9314 results

similar results found in category vertical mast lifts

Category: 1516 vertical mast lifts
New in: used
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-Machine in stock -After reviewing the technical -Very good condition TECHNICAL PARAMETERS: -Max planing width 500 mm -Max height planing-double-sided 170 mm -Max height planing-four 150 mm -2 horizontal shafts 4 knife -Spindle diameter vertical fi 40 -3 upper shafts extending -3 lower shafts extending -Rollers in the countertop, adjustable -ADJUSTABLE TABLE TOP-DOWN-ELECTRIC -ELECTRIC SPINDLE SPACING VERTICAL RIGHT – The upper shaft-motor 7.5 KW – Lower the shaft-motor 5.5 KW -S ...

Category: 1516 vertical mast lifts
New in: used
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -year of manufacture 1995 TECHNICAL PARAMETERS: -planing height 160 mm -planing width 230 mm -six heads -spindle 50 mm – horizontal heads on podtrzymkach The layout of the heads: 1) horizontal head lower 18.5 kW 2) vertical head right 7.5 kW 3) vertical head left 11 kW 4) horizontal head upper 18.5 kW 5) horizontal head lower 11 kW 6) horizontal head upper 7.5 kW -hydraulic feed -6-60 feed speed m/min – the jointe ...

Category: 1516 vertical mast lifts
New in: used
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

In good technical condition. Table clamping surface: 400 x 630 mm Table load capacity: 125 kg Axis supply routes: X: 400 mm Y: 250 mm Vertical spindle stroke: 420 mm Spindle stroke: 100 mm Spindle diameter: 80 mm Spindle speed: 45-2800 RPM. Power consumption: 2,4 kW Machine weight: 2300 kg

Category: 1516 vertical mast lifts
New in: 1990
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Control: Linux Table size: 770 Ã? 220 mm Maximum workpiece weight: 150 kg Longitudinal feed (X): 300 mm Vertical feed (Z): 210 mm Cross feed (Y): 217 mm Spindle speed: 10,000 rpm Machine weight 1300 kg

Category: 1516 vertical mast lifts
New in: 2007
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

General overhaul in 2007. Bumper height: 160 mm Table diameter: 320 mm Vertical table movement: 270 mm Cross table movement: 320 mm Longitudinal movement of table: 200 mm Distance between cutter and stand: 265 mm Maximum distance between knives and clamping table: 280 mm Number of double strokes per minute: 71-112-180 Max power: 350 kg Feeds: longitudinally and transversely in the range: 0-0.6 mm Electromotive drive: 1400 rpm, 1.5 kW Machine dimensions: 930 x 1200 mm Machine weight with standard access ...

Category: 1516 vertical mast lifts
New in: 1998
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

In gutem technischen Zustand und voll funktionsfähig. Produktionsjahr 1998. Steuersystem: MAHO CNC 532. Spindel: ISO 40. Tischspannfläche: 900 X 600 mm. Achsen: X 600 mm, Y 550 mm, Z 400 mm

Category: 1516 vertical mast lifts
New in: 1998
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

In good technical condition and fully functional. Production in 1998. Control system: MAHO CNC 532. Spindle: ISO 40. Table clamping surface: 900 x 600 mm. Axes: X 600 mm, Y 550 mm, Z 400 mm

Category: 1516 vertical mast lifts
New in: 1976
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

n good technical condition. Maximum drilling diameter: 50 mm Maximum boring diameter: 200 mm Distance of the axis to the leadership: 320-1600 mm Spindle distance from Base: 345-1530 mm Vertical arm adjustment: 875 mm Machine dimensions: 2960 x 1120 x 2450 mm Weight approx. 3,700 kg

