machines for soil cultivation, sowing and harvesting used for sale

Clay court roller Length 1 m Width 1.55 m Height 0.80 m Weight approx. 250 kg Three-point mount Cat. 1

working width: 3000 mmNumber of gangs: 3 StNumber of folders: 0 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AT- Motor Caterpillar Typ= C13-LGK... mit 385 PS bei @2.100 RPM komplett einbaufertig mit Starter,Lichtmaschine Alter Motor MUSS Bruch-und Rissfrei sein Fotos können auf Anfrage gesendet werden. MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany MIW-Zeven.de E-Mail:info@miw-zeven.de Tel: 0049 (0) 4281-950583 Fax: 0049(0) 4281-950585

working width: 4700 mmNumber of rotors: 1 StTine arms per rotor: 16 StThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Heat output capacity: . KWair volumen: . m³/hweight of the machine ca.: . tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

working width: 6 mdistance: 50 cmnumber of aggregates: 12 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.

working width: 3 mspeed of p.t.o. shaft: . U/minnumbers of tine holder: . 0Tooth pack roller, cardan shaft, roller, trebleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green

numbers of row: 2 0distance between row: 75 cmbunker volume: 0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

Convergence measuring tape, band extensometer, extensometer-Manufacturer: Interfels, convergence measuring tape type KM-15-Reading accuracy: 0.01 mm-Accessories: see photos-Dimensions transport box: 560/220 / H180 mm-Weight: 6.8 kg

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

Counting scales, scales, parcel scales, weighing platform, operating unit, display, evaluation device, scale terminal, terminal, weighing terminal, weighing terminal-Manufacturer: Mettler-Toledo, weighing terminal type ID7-Voltage: 100V-240V 50/60Hz-Dimensions: 345/170/H175 mm-Own weight: 4.2 kg

Mercedes engine, cab, air conditioning, shredder, cutting unit 5.10 m, ber.: 620/75R30 (23.1R30) and 365/70R18, 5 shakers

Roller glue spreader, laminating machine, laminating machine, laminating machine, layering machine-Manufacturer: Hymmen, glue application machine layer machine type 36-Working width: 1300 mm-Roller diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm-Individual components: see photos-Dimensions: 2230/1100/H1410 mm-Weight: 1260 kg

Ladies and gentlemen, Offer Textile conveyor belt approx. 180 tons With a friendly greeting Trade & Translations

Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement-Manufacturer: optacom, contour measuring device type VC-10 with granite measuring plate-Measuring plate: 950 x 380 mm-Accessories: extensive accessories incl., see photos-Transport dimension: 950/480/H775 mm-Total weight: 182 kg

Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production-Kannegiesser System: BRILKA-Kannegiesser: cut and twist collar.-pneumatic: foot switch-Dimensions: 520/900/H1190 mm-Weight: 33 kg

Power supply, power supply -Input: 380 V 0.85 A -Output: 24 V 20 A -Dimensions: 280/105/H190 mm -Weight: 10 kg

Counting scales, scales, parcel scales,, weighing platform without terminal, operating unit, display, evaluation device-Weighing platform without: evaluation device for scales-Weighing range: min.0.02 kg-Weighing range: max. 12 kg-Number: 1x available-Dimensions: 330/235/H90 mm-Own weight: 4.7 kg

Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe-Manufacturer: Hommel, probe holder for roughness measuring device-Type: KVA type P2/115-Tactile path: s= 12 mm-Dimensions box: 345/130/H85 mm-Weight: 1.7 kg

Load cell, double bending beam load cell-Nominal load: 100 kg-Accuracy class: C3-Cable length: 3 m-Material: stainless steel-Protection class: IP 68-Dimensions: 39/120 mm-Own weight: 0.4 kg

Power supply, power supply, DIN rail power supply, switching power supply-Input: 400-500 VAC/50-60/Hz 2.2-1.8 A.-Output: 24 V 40 A-Dimensions: 170/125/H220 mm-Weight: 3.1 kg

Power supply, power supply, DIN rail power supply, switching power supply-Input: 400-500 VAC/50-60 Hz/1.4-1.1 A-Output: 24 V 20 A-Dimensions: 195/80/H175 mm-Weight: 1.8 kg

Power supply, power supply, DIN rail power supply, switching power supply-Manufacturer: EMS, Power Supply-Type: D602-Input: 115/230 V 50/60 Hz-Output: 5 V 500 mA-Dimensions: 115/100/H50 mm-Weight: 0.7 kg

Tire with rim-Tire size: 16.00 R20-Dimension: Ø 1320 mm-Weight: 246 kg

Paper drill, fabric drill, drill for paper or fabrics -projection: max. 90 mm -Rear stop is adjustable -Max. Intermediate dimension: 190 mm -Stroke drilling spindle: 45 mm -Admission drill: 16 mm -Dimensions: 1200/850/H1400 mm -Weight: approx. 50 kg