subcategories
(3rd category level)
Manufacturer:
(Category: 701)
The bran finisher increases the flour yield during the grinding process by separating the flour from the bran. It is used for soft wheat, durum wheat and rye. It has a production capacity of up to 1.8 tons per hour, or 3.6 tons per hour if you use the double machine.
Stock# U2435-1 Used stainless steel ribbon mixer made by Consumasz (Poland) type M-01 with total volume 1100 l and working volume 850 l. Mixing chamber has internal dimensions: L 1990 mm W 830 mm x D 1175 mm. Mixer is feeded from the top via cylindrical sifter type PC-400, driven by gearbox and el motor 4 kW, 1445 rpm, 220/380 V, 50 hz, or directly through inlet 205 mm x 205 mm. Mixer has single shaft equipped with welded double ribbons. Shaft is driven via gearbox and el motor 15 kW, 1460 rpm, 380 V, 50 hz. Gearbox reduction i= 36,9. Working rotation of shaft up to 39 rpm. Mixer has side wall inspection manway with dimensions 540 mm x 365 mm, and bolted stainless steel lid. Central bottom discharge outlet has diameter 200 mm and is equipped with manually operated valve. Product is droped into the hopper of discharge screw conveyor with screw diameter 200 mm and working length 1000 m ...
Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.
Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.
Stock number: U2395-3 Used vertical stainless steel silos for powders with total volume about 6000 l. Tank has internal diameter 180 cm x length of straight side of wall 144 cm. Silos has conical bottom, equipped with vibrating discharge outlet driven by el vibrating motor and pneumatically operated valve. Diameter of discharge 200 mm. Silos had been mounted on cylindrical support. Feeding inlet via top located connection to pneumatic conveyer. Silos has side wall rectangular connection for dust filter with dimensions 570 mm x 490 mm. There is a inspection manway with bolted lid with diameter 500 mm. Last time used in food industry.
Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.
Stock number U2387-1 Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with central discharge outlet. Tank is mounted on three stainless steel legs, on tension cells. On side walls there are welded four baffles. Mixing is provided by homogenizing agitator by IKA (DE) model Turrax UTC TMP 150 / 2KT, driven directly by 11 kW, 2915 rpm, 380/660 V, 50 hz. Length of the shaft 900 mm x diameter of mixing die 150 mm. Agitator is mounted on stainless steel supporting frame. Discharge from tank is provided by sinusoidal stainless steel contact parts pump by Masosine Process Pumps model SP 25, working on pressure up to 15 bar. Working rotation up to 600 rpm. Pump is driven by 2.2 kW, 1400 rpm, 220-380 V, 50 hz. Working rotation of drive up to 2 ...
Sea SELEKTA.3 optical sorter
Plansichter Buhler MPAQ 2.10
Buhler DMWP flake mill, 1000x600, complete with electric motor
Stock# U2284 Used stainless steel paddle mixer for continous work by Gloucester Material Handling Ltd (UK) with total volume 2700 l. Internal diameter of mixing chamber 1100 mm x 2840 mm length. Top feeding inlet has dimensions: 300 mm x 300 mm. Bottom front outlet has dimensions 300 mm x 440 mm. Mixer is equipped with stainless steel mixing shaft with welded 21 paddles. Front and back walls are bolted. Front wall is equipped with mechanical sealing of shaft. Back wall has standard sealing of shaft. Mixer had been running with electric motor 55 kW, 1500 rpm - but motor is not included. Mixer is equipped with gearbox and new mechanical sealing. No control panel included. Technical drawings of mixer and shaft are included. Mixer had been running in food production with reported output about 8-12 tons per hour. Machine is mounted on 6 stainless steel legs.
Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.
Cylinder mill for very fine grinding, consisting of three pairs of cylinders, new machinery, stainless steel construction, never been used, complete with product feeder, three electric motor and hydraulic control unit
Please note; no Electric motor Auction-ID: A1-40129-332
an industrial weighing terminal (also known as a weighing indicator) of the Prior brand, part of Servo Berkel Prior. This particular model, the Prior 2341, serves as the digital readout and control panel for an industrial weighing system, such as a platform or floor scale Industrial stainless steel floor scale or pallet scale. It is specifically designed for weighing heavy loads such as pallets, drums or containers in industrial environments where hygiene and sustainability (such as in the food or chemical industry) are important. Key features: Low profile: The platform is low to the ground, often with integrated ramps, so that goods can be easily driven on it. Material: Completely made of stainless steel (SS), which makes it resistant to moisture and corrosion. Digital Indicator: The device on the left with the display and buttons is the weighing terminal (indicator), which reads t ...
3 UNITS/SETS OF GOL0002 PACKED TOGETHER. A SINGLE GOL0002 CORRESPONDS TO: Electronic Floor scale, 1200 x 1200 mm, maximum weight 3000 kg, piece counter function. Sturdy platform with reinforced structure and 4 load sensors. Very strong platform for weighing a large variety of objects. Made of waterproof epoxy painted steel and resistant to bumps and scratches. Adjustable feet to level the platform and transmit the force of the load sensors. CE certification. Machine condition: unchecked. Approx. Transport dimension: LxWxH 1200 x 1200 x 300 mm; Approx. Weight: 95kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x GOL0002 PACKED TOGETHER: 1200 x 3600 x h300 mm - 285 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43154-85
Manufacturer: RHEWA Waagenfabrik Manufacturer's location: D-402 Mettmann, Germany Type: 112 Machine type: Mechanical industrial scale / Lever or beam scale Design: Stationary scale in solid steel design Scope & Usage • Industry, workshops, warehouses and production plants • Mechanical weighing of workpieces, components, materials and assemblies • Suitable for heavy, long or bulky goods Functional principle • Purely mechanical weighing system • Weight determination via lever transmission • Compensation by counterweights on the balance beam • Display of the weight via mechanical scale or bar adjustment Structure • Solid base frame for high stability • Vertical beam with integrated lever mechanism • Upper balance beam with adjustable counterweights • Stable construction for long-term industrial use Operation • Manual setting and reading • Easy handling with ...
Delivery head approximately 2900mm. Feed hopper size approximately 1000x1000mm. Auction-ID: A1-43789-46
3 UNITS/SETS OF GOL0002 PACKED TOGETHER. A SINGLE GOL0002 CORRESPONDS TO: Electronic Floor scale, 1200 x 1200 mm, maximum weight 3000 kg, piece counter function. Sturdy platform with reinforced structure and 4 load sensors. Very strong platform for weighing a large variety of objects. Made of waterproof epoxy painted steel and resistant to bumps and scratches. Adjustable feet to level the platform and transmit the force of the load sensors. CE certification. Machine condition: unchecked. Approx. Transport dimension: LxWxH 1200 x 1200 x 300 mm; Approx. Weight: 95kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x GOL0002 PACKED TOGETHER: 1200 x 3600 x h300 mm - 285 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-44067-85
Auction-ID: A1-43755-51
Marani srl
200 € 