ø 25 mm-Stroke: 100 mm-universally applicable:-Number: 1x available-Price: per piece-Dimensions: 355/80/H50 mm-Weight: 3 kg
Innovac GmbH
