british flag
Resale Logo

Category 306: moulds

back back back
 banner advertisement information injection machines  D&M MACHINERY LTD  http://www.dmmachinery.co.uk 
banner logo
start page > machines for plastic > all moulds > results
 
56 offers order by
post used machinery: registration     
No. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
page 1 > 2 3
121594970
KOREAN MAKER CUISINART
Injection moulds

WE HAVE USED MOLDS, TOTAL 6 SETS, IT IS A AIT-TIGHTEN TYPE PACKING. WE CAN SHIP IMMEDIATELY. LL MOLDS HAVE A HOT RUNNER SYSTEM.
used machine
 
WE HAVE USED MOLDS, TOTAL 6 SETS, IT IS A AIT-TIGHTEN TYPE PACKING.
WE CAN SHIP IMMEDIATELY.
LL MOLDS HAVE A HOT RUNNER SYSTEM.
2016
Price  
  KR   request
121565941
INOPRESS 100 K-400
Hydr. Press of double stand INOPRESS generalüberh.

1 hydraulic double-column press 400 to-neuwertiger TOP condition - VIDEOZ.B. for composite/composites! Manufacturer: INO press - press technology Waiblingen Model/type 100 K-400 Built in 2000 Machine number 20445  ...

 
1 hydraulic double-column press 400 to-neuwertiger TOP condition - VIDEOZ.B. for composite/composites!

Manufacturer: INO press - press technology Waiblingen
Model/type 100 K-400
Built in 2000
Machine number 20445

The press has been reset by us on the Mint original condition. We have original overtaken the press, all wearing parts were replaced and checked. The press was 100% deep clean with dry steam cleaners and then original repainted light grey. The press has little operating hours after our determination. The guides have been fully serviced and are in like new condition. The press has been reset by the initial bet on original condition. The press can be used depending on the customer requirements in the field of Metal / Nonmetal also suitable for heated tools or composite / compound materials, so cold or hot forming processes,-hot pressing process, foaming, temperature control, etc. Mr. Eiblmeier especially as plastic presses specialist with 30 years experience is entitled to your VerfuegungEs GRP were made previously molded parts made of polyurethane. The press closes in free fall

Type: 100 K-400
Year of construction: 2000
Machine number: 20445

Pressing force: approx. 400 to
Clamping stroke: approx. 800 mm
Closing speed: approx. 400 mm / s
Opening speed: approx. 350 mm / s
Pressing speed: approx. 350 mm / s
Opening width: max distance press plate approximately 1,200 mm
Maximum pressure: 30 MAP
Height above ground: approx. 800 mm
Table area: approx. 1,600 x 1,300 mm
Weight: 40,000 kg
Weight hydraulic unit incl. oil: approx. 3,800 kg
Weight: electric cabinet: 800 kg

with 2-hand operation, Fabr. TELEMECANIQE, type: XY2 SB with SicherheitsschrankeSchaltschrank with control, Fabr. SIEMENS, type: SIEMATIC OP27 with device for recording Electr. -powered heaters

-The press has a water - cooling unit on request make Reshler type TAEEVO 161 year 2008 description: Wassertempereriergeraet can be used for / tested for water cooling and in good condition, cooling kw 25

-The press has checked on demand heater control/control for heated tools with heaters and maintained

-Our presses specialist Mr Eiblmeier is available for professional advice or customer requirements. Over 30 years experience in the field of plastics, composite, cold / hot pressing process, foaming, tempering, etc. especially as plastic presses specialist and extensive references are available.

Our service options for customers
Optimisation / modification of the press according to customer requirements
Control optimization
Delivery
-Building
Commissioning acceptance
-Accident prevention regulations service, training, consulting, etc.

Visit love by appointment
Price upon agreement and your request
Location of the press in the region of Sinsheim - Baden-Württemberg
 
Price  
    request
121505263
WOLLIN PSM 324-6
Mould Spraying Machine

X-travel: 1000mm, y-travel: 900mm, clamping force: 200-900t, control: NC 10N.
used machine
 
X-travel: 1000mm, y-travel: 900mm, clamping force: 200-900t, control: NC 10N.
1998
Price  
  DE   request
121488467
EU mold for GARDEN CHAIR

1 pc Used mold for garden chair, 1 mold Product dimensions: L= 53 cm W= 57 cm H= 73 cm Weight: 3 kg (with CaCO3) Very stable. Needed IM Machine: 800-1000t Tiebars: 1000 mm x 800 mm (V)

 
1 pc Used mold for garden chair, 1 mold
Product dimensions:
L= 53 cm
W= 57 cm
H= 73 cm
Weight: 3 kg (with CaCO3)

Very stable.

