Manufacturer:
(Category: 904)
Drilling length 1000mm; drill diameter 200mm; tank capacity 1050ml; engine speed 8500rpm; 1.45KW; 2 stroke; 52cc; 6170 Auction-ID: A1-51257-432
Chipping Capacity 89mm ; Blade Speed 2400rpm; Engine Type OHV 4-stroke; Starting System recoil; Displacement 420cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; DUCAR engine; 6778 Auction-ID: A1-51257-494
3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; Auction-ID: A1-51257-501
Power 1.45kw; 2 stroke; 52cc; tank capacity 1200ml; Max 9500 rpm; shaft thickness 1.5mm; shaft diameter 26mm; 3T blade; nylon trimmer; trimmer head; easy starter; belt; 10\" pole saw, chain and bar; Auction-ID: A1-51257-433
Lot of 7 rakes 14 teeth with wooden handle – NewLot composed of 7 new rakes with 14 teeth with wooden handle. Slightly chipped paint on some rakes. Important information – to read before biddingGoods from discontinued series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weight are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-19
Device starts, but no water flow, defective Auction-ID: A1-51205-4
Kubota G23 Ride-on mower with high discharge and grass collector (Used machine) • Manufacturer: Kubota • Type: G23 • Year of manufacture: 2009 • Serial No.: G23-11271 • Motor power according to nameplate: 17.1 kW • Net weight: approx. 550 kg • Version: Ride-on mower / municipal mower • Open driver's platform • Hydrostatic drive • Power steering • Front weights mounted Mower: • Undermount mower deck • Kubota mower deck type RCK48-G23 • Mower year built: 2009 • Cutting width: approx. 1.20 m / 48 inches • Lateral guide / tactile rollers • Mechanically adjustable cutting height Grass pick-up / high emptying: • Grass collector at the rear • Hydraulic high discharge • Grass collector can be lifted hydraulically • Hydraulically operated emptying • Large-volume grass collector with protective grille • Emptying possible in an elevated position Eq ...
2017 Kubota GR1600-II Diesel Riding Mower – 23.2 hours of operation – 107 cm cutting width – 370 litres of grass collection Specifications: Brand: Kubota Type: GR1600-II Year of construction: 2017 Serial Number: 68958 Hours: 23.2 hours Condition: as good as new Engine: Kubota Z482 Engine version: 2-cylinder liquid-cooled diesel engine Cylinder capacity: 479 cm³ Engine power: approx. 10.1 kW / 13.5 hp Maximum engine speed: approx. 3,300–3,400 rpm Fuel tank: approx. 18 litres Transmission: hydrostatic / HST Forward travel speed: approx. 0–10 km/h Reverse travel speed: approx. 0–5 km/h Transmission drive: cardan shaft Cutting deck: Kubota GR1600-42G-EU2 Mower deck serial number: 38839 Cutting width: approx. 1,067 mm / 107 cm / 42 inches Cutting height: approx. 25–102 mm Number of cutting height positions: 11 Mower deck drive: cardan shaft / U-joint shaft PTO coupling: mecha ...
Trailed leaf vacuum, PTO driven, including control box, working width 1800mm, collection container with tipper loose system, Auction-ID: A1-47396-1602
Manufacturer: NIDO-UNIVERSAL MACHINES B.V. Type: ROB/2-8 EPZ Year: 1982 Serial no.: 342 Country of manufacture: Netherlands Equipment: Electro-hydraulic snow plough blade Working width: approx. 2,8 m Operation: Electro-hydraulic Features: Curved steel snow plough blade Hydraulic blade positioning Integrated electro-hydraulic power unit Hydraulic cylinders Heavy-duty mounting frame Lower rubber cutting/scraping edge Marker poles Electrical and hydraulic connections as pictured Application: Snow clearing / winter road maintenance Condition: Used Visible signs of wear, paint loss and surface corrosion consistent with age and use Functional condition has not been verified Remarks: Compatibility with the intended carrier vehicle must be verified by the buyer. Auction-ID: A1-50932-139
Salt bunker Capacity 1.5m3 brine tank capacity 380L Drive: Hydraulically driven conveyor belt and spreading disc (drive hydraulics by front wheels) Version: Trailed spreader on tandem trailer (ESVE AWK 2500) equipped with work lighting works properly Auction-ID: A1-47396-255
Unused Salf mower Cutting width variable from 100 to 170 cm PTO speed 540 rpm Mowing speed 4 - 11 km/h Drive mowing blades by heavy angle transmission Required power 20-25Hp complete with: Fixed 3-point mounting / Front wheels and roller rear adjustable in height / Counter-rotating swivel blades / Hydraulic cylinder for opening the swivel mowers / PTO with freewheel and shear bolt protection / Mower is in accordance with \"CE\" standards Auction-ID: A1-47396-2408
Equipped with 5 hydraulically driven reel mowers equipped with Mitsubishi 4-cylinder diesel engine with approximately 40Hp readable hours 3950 hours 4WD drive Auction-ID: A1-47396-254
Equipment: Rotary snow blower attachment Type: Heavy-duty front-mounted snow blower Manufacturer: Unknown / not identified Configuration: Front snow intake housing with rotary impeller High-discharge snow chute Rotatable discharge chute Hydraulic chute adjustment Heavy-duty steel mounting frame Hydraulic cylinder and hoses Mechanical drive components Application: Snow removal / winter road maintenance Mounting: Front-mounted attachment; carrier vehicle not included Condition: Used condition with signs of intensive use Paint wear, surface corrosion and oxidation visible Wear visible on housing, frame and mechanical components Hydraulic hoses and couplings present as pictured Functional condition has not been verified Remarks: Compatibility with the intended carrier vehicle must be verified by the buyer. Sold as pictured. Auction-ID: A1-50932-93
