machines and plants for process engineering used for sale (7,701)

Compressor - Manufacturer: Renner GmbH Kompressoren, Germany - Model: RS-Top-5,5 - Type: Oil-injected rotary screw compressor, belt drive - Motor Power: 5.5 kW - Operating Pressure: 10 bar - Free Air Delivery at 10 bar: 0.78 m3/min - Compressed Air Connection: G 1/2 inch Compressed Air Storage Tank - Manufacturer: Airpress - Model: 200L/11B Vert - Reference: 5015 - Serial Number: 36094 - Capacity: 200 litres - Working Pressure: 11 bar - Orientation: Vertical - Construction: Powder-coated carbon steel Find more here - / Contact us at -

Manufacturer:Wille Geotechnik Type of Machine : Soil Triaxial test system Year of Manufacture: 2023 Warranty: Valid until June 2026 Load Frame - Model: Universal table-top load frame UL-50 - Maximum force: 50 kN - Spindle stroke: 100 mm - Feed rate stepless: less than 0.00001 to 60 mm/min - Integrated analogue ports: 6 - Test space height: 1000 mm - Test space width: 360 mm - Dimensions W x D x H: approx. 550 x 556 x 1728 mm - Weight: approx. 130 kg - PC interface: Fast Ethernet RJ45 - Supply voltage: 115/230 V, 50/60 Hz - Controller: Siemens industrial controller Triaxial Cell - Model: Triaxial cell with external rods, specimen diameter up to 100 mm, 2 MPa - Max. confining pressure: 2000 kPa - Max. axial load: 50 kN - Max. sample size: 100 x 200 mm diameter - Approx. dimensions: 420 x 650 mm diameter - Weight: 18 kg - Transparent polymer cylinder reinforced with carbon fibre str ...

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Wet separator KELLER, built in 2020, with piping and sep. 2 filter unit

Manufacturer: ELIOG Type: KFG-5-1400 Year of Make: 1997 Electrical connected load: 32 kVA Connected load gas: 1450 kW Temperature max. 1400°C Condition of the facility: good, has been modernized in several steps We can offer the facility completely renovated.

Manufacturer: Riedhammer Model: DRA 8/150 Year of manufacture: 2021/2022 Operating hours: 1000 h Condition: Mint Gas-heated Included: material feeder, silo, exhaust filter, chimney, water cooling system

Used decanter centrifuge made by Flottweg, type: PD10000 double-belt press with stainless steel frame. Electrically driven with infinitely variable speed control. Belt width: 1200mm. Integrated belt cleaning with high-pressure water. Brush cleaning for the upper belt. Pneumatic and infinitely variable belt mounting and adjustment. Replaceable dosing box. Main motor power: 5.5kW. Brush motor power: 1.1kW. Hourly capacity: 10,000 kg, depending on fruit type and ripeness. Weight: 1.8 tons. Electrical power supply: 400V/16A/12kW. Required air pressure: 8-10 bar.

Equipment: Heatable/coolable, Overpressure,Condition: used,Other: Manufacturer: Fryma Type: VME-12/C ,Volume: 22,Max. overpressure: 2.5,Max. permissible Operating temperature : 100,Design: upright,Stand shape: mobile on castors,Heating/cooling (filter bar): available,Volume double jacket: 3.3,Max. permissible Operating overpressure: 4.0,Year of construction: 2000,Technical documents: various documents,Type plate: Yes,Remarks: Due to transport damage, one of the engines broke off (see detailed photos) Plant could be overhauled and put into operation by a specialist company for homogenization technology at an additional cost

4.800 litre, Stock number: T4012, Litre: 4.800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Flat sloping, Tank cover: In the top, Ø 375 mm., Agitator: Yes, Agitator type: 2 pcs. 2-bladed propeller, D 650 mm., Agitator placement: From the top, Motor: 0,33 HP - 220/380 Volt, Inner diameter: Ø 1600 mm., Total height: H 3300 mm.

Manufacturer: INOX - MAURER AG,Condition: Used,Volume: 25,000,Max. max. Operating temperature : 50,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 2.600,Total height: 5.900,Wall thickness shelves: 6.9,Wall thickness cylinder: 6,Technical documents: Drawing, various documents,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Note: Manhole cover plated,Remarks: Test truck + 4 bar,Last purpose: Pharmaceutical chemistry,Material in contact with the product: V2A 1.4301 (AISI304),Material Feet: Steel,Bottom Bearings:

Stock number: SD070, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Decanter, Standing: On a frame, Dimensions: L 3216 x W 780 x H 930 mm., Total dimensioner: L 3300 x W 1650 x H 1950 mm., Motor: 18,5 kW - 400 Volt - 2940 rpm., Speed: Max 4400 rpm., G-Force: Max 3030 G, Manufacturer: Alfa Laval, Model/type: Foodec 209, Year: 2008, Other: With control cabinet

Manufacturer: Heiche Sachsen GmbH & Co. KG, Leisnig, Germany Model: HEIS05 Year of manufacture: 2003 Major refurbishment: 2013 to 2018 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 2,200 x 700 x 350 mm - Max. workpiece carrier weight: 750 kg - Coating material: Aluminium - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 15,000 x 3,000 x 4,000 mm - Number of baths: 24 - Number of dryers: 2 - Number of loading/unloading stations: 2 - Transport system: 2 carriages Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Control voltage: 24 V DC - Total installed power: 190 kW - Total fuse protection: 224 A - Pneumatic pressure: 7.5 bar - City water consumption: 150 l/h - Demineralised water consumption: 150 l/h a ...

Manufacturer: Heiche Model:HEIS01 KTL system Year of manufacture: 1982 Major overhaul: 2008 to 2013 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 1,240 x 800 x 600 mm - Max. workpiece carrier weight: 160 kg - Coating material: KTL paint (cathodic electrodeposition) - Coating thickness: 10 to 45 micrometers - Cycle time / throughput: 190 seconds per cycle (18 workpiece carriers per hour) - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 9,000 x 12,000 x 7,000 mm - Number of baths: 15 - Number of loading and unloading stations: 6 - Conveyor system: Chain conveyor by KEWESTA - Dip system: Lifting station by Klaus Sessler - Drying: Curing oven by Rippert Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Con ...

Manufacturer: Heiche Model: HEIS02 Machine type: Powder coating line Year of manufacture: 1999 / 2013 (conversion) Status: Operational / Ready for use Technical Specifications - Overall dimensions (L x W x H): approx. 24 m x 15 m x 5 m - Maximum workpiece window: 1,150 x 880 x 350 mm - Maximum load per metre: 60 kg on 2 brackets - Compatible materials: Steel, aluminium, stainless steel, zinc die-cast - Coating thickness: 40 - 200 microns - Conveyor speed / throughput: 0.3 - 3.0 m/min - Noise level: less than 85 dB(A) - Control system: Siemens S7-1500 - Operating software: ICOM (upgraded 2024) - Operating modes: Manual and automatic - Conveyor system: Chain conveyor - Number of pre-treatment baths: 8 - Automatic powder coating booth: 1 - Manual powder coating booth: 1 - Drying: Adhesive water dryer + curing oven - Loading / unloading: Manual along the chain conveyor Utilities and C ...

Condition: used,Other: Manufacturer: Vakumix Type: DHOLF GR3 Year of construction: 2003 Drive power: 31 kW Maximum pressure product: 2 bar (overpressure) Maximum temperature product: 133 C Areas of application: Mixing / homogenizing and pumping over of emulsions and pastes Documentation available,Manufacturer: VAKUMIX,Total height: 920,Total length: 1,500,Total width: 600

Equipment: Heatable/coolable, Insulation, Overpressure,Condition: used,Volume: 180.000,Max. overpressure: 1.5,Max. permissible Operating temperature : 18,Lower shelf: cone bottom,Design: hanging,Heating/cooling (filter bar): available,Volume double jacket: 1.462,0,Max. permissible Operating temperature : 20,Temperature control cylinder: half-tube coil,Insulation: available,Diameter inside: 4.100,Diameter outside: 4.500,Cylindrical height: 12.000,Total height: 17.000,Technical documents: Drawing,Manhole / dome: in the top floor,Type plate: Yes,Equipment: crane eyelets,Outlet: available,last use:

Equipment: Heatable/coolable, Insulation, Overpressure,Manufacturer: Gross Apparatebau,Condition: used,Volume: 37,800,Max. overpressure: 2.0,Max. permissible Operating temperature : 20,Lower shelf: cone bottom,Design: hanging,Stand shape: Ring,Heating/cooling (filter bar): available,Volume double jacket: 260.0,Max. permissible Operating overpressure: 1.0,Insulation: available,Overall height: 7.500,Overall width: 2.900,Manhole / dome: in the top floor,Type plate: Yes,Remarks: Cooling area: 17 m² Cargo dimensions: 7.5 x 3.0 x 3.0 m ,Last use: Beer,Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Heatable/coolable, Insulation, Overpressure,Manufacturer: Van Hool,Condition: used,Volume: 25,000,Max. overpressure: 3.0,Design: horizontal,Standing form: Frame,Heating/cooling (filter bar): available,Max. permissible Operating overpressure: 3.0,Insulation: available,Overall height: 2.900,Overall width: 2.550,Overall length: 6.060,Year of construction: 2014,Technical documentation: Acceptance certificate,Manhole / dome: on the container,Nameplate: Yes,Outlet: available,Remarks: Material, in contact with the product: 1.4402 (Aisi 316L) Frame, Fe (painted) Technical description available Diameter manhole 500 mm

