subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible.
General SKU426X1426 LocationBarneveld CEcheck MakeAllgaier Main Features MaterialStainless steel Surface2.3 m2 Sizes diameter1720 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,3 m² Number of sieve decks:3 Sieve sizesø 1720 mm With covercheck Inletø 300 mm Outletø 200 mm Drive vibro motorcheck Motor3,0 kW, 400/690 V, 1415 rpm, (Ex) Sieve perforation10 mm, 5 mm, 3 mm With ball cleaningcheck With extra sieve decks8 mm, 3 mm, 1 mm Tumbler screening machines MaterialStainless steel 1.4305 (303), Stainless steel 1.4571 (316Ti) Information Serial5795 TypeTSI 172 Year of construction2004 Year of construction2004 Mounted on mild steel framecheck With switchcheck Floor space2,10 x 2,00 m Total height1,80 mNew arrivalsTumbler screening machinesAllgaierNew arrivalsSieves > Tumbler screening machinesBrand > Allgaier What you can expect f ...
Air flow rate: 4.22m³/min, max. operating pressure: 12.8bar, motor power: 22kW, weight: approx. 560kg, operating hours: over 61000h. Documentation available. An on-site inspection is possible.
A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.
General SKU312X490 LocationBarneveld CEcheck MakeGörgens Mahltechnik GmbH Dormagen Main Features Motor110 KW Width1000 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4301 (304) Fine Impact Mills Turbo millcheck Rotor sizeø 1300 x 680 mm Grinding room sizeø 1580 x 1000 mm Inlet1000 x 150 mm Motorcheck 110 kW 400 V Speed 1100—1700 rpm Information TypeG-130 No.247 Year of construction2001 With control cabinetcheck (as is) Floor space2,68 x 1,84 m Total height2,08 mNew arrivalsFine Impact MillsGörgens Mahltechnik GmbH DormagenNew arrivalsMills > Fine Impact MillsBrand > Görgens Mahltechnik GmbH Dormagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...
General SKU201T016 LocationBarneveld Main Features MaterialStainless steel Motor0.18 KW Length300 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length300 mm Sizes stirring headØ90x10 mm Number of stirrers on shaft1 Motor0.18 kW 220/380 (Ex) With variable speed driveNeuweg Variducer Speed mixing shaft0-10 rpm Mounted on supportcheck Adjustable heightcheck Information MakeUnknown, manufacturer plate is missing Floorspace0,7x0,5 m9 Total height1,1 m Weight80 Kg ATEX compatiblecheckStirrers-Mixers > StirrersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.
General SKU397X1162 MakeDe Dietrich LocationBarneveld CEcheck TypeAE1600 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1600 Ltr. Motor5.5 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity1600 l. (2316 l.) Vessel sizesø 1400 x 1800 mm ManholeDN350/450 Top connectionscheck OutletDN100 With jacketcheck Max. temperature—10 / 200 °C With anchor stirrercheck Motor5,5 kW 400 V, 1500 rpm (Ex) Speed mixing shaft40 rpm Information No.54544 / 75109 Year of construction1984 Floorspace1,9 x 1,9 m Total height2 m Weight4500 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...
General SKU016A149 Makeunknown, manufacturer plate is missing LocationBarneveld Material Housing materialStainless steel 1.4301 (304) Main Features Inlet diameter220 mm Width440 mm Specified Features - Lump breaker Lump breaker(1x) Rotor sizesdia. 220x450mm Material Rotor CuNi 90/10 Inletdia. 350mm, Inlet flange dia. 505mm Information Extra SpecificationsMaterial Rotor CuNi 90/10 Without motor : Lump breakersDiscount-Breakers > Lump breakersDiscountBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU290S401 Makeunknown, manufacturer plate is missing Mounted on legscheck Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacityca. 500 ltr Vessel sizesdia. 1100x650mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connectionsdia. 32mm(1x), dia. 40mm (1x), dia. 170mm (1x) Outletdia. 50mm With jacketcheck Information LocationBarneveld Floorspace1,4x1,4 M Total height1,8 M Weight400 kgVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU271M389 MakeOnbekend, typeplaat ontbreekt Mounted on framecheck Main Features MaterialStainless steel Specified Features - Coating pan Coating pan(1x) Batch size±130 KG Pan diameterdia. 1200mm Pan depth650mm In-/Outletdia. 700mm Motor1,5 KW, 220/380 Volt MaterialStainless steel Information LocationBarneveld Floorspace1,7x1,3 M Total height1,9 M Weight400 KGCoating pans-Coating pans > Coating pansBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU262M322 Makeunknown, manufacturer plate is missing Mounted on legs(verrijdbaar) Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Vertical tank MaterialStainless steel Open vertical tank(1x) Capacity300 Ltr. Vessel sizesdia. 785x610mm With covercheck Flat bottomcheck Top connectionsdia. 30mm Outletdia. 70mm With jacketcheck Information LocationBarneveld Floorspace1,1x1,1 M Total height0,9 M Weight350 KGVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU004Y029 MakeSeitz TypeEF 100/500 CW No.8402 Year of construction1969 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.8 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,75 m² Capacity580 l Plate sizesø 980 mm Top connectionscheck Liquid outletDN50 With jacketcheck Max. temperature165°C MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld Floorspace1,5x1,5 M Total height2,1 MDiscountNutsche filtersSeitz - WerkeDiscountFilters > Nutsche filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...