Needed IM Machine: 800-1000t
Tiebars: 1000 mm x 800 mm (V)

 
15,500 €  
  SE   request
121488464
EU molds for ARCHIVBOX (H/V)

2 pcs molds for ARCHIVBOX: Size: A4 2 pcs molds: 1 pc for horisontal Box (on the photos) and 1 pc for vertical box Needed machine: 150t

 
2 pcs molds for ARCHIVBOX:
Size: A4

2 pcs molds:
1 pc for horisontal Box (on the photos) and
1 pc for vertical box

Needed machine: 150t
 
1,800 €  
  SE   request
121488459
EU mold for Small CHAIR

1 pc Used mold for Small CHAIR Product dimensions and weight: L= 39 cm W= 27 cm H= 31 cm Weight: 1,1 kg Needed machine: 450t

 
1 pc Used mold for Small CHAIR

Product dimensions and weight:
L= 39 cm
W= 27 cm
H= 31 cm
Weight: 1,1 kg

Needed machine: 450t
 
3,300   
  SE   request
121488456
EU mold for SQUER BASIN 80 l

1 pc Used mold for SQUER BASIN 80 ltrs Product dimensions and weight: L= 89 cm W= 46 cm H= 31 cm Weight: 2,3 kg Needed IM Machine: 800-1000 t

 
1 pc Used mold for SQUER BASIN 80 ltrs

Product dimensions and weight:
L= 89 cm
W= 46 cm
H= 31 cm
Weight: 2,3 kg

Needed IM Machine:
800-1000 t

 
11,000   
  SE   request
121488451
EU mold for STORAGE CRATE

1 pc Used mold for STORAGE CRATE Product dimensions and weight: L= 39 cm W= 29 cm H= 29 cm Weight: 1,5 kg Needed IM Machine: 500-600t

 
1 pc Used mold for STORAGE CRATE

Product dimensions and weight:
L= 39 cm
W= 29 cm
H= 29 cm
Weight: 1,5 kg

Needed IM Machine: 500-600t
 
4,300   
  SE   request
121337577
EU COMMODES (Cabinet)4pcs drawers

Used molds for COMMODES (cabinet) with 4 pcs drawers 12 pcs molds Product dimensions: L= 48 cm W= 40 cm H= 93 cm Weight: 5 kg Good condition

 
Used molds for COMMODES (cabinet) with 4 pcs drawers
12 pcs molds

Product dimensions:
L= 48 cm
W= 40 cm
H= 93 cm
Weight: 5 kg

Good condition
 
13,500 €  
  SE   request
121337576
EU LAUNDRY BASKET 30 ltrs

Used molds for Laundry Basket 30 ltrs 2 pcs molds: basket + cover Testing of the mold possible

 
Used molds for Laundry Basket 30 ltrs
2 pcs molds: basket + cover

Testing of the mold possible
 
2,900 €  
  SE   request
121337575
EU LAUNDRY BASKET 50ltrs

Used molds for Laundry basket 50 ltrs 2 pcs molds: basket + cover There is possibility to test the molds

 
Used molds for Laundry basket 50 ltrs
2 pcs molds: basket + cover

There is possibility to test the molds
 
4,500 €  
  SE   request
121176563
EDI ULTRAFLOW
Sheet extrusion dies

COEX adapters for wide-slit nozzle up to 5 layers are possible with an appropriate module

 
COEX adapters for wide-slit nozzle
up to 5 layers are possible with an appropriate module
 
Price  
    request
121163529
KTW 24 cavity closure mould
Injection moulding tools

KTW 24 cavity closure mould, redesigned to 28mm PCO 1881 one-piece closures, year 2007 : – including cold half for CSD closures 2.2 g ± 0.1g – including cold half for NON CSD closures 1.9g ± 0.1g Cycle time  ...
used machine
 
KTW 24 cavity closure mould, redesigned to 28mm PCO 1881 one-piece closures, year 2007 :

– including cold half for CSD closures 2.2 g ± 0.1g
– including cold half for NON CSD closures 1.9g ± 0.1g

Cycle time : 4.4 sec ± 0.2s
Available immediately.
2007
Price  
  UK   request
120915899
BBG BTF-F
Mould Carrier

Clamping surface: 1400x900mm, parallel stroke: 250mm, clamping force: 300kN, height: 900mm, including hydraulic aggregate, cabin and light barrier available.
used machine
 
Clamping surface: 1400x900mm, parallel stroke: 250mm, clamping force: 300kN, height: 900mm, including hydraulic aggregate, cabin and light barrier available.
 