Manufacturer: Fraunhofer Model: HEIS Laser 1 Year of manufacture: 2023 Status: Fully operational CE certified: Yes Technical Specifications - Supply voltage: 3 x 400 VAC / 50 Hz - Fuse protection: 3 x 50 A - Rated current: 50 A - Laser wavelength: 9 to 12 micrometers - Laser average rated power: 450 W Hardware Components Included - Beckhoff control PC - Philips monitor - Laser source OEM 45 IX - Water-air cooler and cooling water system - Scanner IntelliSCAN 20 with VarioSCAN 40 - Beam guidance system - Air conditioning system - Cooling water system - Control panel Peripheral Equipment Included - ULT extraction and filter unit - Riedel Kooling chiller unit, Find more here - / Contact us at -

Manufacturer: Baublys Model: BL5000 G30 Sy / NC303030 Year of manufacture: 2020 Status: Fully operational CE certified: Yes Laser Specifications - Laser type: CO2 laser - Average laser power: 30 W - Laser class: 4 - Wavelength: 10.6 micrometers Technical Specifications - Operating voltage: 400 V / 50 Hz - Max. power consumption: 2.8 kVA - Fuse protection: 16 A - Connection: 5-pin CEE plug - Machine dimensions: 860 x 1,493 x 1,777 mm - Machine weight: approx. 465 kg Workpiece Capacity - Max. workpiece height: 300 mm - Working table size: 550 x 375 mm - Max. workpiece weight: 75 kg Find more here - / Contact us at -

General SKU106Z375 MakeLB Bohle Ennigerloh TypeTrockenschrank TS-30 D No.601 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Specified Features - Drying oven MaterialStainless steel 1.4301 (304) Drying oven(1x) Number of compartments:1 Capacity1800 Ltr Internal width875mm Internal depth1450mm Internal height1450mm Steam heatingcheck (4 bar) Number of doors:1 With fancheck Motor1,5 KW, 220/380 Volt With rack mounted on wheels(1x) 2x 15 slots (800x530mm) Information With switchgearcheck Floorspace1,6x1,3 m Total height2,6 m Weight1100 kgDrying ovensDiscountLB BohleDryers > Drying ovensDiscountBrand > LB Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU432X1357 MakeGlatt AG TypeGHT-U-250 Machine number101.145 Year of construction1993 Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1578 Ltr. Max.temp.50 °C Specified Features - Drying oven Drying ovencheck (Hordentrockner) Max. temperature50° Capacity1578 l. Internal diameter1200 x 920 x 1430 mm Internal width1200 mm Internal depth920 mm Internal height1430 mm Steam heatingcheck Number of doors:1 With air circulationcheck With fancheck MotorSupply fan motor: 2 kW Exhaust fan motor: 3 kW Total: 5 kW (motors only) With rackscheck With rack mounted on wheelscheck With trayscheck 24 (3 x 50 x 80 cm) area 9,6 m2 With timercheck Drying ovens Tray sizes500 x 800 x 35 MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchgearcheck (as is) Floorspace1,1 x 1,8 m Total height2,2 m Weight800 kgDryin ...

General SKU249Y201 LocationBarneveld CEcheck Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure trays3.5 Bar Main Features MaterialStainless steel Volume305 Ltr. Surface1.5 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface1,5 m² Drying chamber capacity305 l Max. temperature95 °C Number of trays7 Tray sizes510 x 500 mm Distance between the trays50 mm Max. temperature95 °C With 1 doorcheck Connection for the vacuum pumpcheck With vacuum pumpcheck Leybold Motor0.55 kW (380 V, 1350 rpm) MaterialStainless steel 1.4435 (316L) Information MakeDe Lama Serial0219 TypeDLDR/V Year of construction2003 With switchgearcheck (as is) Floorspace1,60 x 1,05 m Total height2,00 m Extra SpecificationsWith tray holder and trolley, touchscreen controlNew arrivalsTray dryersDe Lam ...

General SKU411T126 LocationBarneveld CEcheck MakeClextral Framatome Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwcheck clextral C0 Number of temperature controllers:8 MaterialStainless steel 1.4306 (304L) Information TypeEV 32 Mach.No.B 101 Year of construction2000 With switchgearcheck(as is) Floorspace4,3x1,42 m Total height3.26 Weight3460 kg Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...