Equipment: Snow plough blade Type: Electro-hydraulic snow plough Working width: approx. 2,500 mm Control system: MEYER Electro-Touch Snow Plow Control Operation: Electro-hydraulic Equipment: Heavy-duty curved steel snow blade Hydraulic lifting and blade positioning system MEYER electro-hydraulic power unit Multiple trip/protection springs Adjustable support wheels Replaceable lower cutting edge Rubber upper deflector Heavy-duty mounting frame Hydraulic/electrical connections as pictured Application: Snow clearing / winter road maintenance Condition: Used Signs of wear, paint loss and surface corrosion visible Functional condition has not been verified Remarks: Compatibility with the intended carrier vehicle must be verified by the buyer. Carrier vehicle not included. Sold as pictured. Auction-ID: A1-50932-94
Equipped with: braked trailer with license plate, side can open, start and run, for cleaning work Auction-ID: A1-47396-1706
Manufacturer: NIDO – Universal Machines B.V. Type: K 2.0 EPZ Year: 1988 Serial no.: 637 Equipment: Snow plough blade Construction: Heavy-duty steel Mounting: Front mounting frame included Adjustment: Adjustable blade angle Cutting edge: Replaceable segmented lower wear edge Included: Snow plough blade Mounting / coupling frame as pictured Upper snow deflector / cover Condition: Used, with significant signs of age and use Surface corrosion and paint wear visible Condition and completeness as shown in the photographs Remarks: Compatibility with the intended carrier vehicle should be verified by the buyer before purchase. Auction-ID: A1-50932-92
Manufacturer: Giletta Model: LA40 Type: Hydraulic Snow Plough Year: 2007 Serial number: LA798GG70R Empty weight: 740 kg Equipment: Hydraulic snow plough blade Hydraulic blade angle adjustment Multi-section blade with impact protection system Spring-loaded lower blade sections Replaceable cutting edge Hydraulic cylinders Vehicle mounting frame Hydraulic hoses and connections Electrical control / connection box High-visibility marker poles Warning lights Application: Professional winter road maintenance and snow removal. Condition: Used equipment with visible signs of use, paint wear and surface corrosion consistent with age. Condition as shown in the photographs. Auction-ID: A1-50932-46
Type: Heavy-Duty Rotary Snow Blower / Snow Cutter Application: Unimog and trucks Working width: approx. 3,500 mm Equipment: Twin-auger snow intake system Heavy-duty steel housing Large rotary impeller / blower assembly Snow discharge chute Hydraulic connections Heavy-duty mounting frame Application: Designed for professional heavy snow removal and road clearing Suitable for mounting on Unimog and compatible heavy-duty trucks Twin-auger system for collecting and feeding snow into the blower Discharge chute for controlled snow ejection Condition: Used, with visible signs of use, paint wear and surface corrosion Working width approx. 3.5 m Manufacturer, model and year not available Condition and configuration as shown in the photographs Auction-ID: A1-50932-80
Equipment: Hydraulic snow plough / dozer blade Working width: approx. 2,000 mm Material: Steel Features: Heavy-duty curved steel blade Hydraulic operation Adjustable / angling blade mechanism Steel mounting frame Replaceable lower cutting / wear edge Reinforced blade construction Application: Snow clearing, material pushing and general-purpose clearing operations Designed for mounting on compatible construction or municipal machinery Condition: Used, with visible signs of use, surface corrosion and paint wear Condition and configuration as shown in the photographs Auction-ID: A1-50932-83
Equipped with 420 cc 12.4 HP petrol engine 1 cylinder Electric start unused Auction-ID: A1-47396-1148
Features: Cutting deck Sweeping deck/Extra filter insert Hydrostatic drive Hydraulic tipping PTO drive Auction-ID: A1-47396-853
Year: 2014Manufacturer: KÄRCHERModel: HD 1050 BSerial No.: 011954Power: 9.5 kWFlow rate: 13 l/minOperating pressure: 230 barMax. pressure: 250 barMax. temperature: 60 °CWeight (kg): 74Equipment: Honda GX390 petrol engine, high-pressure pump with chemical dosing adjustment, high-pressure couplings, movable tubular chassis with wheels. Auction-ID: A1-51439-24
Manufacturer: NIDO Type: UNIVERSAL Equipment: Electro-hydraulic snow plough blade Working width: approx. 2,800 mm Features: Heavy-duty curved steel snow blade Electro-hydraulic operation Hydraulic blade angling via two hydraulic cylinders Hydraulic hoses and connections Mounting frame Replaceable lower cutting / wear edge Side marker poles Application: Professional snow clearing and winter road maintenance Designed for mounting on compatible municipal vehicles / trucks Condition: Used, with visible signs of use, paint wear and surface corrosion Condition and configuration as shown in the photographs Auction-ID: A1-50932-82
Equipment: Mechanical snow plough blade Working width: approx. 2,340 mm Operation: Mechanical Features: Curved steel snow plough blade Mechanical adjustable blade angle Multi-position pivot / mounting mechanism Heavy-duty steel mounting frame Replaceable lower cutting edge Rubber lower edge sections Application: Snow clearing / winter road maintenance Condition: Used Visible heavy signs of use, surface corrosion and paint loss Lower rubber cutting edge shows visible wear and damage Functional condition has not been verified Remarks: Manufacturer, model and year not identified. Compatibility with the intended carrier vehicle must be verified by the buyer. Auction-ID: A1-50932-140
150 € 
