Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
Semi-automatic flocking system Flockkabine Manufacturer: The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. Plant size: Width: approx. 6.5 m Depth: approx. 2.8 m Height: 3, 3 m Lock doors Width: approx. 900 mm Height: approx. 600 mm
Semi-automatic flocking system Flockkabine MAAG flocking technology The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the parts were coated for the automotive industry.
maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.
Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m
Semi-automatic flocking system The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. The handheld boxes hung on a chain conveyor belt and were first sprayed with glue by hand. Afterwards, the boxes were sprayed with the flocking material in the individual flock cabins. The spraying direction changes from station to station.
Gearbox due to re-motorization PTO drive shaft is inclusive Reduction 4,987:1
Due to new motorization In the current state Expanded turning hours plus minus 42,000
Electron microscope Brand: Jeol Microprobe Type JXA-8900RC Built in 1996 (S/N XM120052-170) All documents and measurement protocols are available. Many accessories Not checked for functionality Sold only to commercial enterprises! All information without guarantee
2 pcs used REINTJES gearbox type WAV 1400 once left/left and one-off left/right Undertone 2,040/1
LINX-SL501-CO2-Laser Engraving machine equipped with fume extraction unit. Machine in perfect working condition. LINX SL 501 is one of the fastest Laser marking machines ever, it makes 90 marks per minute and its developed for the line productions for marking glass, papers, plastic and other non metal parts, As well metal, but just taking coloured skin out.
CS Instruments Leaking detector for comprressed Air systems controling. Unused in Suitcase.
Furrance 300c- HERAEUS T6120 Machine is in good working condition
Industrial Metal and plastic cleaning machine: COLOR-DEC ITALY GREAT CONDITION
Pull-off table after gate roller aisle left - right drop 6 meters long 3 meters wide
Micro hardness tester Vickers HV0,001 to HV 30 (depending on type) from 1 gram - all force levels force-controlled The FALCON 400 series are micro-hardness testers for a test force range of 0.001 to 30 kgf (depending on the type) for the micro Vickers, Knoop and Micro-Brinell hardness testing methods. The unique test force load system includes an electronic control system in the closed control circuit and sensor technology with force feedback. In addition to the electro-mechanical test force load, the FALCON is equipped with first-class mechanical and optical components. The innovative software functions of the I-Touch™ "control" allows the storage of results, creation and storage of test programs, overwashing of results (limit input), conversion to other hardness scales and curvature corrections for measurement on unplanned test surfaces. The digital / optical hardness impressio ...
Brinell hardness tester with fully automatic test sequence, automatic Brinell hardness impression measurement The machine is equipped as standard with a motorized 6-fold turret head (3 penetration bodies, laser positioning system and 2 lenses with ring light). The video measuring system with 18-MP video camera delivers excellent images, the automatic evaluation of the Brinell-Calotte impression is extremely fast and very precise. With this fully automatic hardness tester, only START has to be operated after the focus: The impression and the evaluation are fully automatic. At the touch of a button, a test certificate is automatically generated. The IMPRESSION™ hardness test software with digital zoom function, offers numerous functions for converting Brinell hardness results into other hardness scales or tensile strength. Highlights of the machine: - Hardness scales: All Brinell ...
NEMESIS 5100 - Universal hardness tester with turret head (saves changing indenting bodies and lenses) THE ultimate universal hardness testing machine - all-rounder: stand-alone or fully automatic hardness gradients (requires motor XY table) This hardness testing machine sets the reference in the current state of the art. The basic function is based on a test head lowering to the test piece on which a turret head with up to 8 positions is installed. This is particularly advantageous if the test piece is very heavy or if an automatic feeding system is to be used. In addition, the user does not have to worry about focusing: The automatism finds the correct test height / focus distance automatically (detecting search). The desired hardness test method can be conveniently selected on the large touchscreen monitor. Now the operator presses START and the automated test begins: - aut ...
Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...
The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...
The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...
used
Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor
Our Edwards GV250 dry vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Edwards GV250 Dry pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Our Edwards GV600 dry vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Edwards GV600 Dry pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Jetzone furnace Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: SND 1.5 x 202 Year: 2016 Productivity: 450 kg / h Dimensions: 8136 x 3581 x 4376 Heating medium: natural gas Description: A high-speed dryer consisting of two main elements: a fitting equipped with heating and distribution elements, and a production conveyor.
Used SHREDDIES production line Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: 5-station SHREDDIES production line Year: 2016 Description: A five-line production line for multilayer flakes from crushed grains. Finished product capacity: 700 kg / h Line speed: 54m / min. Finished product density: 200> 220 g / l Overall dimensions and setting of the machine: length x width x height: approx. 10929 x 1600 x 4685 Design diameter of the grinding roller: 203 mm Design working width of the chopping roller: 210 mm Rotational speed of the grooved roll: 20-85 m / min. Design number of positions: five (four working, one spare) Design width of cutting station conveyor: 230 mm Nominal design width of the edge trim: 12 mm per edge, total 24 mm Design product size: approx. 25 x 25 mm Technical data: Dimensions (length X width X height): Power supply: 400 V, 3 phases, 50 Hz Control v ...
Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o "rectangular" forms 28 places for pralines (14 pralines, "violin" shape, 14 pralines each) trumpet shape) o "rectangular" forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape "piano") o Molds in the shape of a "trunk" 28 places for pralines o "Small ball" shaped molds 28 places for pralines o "Big ball" forms 28 places for pralines o "Square" forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms "bears", "cats" 56 places for pralines (28 "bears", "cats" each) ...
