Type of machinery
(Quantity: > 2)
Manufacturer:
(Category: 1402)
Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit-Hydraulic tank: Hydraulic tank for hydraulic unit-Hydraulic tank: with level and temperature indicator-Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6-Individual components: see photos-Dimensions: 490/400/H515 mm-Weight: 25 kg.
Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: Round wire link belt stainless steel -Width: 600 mm -Length: 6.7 m -Transport dimensions: Ø 320 x 600 mm -Weight: 42.7 kg
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg
used
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg
V-belt pulley, pulley -V-belt pulley: 5-groove pulley SPC 200/5 with taper bushing -V-belt width: 22 mm -Receiver: Taper bushing manx 3535-65 Ø 65 x 90 mm (can be replaced) -Dimensions: Ø 210 x 135 mm -Weight: 18.1 kg
Pneumatic cylinder, air cylinder, pneumatic plunger, air plunger, standard cylinder, clamping cylinder -Manufacturer: Rexroth, double-acting pneumatic cylinder type 0 822 120 005 -Stroke travel: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 270/46/H46 mm -Weight: 0.8 kg/pc.
Caster, swivel caster, transport equipment caster, fixed caster, double caster -Manufacturer: Dörner & Helmer, 4 pieces swivel caster double caster with plate and brake -Type: 778310 -Wheel: Ø 50 x 19 mm rubber -Submission/Price: complete -Dimensions each: 110/60/H75 mm -Weight: 0.4 kg/pc.
Solenoid valve, flap valve, electromagnetic valve, solenoid valve Valve manufacturer: Herion, unused -Type: 2323124 -Pressure: 0-10 bar -Connection: 3/4 -Magnet manufacturer: Norgren, type 1310 -Voltage: 230 V 40 - 60 Hz -Quantity: 25 pieces available Price: per piece -Dimensions: 230/125/H100 mm -Weight: 3.2 kg/piece
For sale is an original ROBEL track lift winch type 46.50 with 10 t lifting capacity. Professional, robust track lift winch for lifting and lowering heavy loads, especially for applications in track and railway construction. Technical data: Manufacturer: ROBEL Bahnbaumaschinen GmbH Type: 46.50 Serial No.: 46.50-00459 Ref. No.: 800 465 0001 Year of construction: 2019 Load capacity / SWL: 10,000 kg Maximum lifting height: 300 mm Excavation height: 80 mm Weight: approx. 46 kg Safety crank with load pressure brake and folding handle Robust design with reinforced base plate Made in Germany CE marking The winch is in good used condition with usual traces of use and storage. Suitable as a professional track hoisting winch as well as for corresponding heavy lifting applications in compliance with the respective application and safety specifications. ...
Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.
RASM usage purpose Please contact below PIC Sai Bavani , Purchaser Top Glove F10 011-69573840
RASM usage purpose Please contact below PIC Sai Bavani, Purchaser Top Glove F10 011-69573840 / s.bavanitopglove.com.my
RASM usage purpose Please contact below PIC : Sai Bavani , Purchaser Top Glove F10 011-69573840
A gantry crane in need of repair is offered. Load capacity: 5000kg (formerly 10000kg), Demag wire rope hoist installed, bearing worn out. An on-site inspection is possible.
Working width: approx. 3600mm, load capacity: 2500kg. An on-site inspection is possible.
Bowl diameter: 1200mm, variable loading height: 1800mm-2200mm, suitable for shaft lengths up to 400mm. Inspection by appointment is possible.
Ball valve, ball valve with internal thread -Condition: very good, unused, original packaging -Material: Pressed brass -Internal thread: 2 inch -full: passage, full ball -Number: 63 ball valves available -Price: per piece -Weight: 2.1 kg
Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: unicraft, Scissor lift table, flat form lift table type SHT1001G -Load capacity: 1000 kg -Platform: 1140 x 1460 mm -Dimension when retracted: Height 82 mm -Extended dimension: Height 760 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1140/1460/H210 mm -Weight: 341 kg
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg
Used SIDEL seep-off depalletizer - Year 2013Technical Specifications & Performance DataThis Sidel Sweep-Off automatic depalletizer is designed to unload bottles and jars from palletized layers and transfer them efficiently to the downstream production line. Built in 2013, it is suitable for industrial packaging operations requiring reliable container handling at the start of a used bottling line.Manufacturer: SidelModel: Sweep-OffProduction capacity: up to 200 layers/hourProcessable pallet format: 1000 x 1200 mmContainer materials: Glass and AluminumHandled containers: Bottles and jarsInstalled power: 17.7 kWElectrical supply: 400 V, 3-phase + protective earth, 50 HzFull-load current: 32 AOperating pressure: 6 barAdvanced Automation & Control SystemsThe machine operates automatically through a Siemens S7-300 PLC and a B&R Panel PC 800 operator interface. This control architecture provide ...
Used SIDEL monocolumn Palletizer 200 Unit per hour -Year 2013Technical Specifications & Performance DataThe Sidel Monocolumn palletizer is an automatic palletizing solution designed for the efficient end-of-line handling of PET bottles in industrial packaging and beverage production environments. Built in 2013, this machine is configured to process a current bottle format of 2.0L and can reach a maximum performance of 200 layers per hour.Manufacturer: SidelModel: MonocolumnManufacturing year: 2013Container material: PETCurrent format: 2.0L bottlesMaximum capacity: 200 layers per hourSupported pallet: Eur-EPAL 800x1200 mmInstalled power: 73 kWWorking plane height: 800 mmAdvanced Automation & Control SystemsThe palletizer is controlled by a Siemens PLC, providing dependable automated coordination of palletizing movements and end-of-line material handling. The electrical system is configure ...
Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammer ...
Chemical Weighing Tank c/w Weighing Platform Capacity: 1500L Weight of Platform: 500KG PLEASE CONTACT MS. NADZIRAH (+6017-9029972) OR MS. AYU (+6019-9224329) Located at F20, Meru, Klang, Selangor.