General SKU397X1098 LocationBarneveld CEcheck MakeDe Dietrich TypeBE—1600—1400 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume1600 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity1600 l. (max 2310 l.) Vessel sizesø 1400 x 1765 mm Dished bottomcheck Dished top sidecheck Top connectionsDN50 — DN200 OutletDN100 With jacketcheck Max. temperature200 °C With propellor stirrercheck Motor4 kW (400 V, 1800 rpm (Ex)) Speed mixing shaft23 — 117 Rpm Information No.69303 Year of construction2008 Mounted on legscheck Floorspace1,68 x 1,68 m Total height3,8 m Weight3160 kg Extra SpecificationsATEX Design Information The equipment has been :designed in accordance with Directive 94/9/EC ( ...
General SKU397X1157 MakeNiro-Aeromatic LocationBarneveld TypeT6 Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m³/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information No.879012.1 Year of construction1986 Extra Specifications Heating capacity: 208.3 kW Steam overpressure: 4 bar Max. allowable operating overpressure: 6 bar Test overpressure: 7.8 bar Max. steam consumption: 356 kg/h Average steam consumption: 190 kg/h Fluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromatic What you can expect from Foe ...
General SKU397X1155 MakeNiro-Aeromatic LocationBarneveld TypeT6 Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m3/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information No.929057 Year of construction1992 With switchgearcheck Extra Specifications Heating capacity: :208.3 kW Steam overpressure: :4 bar Max. allowable operating overpressure: :6 bar Test overpressure: :7.8 bar Max. steam consumption: :356 kg/h Average steam consumption: :190 kg/hFluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromati ...
General SKU217X098 LocationBarneveld Main Features MaterialGlass Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangers Capacity22 l. Information MakeBüchi Mach.No.27692 Year of construction2000 Floor space0,50x0,65 m Total height2,10 m Weight100 kg Extra SpecificationsWork pressure -1/+0,5 bar, work temperature-50°C/+200°C, in and output, : Shell and tube heat exchangersBüchiHeat exchangers > Shell and tube heat exchangersBrand > Büchi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Stock number: PT1571, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump, Construction: On a stainless foundation, Motor: 2,2 kW - 220/380 Volt - 248 rpm., Theoretical capacity: 3800 l/h., Working pressure : Max 8 bar, Dimensions inlet: 40 mm., Dimensions outlet: 40 mm., Manufacturer: Fristam, Type: FLFN 75S, Other: Horizontal throughput
Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia, Additional title: Refrigerant: Ammonia, Cooling capacity: 70 kW, Design to: -8 °C, Design tc: 27 °C, Power: 15 kW, Operation / Control: Control cabinet with hardware control, Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet
Additional title: vertical stainless steel tank, Capacity: 100 m3, Material: Stainless steel, Position: Vertical
Additional title: vertical stainless steel tank, Capacity: 100 m3, Material: Stainless steel, Position: Vertical
General SKU123X722 MakePannevis TypeRT/PT 0,25 x 2 mtr No.1645 Year of construction1994 LocationBarneveld Dimensions Filter width25 cm Filter length200 cm Main Features MaterialStainless steel Motor0.25 KW Surface0.5 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck in pressure tight housing Filter surface0,5 m² Filter width250 mm Filter length2000 mm Number of sections:4 (3x 400 mm + 1x 800mm) With motor0,25 kW (400 V, (Ex)) With variable speed drivecheck Belt speed± 15-85 m/h Knife dischargecheck With vacuum pumpmake SIHI With liquid pumpcheck MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Dim. 1,4x0,5x2,2 m Floorspacefilter 4,0 x 2,1 m Total height2,7 m Weight8000 kg ATEX compatiblecheck Extra Specifications- Housing vac/6 bar, - Test pressure 11,7 bar DiscountVacuum belt filtersPannevisDiscountFilters > Vac ...
Station for preparing flocculation aids.
Additional title: Sludge tank, Capacity: 70 m³, Length: appr. 3,8 m, Width: appr. 3,8 m, Material: Stainless steel, Position: Vertical, Features: Outlet pump 2,2 kW, (flow rate 19m3/h); Agitator
Sewage sludge tank made of stainless steel, with insulation, agitator and side tapping., Additional title: Stainless steel tank with insulation, Capacity: 100000 l, Operating temperature: 80 °C, Material: Stainless steel, Position: Standing on concrete foundation, Base construction: Cylindrical tank with flat bottom, Features: Insulation with stainless steel cladding, feed pump (volume flow 12m3/h); agitator, ladder with back protection, tank top railing,
Decanter centrifuge for thickening municipal, industrial and biological sludge, Additional title: Sludge dewatering system, Capacity: 15 m3/h, Weight: 640 kg, Position: To be mounted on the customers substructure, Features: Operating platform
Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: Product, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439
Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you., Material: Pump housing and impeller in stainless steel, Position: free standing/mounted on base, Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter
Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...
horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg
Innovac GmbH
