Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
Output: 25-49 cycles/min, film material: PA/PE composite film or polyethylene film, cushion length range: 40mm-160mm, film width range: 420mm/767mm, max. roll diameter: 280mm, machine dimensions X/Y/Z: approx. 1600mm/800mm/1300mm, weight: approx. 230kg. Documentation available. On-site inspection is possible.
Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible.
A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.
Used autoclave by Steriflow BarriQuand. New 1987. UDT valid until 2026. 4 baskets. 2 pieces available.
Available CENTION SAB-HW18 Absorption chiller machine on perfect condition. The year of manufacturing is February of 2012. It works with lithium bromide. Power: 633 kW Equipment ready to deliver at our wharehouse.
4 OTIS elevators for sale – very well maintained, fully functional! We are selling 4 elevator systems from OTIS, built in 2011. The facilities are built over 8 floors, very well maintained and fully functional. The removal is carried out by the buyer. Details: • Manufacturer: OTIS • Year of manufacture: 2001 • Facilities over 8 floors • Very neat condition • Dismantling and collection on your own • Price per unit: 5.000 € Viewing possible by arrangement. Ideal for hotels, office buildings, apartment buildings or existing projects.
Used drive-on scale made by Mewes & Goetzl, model: IT9000E, load capacity up to 1000 kg. New: 2008
Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.
The metal separator was only in use for a short time and makes a new impression Operating instructions available Availability: immediately
Used line for extruding flat plastic film for grass yarn and carpet yarn Chinese production. The line includes: - Extruder, - Filter mesh machine, - Film extraction and cutting system, including stainless steel water container, - Stretching heating oven, - 3-roll stretching machine, - Fibrillator, - 3-roll annealing machine, - 3-roll cooling machine, - Oil lubricator, - Magnetic winding machine, - Side fiber crusher, - Side blower and waste collector, - Electric control cabinet.
For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.
Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.
Used PP twine production line made by Roblon, type: T5000. Capacity ranges from 60 to 100 kg/h depending on twine thickness. THE LINE INCLUDES: - A 90mm diameter extruder with an inverter-controlled asynchronous motor, - A control cabinet with digital controllers, - A cast-in die head, - A longitudinal orientation oven for polypropylene rafi, - A single-reel winder, - A twister for winding finished twine balls, - A heating tunnel for shrinking the film on finished balls.
We have more than one separators in our stock. Pls feel free to contact with us and check our stocks any time you want.
Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible.
Manufacturer: Sysmex Model: CS 2500 Year of Manufacture: 2012 The CS-2500 is a fully automated, high-performance hemostasis analyzer designed for advanced laboratory needs. Utilizing multi-wavelength technology and PSI™ checks, it delivers precise results for coagulation, chromogenic, immunoturbidimetric, and aggregation testing—all in full random access. Compact and efficient, this benchtop system is an ideal solution for mid- to high-volume laboratories. Find more here - .ucymachines/ Contact us at - sales@ucymachines
A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.
A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.
A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.
A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible.
Measuring length: 500mm, measuring diameter: 160mm, max. workpiece weight: 15kg, axes: 4, measuring mode: optical/laser/fiber probe. Including hydraulic chuck and fiber insert for Werth Fiber Probe. Documentation available. On-site inspection is possible.
: 150000 kglength: 12000 mmwidth: 5000 mmheight: 1400 mm: lenkbar : lenkbar size of tyres: 645 x 250 mmdimensions: 14,4 x 5,0 x 1,4 mHeavy duty trailer with- Double steering- small turning circle- very robust, therefore low maintenance- Reversible drawbar- 50mm impregnated wooden support. (Picture is with steel pad)- Standard paint changes. On request in their Ral color.Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockersWould you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15000 kglength: 10000 mmwidth: 2450 mmheight: 625 mm: lenkbar : lenkbar size of tyres: 425 x 260 mmweight of the machine ca.: 2,9 tdimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mmHeavy duty trailer with- Double turntable steering- small turning circle- Tilt-proof due to steering lock limitation- very robust, therefore low maintenance- Reversible drawbar, Length 1320mm- impregnated wooden support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 10000 kglength: 6000 mmwidth: 2450 mmheight: 587 mm: lenkbar : lenkbar size of tyres: 406,4 x 254 mmweight of the machine ca.: 2,1 tdimensions of the machine ca.: 7,2 x 2,5 x 0,6 mmHeavy load trailer with- double steering- small turning circle- Tilt-safe as steering angle limit- robust, low maintenance- reversible drawbar, Length 1320mm- 50mm impregnated wood overlay.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 5000 kglength: 6000 mmwidth: 2450 mmheight: 527 mm: lenkbar : lenkbar size of tyres: 406,4 x 127 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 7,2 x 2,45 x 0,527 mmHeavy load trailer with- double steering- small turning circle- Tilt-safe as steering angle limit- robust, low maintenance- reversible drawbar- 50mm impregnated wood overlay.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40000 kglength: 9000 mmwidth: 3000 mmheight: 900 mm: lenkbar : lenkbar size of tyres: 540 x 300 2-fach mmdimensions: 10,9 x 3,0 x 0,9 mHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35000 kglength: 7000 mmwidth: 2500 mmheight: 600 mm: lenkbar : lenkbar size of tyres: 8 Stk. 450 x 300 mmweight of the machine ca.: 3,9 tdimensions of the machine ca.: 8,9 x 2,5 x 0,6 mmHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 20000 kglength: 6000 mmwidth: 2450 mmheight: 697 mm: lenkbar : lenkbar size of tyres: 450 x 300 weight of the machine ca.: 2,8 tdimensions of the machine ca.: 7,2 x 2,5 x 0,7 mmHeavy load trailer with- double steering- small turning circle- Tilt-safe as steering angle limit- robust, low maintenance- reversible drawbar, Length 1320mm- 50mm impregnated wood overlay.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