Category: 1516 vertical mast lifts
New in: 2007
Location: Land-de DE 71263 Weil der Stadt, Bachstr. 6
Seller: Altmann Graphische Maschinen GmbH

max. Format 53 x 74 cm Wendung: 8/0 - 4/4 Baujahr 2007 Prinect Press Center Prinect Inpress Control Instant Gate Color Asisstant ALCOLOR Vario Filmfeuchtwerke Farbwerktemperierung Kühlgerät CombiStar (wassergekühlt) einschl. Alcosmart AUTOPLATE automatische Wascheinrichtungen PRESET InkLine 3000 Entelektrisiereinrichtung StaticStar Trockenbestäuber PowderStar AP 262 dynamische Bogenbremse Luftversorgungsschrank AirStar (wassergekühlt) RSP Inline Finishing System wassergekühlte Maschine - oh ...

Category: 1516 vertical mast lifts
New in: 2007
Location: Land-de DE 71263 Weil der Stadt, Bachstr. 6
Seller: Altmann Graphische Maschinen GmbH

Heidelberg SPEEDMASTER CD 74-8 P5 - C - InpressControl max. size 53 x 74 cm perfecting: 8/0 - 4/4 age 2007 Prinect Press Center Prinect Inpress Control Instant Gate Color Assistant ALCOLOR Vario film dampenings ink unit temperature control cooling unit CombiStar (water-cooled) incl. Alcosmart AUTOPLATE automatic washing devices PRESET InkLine 3000 antistatic device StaticStar dry sprayer PowderStar AP 262 dynamic sheet brake air supply cabinet AirStar (water-cooled) RSP Inline Finishing System  ...

Category: 1516 vertical mast lifts
New in: 2006
Location: Land-de DE 65197 Wiesbaden, Flachstr. 11
Seller: Kurt Steiger Werkzeugmaschinen GmbH

Table size: 260 x 1120 mm table movement x 650 mm table movement y: 250 mm table movement z: 380 mm spindle retainer: ISO 40 spindle speeds: horizontal / vertical spindle 40 - 1300/90-2000 rpm Quill stroke: 120 mm spindle drive: 2,2 kW

Category: 1516 vertical mast lifts
New in: 2003
Location: Land-it IT 10036 Leinì, Via Carrera, 9
Seller: Tecnoffset S.r.l.

EASYPLATE MANUAL PRESET ALCOLOR DAMPENING BALDWIN COOLING AUTOMATIC ROLLER WASHER POWDER SPRAYER ONLY 10 MIO. IMPRESSION

Category: 1516 vertical mast lifts
New in: 2003
Location: Land-it IT 10036 Leinì, Via Carrera, 9
Seller: Tecnoffset S.r.l.

EASYPLATEMANUAL PRESETALCOLOR DAMPENINGBALDWIN COOLINGAUTOMATIC WASHERPOWDER SPRAYERONLY 10 mein ROLLER. EINDRUCK

Category: 1516 vertical mast lifts
New in: 2005
Price 1 €
Location: Land-fr FR 93100
Seller: sasu zotoff

4 RECTIVAR RTV 84D72Q 16 ATV 71. 37 KW 50HP 13 ATV 71. 30KW 40HP 4 SIMORE DE MASTER SIEMEN 4 EUROTHERME ALT 690 19 EUROTHERME ALT 590 8 VARIATEUR DCS 800 20 VARIATEUR ABB

Category: 1516 vertical mast lifts
New in: used
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0546Brand: MASTERWOODModel: Projekt 500 - CE-Norm CNC Bearbeitungszentrum mit 4 gesteuerten Achsen mit automatischer Tabellen für die Bearbeitung von Möbel, Paneele, festen Holz, Holz, zusammengesetzte Materialien und Kunststoffen - CE-Norm - Jahr 2008\ RNumerical Kontrolle Arbeitstisch: automatische Konfiguration der Arbeit planen durch Regale und Trolleys mit unabhängigen MotorizationStroke Achse X - Y - z: 4090 - 2070-305 MmMax Bewegung Geschwindigkeit Achsen X - Y - z: 100 - 50-25 Mt/MinWorking Bereich ...

Category: 1516 vertical mast lifts
New in: used
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0546 Brand: MASTERWOOD Model: PROJECT 500 - Norme CE CNC working center with 4 controlled axis with automatic tables for working of furniture, panels, solid wood, wood, composite materials, and plastic materials - CE Standard - Year 2008 Numerical control worktable: automatic configuration of the work plan by means of shelves and trolleys with independent motorization Stroke axis X - Y - Z: 4090 - 2070 - 305 mm Max movement speed axis X - Y - Z: 100 - 50 - 25 mt/min Working range workpiec ...

Category: 1516 vertical mast lifts
New in: 1982
Location: Land-it IT 44100 Ferrara, Piazzetta Schiatti n. 8
Seller: STOCKEUROSTOCK SRL

MECOF CS NC mobile column milling machine construction year 1982 equipped with Heidenhain TNC530 control (retrofit 2008) Main technical features: - Table 1235 x 8000 mm Axle travel: - longitudinal of the upright (X axis) 6000 mm milling - transverse of the head (Y axis) 1000 mm - vertical of the head (Z axis) 2000 mm Spindle: - engine power C.C. 25 HP - ALTER type drive. 02/213 - ISO 50 cone Installed power 40 kW Rated current 65 A

Category: 1516 vertical mast lifts
New in: 2000
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Vertikales Bearbeitungszentrum Steuerungssystem: Heidenhain TNC 430 Spannfläche des Tisches: 850 x 600 mm Verfahrweg X-Achse: 650 mm Verfahrweg Y-Achse: 500 mm Verfahrweg Z-Achse: 500 mm Spindeldrehzahl: 1 - 8000/min. Anzahl der angetriebenen Achsen: 3 Spindelkegel: SK 40 Hauptmotorleistung: 10 kW Anzahl der Positionen im Magazin: 30 Maschinenabmessungen (L x B x H): 4100 x 3900 x 2900 mm Maschinengewicht: 10.500 kg

Category: 1516 vertical mast lifts
New in: 2000
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Vertical machining centre Control: HEIDENHAIN TNC 430 The table clamping area: 850 x 600 mm Traverse path X-axis: 650 mm Stroke y axis: 500 mm Z axis travel: 500 mm Spindle speed: 1-8000 / min. Number of driven axles: 3 Spindle taper: SK 40 Main engine output: 10 kW Number of positions in the magazine: 30 Machine dimensions (L x W x H): 4100 x 3900 x 2900 mm Machine weight: 10,500 kg

Category: 1516 vertical mast lifts
New in: 1977
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Vertical lathe - carousel with dimensions Digital measurement Dimensions (L x W x H): 2875 x 2660 x 4100 mm Clamping table diameter: 1120 mm Machine weight: 16.500 kg

Category: 1516 vertical mast lifts
New in: used
PriceVB 1.900 €
Location: Land-de DE 08064 Zwickau, Hüttelsgrüner Ring 13
Seller: Möckel Baumaschinen & DL GmbH

Rasenmäher Toro Reelmaster 216-D 3 WD Antrieb – Minneapolis USA Gebraucht, aber gut. Dieser Mäher wurde während der Vegetationsperioden regelmäßig ca. 5 Jahre zum Mähen verwendet. Seit über 8 Jahren war das Gerät wegen Neuanschaffung nicht mehr in Betrieb. Es wird mit drei 8 Klingenschneideinheiten geliefert, hat den ursprünglichen Perkins 4-Takt, 3 Zylinder flüssigkeitsgekühlten Dieselmotor. Es verfügt über zwei hydraulische Radmotoren und ist ein "3-Rad Antrieb". Toro Rasenmäher sind  ...

Category: 1516 vertical mast lifts
New in: 2005
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

HSM vertical baling press, type V-Press 1160 ECO plus, press power ca. 54 t, motor power 7,5 kW, constructed in 2005 Technical specifications Manufacturer HSM GmbH & Co. KG Type V-Press 1160 ECO Plus Year of construction 2005 Operation houers 8 h Press power approx. 54 t Motor power 7,5 kW Loading aperture 1195 x 650 mm Bale weights Up to 550 kg (depending on material) Max. bale size 1200 x 1100 x 1200 mm (L x W x H) Hourly output in bales 1-2 Press chamber size 1195 x 1100 x 1640 mm (W x D x H) Machi ...

Category: 1516 vertical mast lifts
New in: 1974
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Clamp diameter: 2500 mm Maximum turning diameter: 2600 mm Maximum workpiece height: 1700 mm Main motor power: 55 kW Machine equipment: -Vices for clamping work pieces: 4 pieces -Heads are equipped with a H-tool holder -mechanical and electrical documentation -Tool cooling -Digital measurement

Category: 1516 vertical mast lifts
New in: 1978
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Clamp diameter: 2000 mm Maximum turning diameter: 2200 mm Maximum workpiece height: 1200 mm Main motor power: 55 kW Machine equipment: -Vices for clamping work pieces: 4 pieces -Heads are equipped with a H-tool holder -mechanical and electrical documentation -Tool cooling -Digital measurement Newall

Category: 1516 vertical mast lifts
New in: 2011
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

CNC Vertikal-Fräsmaschine Die Fräsmaschine ist in einem sehr guten technischen Zustand. Steuerungssystem: SIEMENS 802D Max. Werkstückgewicht: 200 kg Tischgröße: 254 x 1000 mm Arbeitshübe: X: 650 mm Y: 390 mm Z: 400 mm

Category: 1516 vertical mast lifts
New in: 2011
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

CNC vertical milling machine The milling machine is in a very good technical condition. Control system: SIEMENS 802D Maximum workpiece weight: 200 kg Table size: 254 x 1000 mm Working strokes: X 650 mm Y: 390 mm Z: 400 mm

Category: 1516 vertical mast lifts
New in: 2019
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904983 Number: 1 PCs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 21i-T Year of construction: 2002 (2019) Condition: Remanufactured engine DESCRIPTION TURNING Maximum swing over bed cover 210 mm Maximum Chuck diameter 170 mm Max speed main spindle 1/min 7500 Maximum performance main spindle in ED 10-40 / 100% 25/16 kW Maximum torque of main spindle in ED 10-40 / 100% 134/85 Nm Spindle diameter in front bearing spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55 ...

Category: 1516 vertical mast lifts
New in: 2008
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

CNC Portal milling machine Table stroke (X-axis): 2250 mm Stroke (y): 3800 mm Vertical cross spindle (W axis): 1250 mm Distance between the stands: 2500 mm Headstock with preparation for interchangeable spindle heads: Spindle speed: 500 rpm Engine power: 100 kW Torque: 4000 NM Spindle taper: ISO 60 CE 2000 x 2000 mm work table: Linear axis stroke: 2250 mm Height from the ground: 1000 mm KLEMM-T-slots: -Number: 9 -Scale: 200 mm -Groove width: 28 mm H11 Centering hole: 100 mm H7 Maximum load: 20000  ...

Category: 1516 vertical mast lifts
New in: 2008
Location: Land-at AT 2512 Tribuswinkel, Sängerhofgasse 42
Seller: Lovric Maschinenhandel e.U.

Angebot/Offer: Battenfeld Vertical VR 150/750 round table 1520mm Screw 40mm 3x core pull 8x hot runner year 2008 etc

Category: 1516 vertical mast lifts
New in: 2008
Location: Land-at AT 2512 Tribuswinkel, Sängerhofgasse 42
Seller: Lovric Maschinenhandel e.U.

Offer/offer: Battenfeld vertical VR 150/750 round table 1520mm Screw 40mm 3 x pull core 8 x hot runner year 2008 etc...

Category: 1516 vertical mast lifts
New in: used
Location: Land-bg BG
Seller: PROFIT Machinery Point Ltd

Lager Nr. 13121Manufacturer Mori SeikiModel SV 500 B / 40 (5 Achsen Machione, 3 + 2)Y.O.M. 10/1998Condition sehr gut 150-660 MmTable 1320 X 600 MmSpindle Drehung 10.000 RpmTool keine Problema 100 % in ProductionCNC Steuerung MSC 516 (Fanuc 16) X Achse 1000 MmY Achse 510 MmZ Achse 510 MmVertical Layout Geben Sie MAS BT 40 / 40Tool Speicher 20 ToolsIncludes Kat: 2 Achse Nikken Einheit - Dreh- und kippbare

Category: 1516 vertical mast lifts
New in: used
Location: Land-bg BG
Seller: PROFIT Machinery Point Ltd

Stock Nr 13121 Manufacturer Mori Seiki Model SV 500 B / 40 (5 Axis machione, 3 + 2) Y.O.M. 10/1998 Condition Very Good no problema 100% in production CNC Control MSC 516 (Fanuc 16) X axis 1000 mm Y axis 510 mm Z axis 510 mm Vertical Lay out 150 - 660 mm Table 1320 X 600 mm Spindle rotation 10.000 rpm Tool type MAS BT 40 / CAT 40 Tool storage 20 tools Includes : 2 Axis Nikken Unit - Rotating and tilting

Category: 1516 vertical mast lifts
New in: 2000
Price 118.000 €
Location: Land-dz DZ 09000 BLIDA, CHERIF CHALABI 107
Seller: LPFC SRL

Salam We sale a isobaric PET filler BC TRIBLOC 40/50/8 In verry good condition, for soft drink year 2000, 40 rinser , 50 filler , 8 capper arol. for PET bottles PCO 1810 (pco col 28mm) with format 0.33 litre,1 litre, 1.5 litre, 2 litre. can be see in production.

Category: 1516 vertical mast lifts
New in: used
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0544Brand: PUTSCH MENICONIModel: SVP 145 - CE-Norm Manual vertikale Panel Säge für Holzplatten, Kunststoffe, Verbundwerkstoffe, Alu - CE-Norm - Jahr 2011Horizontal und vertikale Panel Cuttings\ nRetractable Rollen, dem Gremium, Schiebetüren, Automatic Verschiebung ermöglichen Rahmen: elektrische Electronic vertikale Messung Display Electronic horizontale Messung Lenght geschnittenen mm 4200Height von geschnittenen mm 2200Depth von geschnittenen mm 60Motor anzeigen macht Hp 4Blade Durchmesser mm 250Support ...

Category: 1516 vertical mast lifts
New in: used
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0544 Brand: PUTSCH MENICONI Model: SVP 145 - CE Standard Manual vertical panel saw for wood panels , plastic materials, composite materials, aluminium - CE Standard - Year 2011 Horizontal and vertical panel cuttings Retractable rollers to enable the panel sliding Automatic shifting frame : electric Electronic vertical measuring display Electronic horizontal measuring display Lenght of cut mm 4200 Height of cut mm 2200 Depth of cut mm 60 Motor power Hp 4 Blade diameter mm 25 ...

Category: 1516 vertical mast lifts
New in: used
Location: Land-de DE 47179 Duisburg
Seller: Stöcker Beton GmbH

Vertical strapping machine (steel band) height-adjustable Lance Infinitely variable angle of inclination up to 10 degrees for helical strapping Park position in height 2000 mm measured by OK package car profile 2 height basic postures Roadway machines-page ride 3.500 mm Control Siemens S5-095U

Category: 1516 vertical mast lifts
New in: used
Location: Land-de DE 47179 Duisburg
Seller: Stöcker Beton GmbH

Horizontal strapping machine good condition Control Siemens S5-095U Park position in height 2000 mm measured by OK package car profile Vertical drive with incremental encoder (max. 99 programs) With headers and page press

Category: 1516 vertical mast lifts
New in: 1985
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

Vertical machining centre YAM CNC 3 A CNC Fanuc 10M Year: 1985 E plans Parameter list FANUC operator manual Contact person Mr. Müller See also our other offers. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 1516 vertical mast lifts
New in: 2004
Price 13.500 €
Location: Land-de DE 52249 Eschweiler, In der Krause 51
Seller: Kemper Trucks GmbH

Linde H 60 T-03 Treibgas Baujahr 2004 Betriebsstunden 2.440 Tragkraft 6.000 KG Bauhöhe 2.730 mm Hubhöhe 3.500 mm Duplexmast Gewicht 10.150 KG Arbeitsscheinwerfer vorne und hinten Perkins 6 Zyl. Motor Zusatzhydraulik Gabeln 1.500 mm x 150 mm UVV 01/2020

Category: 1516 vertical mast lifts
New in: 2004
Price 13.500 €
Location: Land-de DE 52249 Eschweiler, In der Krause 51
Seller: Kemper Trucks GmbH

Linde H 60 T-03-LPG Year of manufacture 2004 Hours of operation 2,440 Load capacity of 6,000 KG Height 2.730 mm Lifting height 3,500 mm Duplex mast Weight 10.150 KG Working lights front and rear Perkins 6 Zyl. Motor Auxiliary hydraulics 2,400 x 150 mm forks UVV 01/2020

Category: 1516 vertical mast lifts
New in: 1988
Location: Land-de DE
Seller: Czech Industrie Service

max. Schnitthöhe: 165 mm Ausladung: 305 mm Tischgröße: 400 x 400 mm Schnittgeschwidigkeiten: 300 - 700 UpM - stufenlos regelbar Gesamtleistungsbedarf: 0,55 KW / 400 V Maschinengewicht: ca. 100 kg Ausstattung / Zubehör: stufenlos regelbare Bandgeschwindigkeit schwenkbarer Maschinentisch Materialanschlag fahrbares Maschinenuntergestell 1 Ersatzsägeband Alle technischen Daten wurden nach bestem Wissen sowie vorhandener Unterlagen erstellt; Irrtum ausdrücklich vorbehalten. Jeder Interessent hat ...

Category: 1516 vertical mast lifts
New in: 1988
Location: Land-de DE
Seller: Czech Industrie Service

Max cutting height: 165 mm RADIUS: 305 mm Table size: 400 x 400 mm Schnittgeschwidigkeiten: 300 - 700 rpm - infinitely variable Total power: 0.55 KW / 400 V Machine weight: approx. 100 kg Equipment / Accessories: Adjustable belt speed Swivel machine table Material stop mobile machine base 1 replacement blade All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine in advance under power ...

Category: 1516 vertical mast lifts
New in: used
Location: Land-de DE BERLIN
Seller: THAL BAUSATZHALLEN

Structural steel frame with a footprint of round approx. hL110.3 m hB60.4 m H10.3 m and a covered gross floor area of approx. 6.661 square meters. In its second life cycle, this structure could be used for the construction of a logistics warehouse, production hall with overhead cranes and many others. APPROXIMATE DIMENSIONS: Built surface: approx. 6661 square meters; Length: approx. 110.30 meters; Width: approx. 60.39 meters; Height: approx. 10.25 meters; SNOW LOAD: because the prev ...

Category: 1516 vertical mast lifts
New in: 2002
Location: Land-es ES BARCELONA
Seller: INDUSTRIALMAK MACHINES SL

TRUMPF TRUMATIC L3050 5kW Laser cutting machine (2002): In excellent maintenance and working condition. With Loadmaster automatic loader Machine working hours: 43.039 Working area: 3000 x 1500 x 100 mm Control: Siemens Sinumerik 840 D Max. melt steal.: 25 mm Max. stainless.: 20 mm Max. aluminimum.: 12 mm Laser: TLF 5000 LxWxH: 11.100 mm x 4.600 mm. x 2.400 mm Weight: 12.000 kg.

Category: 1516 vertical mast lifts
New in: 1985
Price 15.900 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Bench wood construction Format: 12 x 2,5 m with extract 3.4 m hydraulic vertical standing Press unit in the direction of 12 m Weight approx. 2200 kg Built in 1985 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 1516 vertical mast lifts
New in: used
Location: Land-de DE Chemnitz
Seller: Norbert Gottwald Werkzeugmaschinen

Table 1600 x 400 mm Tool holder ISO 50 maximum travel distance x 1120 mm Max travel y 345 mm Max z vertical stroke 400 mm maximum table load of 1500 kg Speed range 28-1400 RPM. main drive 11 kW connected Power 14.5 kW Voltage 3 x 400 V / 50 Hz weight 3.85 t new electrical cabinet FLEXIVA in 2005 PLC SIEMENS S 7-300 Horizontal Milling spindle Vertical milling head ApS II F400 Horizontal opposite support Coolant system

Category: 1516 vertical mast lifts
New in: 1988
Location: Land-de DE 63165 Mühlheim am Main, Carl-Zeiss-Str. 8-10
Seller: H.-G. Zach Werkzeugmaschinen GmbH

Maschinentyp: Vertikale Holzbandsäge,. Hersteller: Scheppach,. Modell: HBS 32 Vario,. Baujahr: 1988,. Zustand: sehr gut,. Angebotstyp: gebrauchte Maschine,. ,. Technische Daten:,. Ausladung: 305 mm,. max. Schnitthöhe: 165 mm,. Tisch: 400 x 400 mm, schwenkbar,. Antrieb: 0,55 kW / 400 Volt,. Bemerkung:,. stufenlose Bandgeschwindigkeitsregelung: 300 – 700 U/min.,. Materialanschlag,. fahrbarer Unterbau,. Ersatzsägeband,. Gewicht: 50 kg,. ,. Die Maschine ist in einem sehr guten und sof ...

Category: 1516 vertical mast lifts
New in: 1988
Location: Land-de DE 63165 Mühlheim am Main, Carl-Zeiss-Str. 8-10
Seller: H.-G. Zach Werkzeugmaschinen GmbH

Type of machine: Vertical wood band saw. Manufacturer: Scheppach. Model: HBS Vario 32,. Year of construction: 1988. Condition: very good,. Type of offer: used machine, ,. Technical data:. Outreach: 305 mm, Max cutting height: 165 mm,. Table: 400 x 400 mm, swiveling,. Drive: 0.55 kW / 400 v,. Comment:. continuously adjustable belt speed control: 300 - 700 rpm.; Material stop. mobile substructure. spare saw band. Weight: 50 kg. ,. The machine is in a very good shape and ready for operati ...

Category: 1516 vertical mast lifts
New in: 1980
Price 4.980 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Panel saw Striebig 6220 AV F automatic vertical Size: 530 x 220 cm Weight approx. 670 kg L x W x H: 600 x 100 x 280 cm Year of construction 1980 without digital display Price from space The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 1516 vertical mast lifts
New in: 2003
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

AXA Vertikal – Horizontal BAZ mod VHC 2-1760-M-5 / Bj. 2003 / 5 Achsen / xyz : 1760 -600 – 800 / Tisch 1500 x 600 / Integriert Drehtisch Ø 600 / Magazin 44 Plätze ( 2x22 ) / cnc Heidenhain mod. TNC 530 / Drehzahl 100-15.000 U-min. / 40 m-min. / 3 D Messtaster / Neue Spindel und Messlineal in X Achse (Euro 22.000) / Schwenkkopf ist ein Simultan Kopf stufenlos / guter Zustand fe.gi.maschinen.sbg.at AXA vertical - horizontal machining center mod VHC 2-1760-M-5 / year 2003 / 5 axes / xyz: 1760 -600 - 8 ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)