Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
Impact tester with motoric hammer lifting and protection housing- ready equipet for testing according CHARPY ISO148 (EN10045)- Demo-Machine (as new)- potential energy: 300 Joule- alternate models: 150 / 300 / 450 / 600 / 750 J.- warrenty period 24 month- see also the photos of optinonal items; new
Claw vacuum pumpdryManufacturer: BuschType: Mink MM 1322 AVMotor: DS 400VSuction power: 300 m3/hEnd pressure: approx. 150 mbar (abs.) Performance: 12 monthsCondition: Newashoer: suction filter; Operating instructionsDelivery time: short-term; ready for use
Claw vacuum pumpdrymanufacturer: BuschType: Mink MM 1252 AVMotor: DS 400VSuction power: 250/300 m3/hfinal pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructionsDelivery time: short-term; ready for use
Rotary vane vacuum pumpManufacturer: LeyboldType: Sogevac SV280Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Waelz piston pump (rootsblowesis)Manufacturer: PfeifferType: WKP 2000 ASuction suction systems: approx. 2065 m3/hengine: 5.5 KWCat. Nr.: PP W61 000Status: GeneralueberholtGewaehrleitung: 12 monthsIncluding: oil filling, user manual; ready to use
Rotary vane vane vacuum pump- packaging Manufacturer: BuschType: 251-512Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use
Rotary vane vacuum pump- packaging-Manufacturer: BuschType: 220-80Vacuum: 0.5 mbarStatus: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Rotary vane vane vacuum pump- packaging Manufacturer: BuschType: CB0251BVacuum: 0.5 mbarStatus: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.
Waelz piston pump (roots blow-Manufacturer: PfeifferType: WKP 500 ASuction moulds: approx. 500 m3/hCat. Nr.: PP W31 001Status: GeneralueberholtGewaehrleitung: 12 monthsIncluding: oil filling, operating instructions; ready to use
Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use
Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use
Infrared camera system FLIR ThermaCAM P60 PAL To detect, collect, analyze and document of thermal conditions in industrial and automotive technology needed from business, built in 2004, little used, has in the meantime been calibrated with documentation
FOR SALE 4 UNITS ALFA LAVAL S 826 separator YOB 2005 V 380 Hz 50 TO WHOM IT MAY CONCERN; WE VE COMPLETE 4 SETS ALFA LAVAL S 826 SEPARATOR AT OUR STOCK . WE VE ALSO CONTROL PANEL ELECTRIC BOXES ETC... SEPARATOR BOWLS HAS NO ANY DEMAGES. SEPARATORS ARE IN GOOD WORKING CONDATION. SEPARATOR USED AS OIL SAPARATORS AT PAST TENSE. PLS FIND SPECIFICATION ON BELOW. SEPARATORS ARE READY TO TRANSPORT . MAKER ALFA LAVAL TYPE S826 SERIAL OF NO. S 4135619 / 4135620 / 4135621 / 4135622 YEAR OF BUILT 2005 PRODUCT NO. 881201-06-01 VOLT 380V FREQUIENCY 50 Hz MAX SPEED BOWL 12129 r/min MOTOR POWER 5.5kW MADE IN SPAIN IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH U ...
Spare blade for Längsschneiddysteme (slitting lines) 10 piece circular knives (upper blade) 100 x 70 x 1, 2 (or similar size) with 10 bit holder shaft. NEW. 10 piece counter knife (bottom) 78 x 55 x 10 (od similar dimensions). NEW. For slides or paper industries. Alternative dimensions on request.
used
Qty. 1 Second-hand extrusion press Manufacturer: Loewy Type: 4 column floating - mandrel piercing press Aprox year of manufacture: 1939 Container size (dia.): 406 & 508 mm 16" and 20" Container size (length): 1350 mm Billet size (length): 1000 mm Nominal Extrusion Force: 5000 MT Nominal Piercing Force (Max): 740 MT Mandrel arresting Force floating mandrel Stroke Main ram: 2750 mm Piercer : 1200 mm
Screw vacuum pumpManufacturer: BuschType: NX 450 ASuction plugs: 450 m3/hPerformance: 12 monthsIncluding: operating instructions, oil filling Status: as available as new date: by arrangement; ready for use
Sprueh cleaning system for small to medium batches, for workshop, maintenance or interim cleaning, cleaning with hot water, spruehkabine as top - loaderabhaenging of model: basket diameter 820 - 1250 mm, load capacity 80 - 300 kg, spruehdruck 1.8 - 3.5 bar, heating 4.5 - 12 kW, optional: thermostat 0 - 90,Timer, oelskimmer, filtration, be- and unloading trolley; optional: thermostat 0 - 90,timer, oelskimmer, filtration, be- and unloading trolley; New
Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car; NEW
Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm,depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer
Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm,depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer; New
Ultrasonic cleaning systems, washing systems as single or multi-chamber systems, with or without handling system, can be realized in various standard size, special needs can be realized
Tunnel washing systems / cleaning systems with foerder belt, roller conveyor or lifting converter, with the functions pre-cleaning, cleaning, sprouts, drying etc. The tunnel cleaning systems can be tailored precisely to the respective customer requirements