Price  
  DE   request
99831557
PTEG
Block Mold

Block length: 9000-10300mm, block height: 1320mm, block width: 1060mm, includes vacuum, hydraulic, machine silo, various documents.
used machine
 
Block length: 9000-10300mm, block height: 1320mm, block width: 1060mm, includes vacuum, hydraulic, machine silo, various documents.
2000
Price  
  DE   request
99831553
KURTZ Vario
Block Mold

Block length: 4080-5300mm, block height: 1300mm, block width: 1040mm, includes vacuum, hydraulic, block outlet and release lever, operational guide, documentation, spare part list.
used machine
 
Block length: 4080-5300mm, block height: 1300mm, block width: 1040mm, includes vacuum, hydraulic, block outlet and release lever, operational guide, documentation, spare part list.
1997
Price  
  DE   request
99831549  
HIRSCH OE 5
Block Mold

Block length: 2040mm, block height: 540-1050mm, block width: 1050mm, includes vacuum, hydraulic, maschine silo, steam reservoir, installation guide, various documents.
used machine
 
Block length: 2040mm, block height: 540-1050mm, block width: 1050mm, includes vacuum, hydraulic, maschine silo, steam reservoir, installation guide, various documents.
2000
Price  
  DE   request
80345750
ILLIG Lid Mold for ILLIG RDM 42/ 3
Lidformer Mould

used ILLIG RDM 42/ 3 Lid Mold No. D-95 UEB to fit 95 mm Cups, outside rim dia. 97.6 mm (Cutting dia.), 4-Cavity complete with Stacking Chute. This Mold is in stock at our warehouse in Germany

 
used ILLIG RDM 42/ 3 Lid Mold No. D-95 UEB to fit 95 mm Cups, outside rim dia. 97.6 mm (Cutting dia.), 4-Cavity complete with Stacking Chute.

This Mold is in stock at our warehouse in Germany
 
Price  
  DE   request
80345739
MARBACH for ILLIG RDM 70K
Thermoforming Mould

1 x used Rect. Tub Mold for the ILLIG RDM 70K Thermoformer, manufactured by Bosch Spang :- Age 2002 (only used for a very short time) 12-Cavities, for PP Containers Dimensions of the punching knives 131.0 x 95.1 mm  ...
used machine
 
1 x used Rect. Tub Mold for the ILLIG RDM 70K Thermoformer, manufactured by Bosch Spang :-
Age 2002 (only used for a very short time)
12-Cavities, for PP Containers
Dimensions of the punching knives 131.0 x 95.1 mm
Inserts for 72 mm, 56 mm, 38 mm, 32 mm, 27 mm, 24 mm Container heights.
Inclusive of matching Collector Plate and Stacking basket

Matching Lid Mold available for the ILLIG RDM 58/ 3 Lidformer.

This Mold is in stock at our warehouse in Germany
2002
Price  
  DE   request
72056552
MOULD Adjustable leg
Injection moulds

Item name : Adjustable leg 40x40 M22 Male part Item Weight : 20 g PA Number of cavities : 2 pcs Machine size : 170 T whit hydraulic core pull system Plan size : 400 x 350 mm Mould height : 430 mm Run time : 45 sec ...

 
Item name : Adjustable leg 40x40 M22 Male part
Item Weight : 20 g PA
Number of cavities : 2 pcs
Machine size : 170 T whit hydraulic core pull system
Plan size : 400 x 350 mm
Mould height : 430 mm
Run time : 45 sec.


Item name : Adjustable leg 40x40 M22 Female part
Item Weight : 10 g PA
Number of cavities : 4 pcs
Machine size : 75 T
Plan size : 300 x 350 mm
Mould height : 300 mm
Run time : 42 sec.
 
30,000 €  
  DK   request
page 1 >
You didn't find your wanted machine? to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter