4708 results

similar results found in category trucks/stake body and tarpaulin

Category: 2418 trucks/stake body and tarpaulin
New in: 1980
Location: Country-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Nominal force t 180 Bearing Distance Pressesframe mm 390 Shut height mm 305 Stroke of tool holder mm 50 Adjustment of top tool holder mm 40 Platen area of bed mm 370 x 450 Platen area of top tool holder mm 360 x 200 Pinhole in top tool holder Ø x T 40 x 75 Number of strokes min.-1 60 Drive motor power kW 5,5 Main drive motor sp ...

Category: 2418 trucks/stake body and tarpaulin
New in: 1980
Location: Country-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Nominal force t 180 Bearing Distance Pressesframe mm 390 Shut height mm 305 Stroke of tool holder mm 50 Adjustment of top tool holder mm 40 Platen area of bed mm 370 x 450 Platen area of top tool holder mm 360 x 200 Pinhole in top tool holder Ø x T 40 x 75 Number of strokes min.-1 60 Drive motor power kW 5,5 Main drive motor sp ...

Category: 2418 trucks/stake body and tarpaulin
New in: 1976
Location: Land-de DE
Seller: Czech Industrie Service

Drucklstg.: 40 to. Punch: 24 mm dia. 12 mm St 38 mm diameter. in 8 mm St 105 mm diameter. 3 mm St Total power: 2,2 KW / 380 V Machine weight: 1300 kg Equipment / Accessories: Tool quick-change system El. / pneumat. Clutch Material stop Material requirements Tool cabinet incl. punch, matrices etc. Machine lamp Foot switch All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the hole punch in a ...

Category: 2418 trucks/stake body and tarpaulin
New in: 2000
Location: Land-de DE 58099 Schwerte, Kurzer Morgen 2
Seller: Klann Anlagentechnik GmbH

Pulling vehicle for trailers, Peugeot Diesel engine, fully operational.

Category: 2418 trucks/stake body and tarpaulin
New in: 1971
Location: Land-de DE
Seller: Czech Industrie Service

Grinding diameter: 250 mm Gr. Grinding length: 1000 mm Spindelantriebslstg.: 2,2 KW Total power consumption: approx. 3 KW / 380 V Machine weight: 2000 kg Equipment / Accessories: Internal grinding device Wet grinding device various accessories - see photo All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine in advance under power.

Category: 2418 trucks/stake body and tarpaulin
New in: 1999
Location: Land-de DE
Seller: Czech Industrie Service

GES. Kant length: 2000 mm Drucklstg.: 63 to. Total power consumption: 6.3 KW / 400 V Machine weight: 4000 kg Equipment / Accessories: Electr. adjustable Backgauge Security shield Material support arms height adjustable machine fixators div. segment missions to the edges various tools All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Every interested party can advance test in our factory under power the press brake.

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

The Goldlift 14.70 tracked aerial platform is the only tracked platform that allows you to work up to a height of 14 m. With its small dimensions and Caterpillar drive is the perfect platform for all hard-to-reach places and surfaces at normal stage would sink. Max working height: 14, 00 m Max floor height: 12, 00 m Maximum lateral work area: 7, 00 m Length in transport position: 3,975 m Wide track drive adjustable: 0, 78 m - 1. 08 m Height in transport position: 1, 98 m Work basket (BxL): 0,694 x 1, 33  ...

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

Self propelled platform Load capacity: 230kg Weight: 1520 kg Working height: 7, 76 m Platform height: 5, 76 m Height: 2 m

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

Maximum load: 227kg Max lifting height: 8800mm Max range: 6300mm Weight: 6592 kg Year of construction: 2006

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

Electric scissor lift Genie GS-2646 Max working height: 9, 92 m Maximum platform height: 7, 80 m Platform height - retracted: 1, 16 m Platform length - external: 2, 26 m Platform length - telescoping: 3, 18 m Platform width - outside: 1, 15 m Handrail height: 1, 10 m Retracted length -: 2. 41 m Width: 1, 17m Capacity: 454kg Drive: Electric Weight: 2447 kg

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

Electric scissor lift Max working height: 7, 79 m maximum platform height: 5, 79 m Platform height - retracted: 1, 00 m Platform length - outside: 1, 63 m Platform length - telescoping: 2, 54 m Platform width - outside: 0, 74 m Handrail height: 1, 10 m Retracted length -: 1, 83 m Width: 0, 76m Ground clearance (Center): ca. 6 cm Capacity: 227kg Weight: 1498 kg Drive: Electric

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

Self propelled articulated telescopic work platforms Load: 227kg Working height: 15, 86 m Max range: 7, 55 m Maximum gradient for operation: 45% Total weight: 6870kg

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 80 €
Location: Land-de DE 86497 Horgau, Pflugweg 6a
Seller: RS4 Regalsysteme

Transport frames with recording Guide for trucks; Dimensions height 170 cm, available in 150/180 cm wide; zinc plated rack with printing/wood floor, 80,-euros NET / piece, 12 pieces total. Pickup or by appointment!

Category: 2418 trucks/stake body and tarpaulin
New in: 1994
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

max. Tragfähigkeit: 7 to max. Hubhöhe 3,65 m Breite: 155 cm Länge ohne Gabeln: 305 cm Höhe: 226 cm Eigengewicht: 9980 kg

Category: 2418 trucks/stake body and tarpaulin
New in: 1994
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

maximum capacity: 7 to maximum lifting height 3.65 m Width: 155 cm Length without forks: 305 cm Height: 226 cm Weight: 9980 kg

Category: 2418 trucks/stake body and tarpaulin
New in: 2007
Price 168.000 €
Location: Land-de DE Italien
Seller: Sprenger Machinery - René Sprenger

One used concrete mixing plant OCMER Express 6 (in perfect condition): Only appr. 100 cbm produced! manufactory: OCMER type: Express 6 Year of construction: 2007 capacity appr.: 90 cbm/h mixer: SIMEM twin shaft - MSO 4500/3000 aggregate hopper : 6 x 42 cbm (total appr. 250 cbm) incl. wheiging belt water dosage hopper 800 lt cement dosage hopper 1500 lt controling: OMOLOGATO D400 • consist of: PC, USV, printer, etc. Incl. fresh concrete recycler Already qualified dismantled and ready for ...

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 1.950 €
Location: Land-de DE 59846 Sundern, Bruchhausen 21
Seller: Czech Industrie Service

Chuck: MK 5 Gr. Bohrlstg. in St.: approx. 50 mm Quill stroke: approx. 240 mm Throat depth: 385 mm Speed range: 40-800 RPM Feed: automatically in 5 select areas Table size: 620 mm diameter. Säulendurchm.: 220 mm Total power consumption: approx. 5 KW / 380 V Machine weight: 1400 kg Machine height: 2200 mm Equipment / Accessories: infinitely adjustable speed range 5 automatic drill feeds Swivel rotary table processed baseplate Coolant system All functions are given; only the gear runs loud.  ...

Category: 2418 trucks/stake body and tarpaulin
New in: 2004
Price 13.500 €
Location: Land-de DE 52249 Eschweiler, In der Krause 51
Seller: Kemper Trucks GmbH

Linde H 60 T-03-LPG Year of manufacture 2004 Hours of operation 2,440 Load capacity of 6,000 KG Height 2.730 mm Lifting height 3,500 mm Duplex mast Weight 10.150 KG Working lights front and rear Perkins 6 Zyl. Motor Auxiliary hydraulics 2,400 x 150 mm forks UVV 01/2020

Category: 2418 trucks/stake body and tarpaulin
New in: 1999
Price 9.750 €
Location: Land-de DE 52249 Eschweiler, In der Krause 51
Seller: Kemper Trucks GmbH

Used forklift trucks Make: Kalmar Type: DCD 80-6 H Year of construction: 1999 22,000 hours of operation Load capacity: 8000 KG Positioner Sideshift 6 cylinders Deutz engine Height: 2760 mm Forks: 1,480 x 200 mm

Category: 2418 trucks/stake body and tarpaulin
New in: 1973
Location: Land-de DE
Seller: Czech Industrie Service

Tip height: 230 / 320 mm Top width: 2600 mm Spindle bore: 81 mm Speed range: 25-1500 rpm Spindelantriebslstg.: 7,35 KW Total power consumption: approx. 8 KW / 380 V Machine weight: approx. 3000 kg Equipment / Accessories: 3-shoe wedge bar chucks Röhm 315 mm 1 set of soft JAWS Quick change Toolpost Multifix size B incl. 2 inserts festst. Lynette 4 bake 450 mm faceplate mitlfd. Lathe Chip protection tray removable bed bridge Coolant system Documentation All technical data are created accordin ...

Category: 2418 trucks/stake body and tarpaulin
New in: 1988
Location: Land-de DE
Seller: Czech Industrie Service

Max cutting height: 165 mm RADIUS: 305 mm Table size: 400 x 400 mm Schnittgeschwidigkeiten: 300 - 700 rpm - infinitely variable Total power: 0.55 KW / 400 V Machine weight: approx. 100 kg Equipment / Accessories: Adjustable belt speed Swivel machine table Material stop mobile machine base 1 replacement blade All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine in advance under power ...

Category: 2418 trucks/stake body and tarpaulin
New in: 2007
Location: Land-de DE
Seller: Czech Industrie Service

Gr. Sägeblattdurchm.: 400 mm maximum cutting width: 2500 mm Max cutting height: 130 mm Table - or rail length: 2700 mm Total power: 2 x 4 KW / 400 V Machine weight: 950 kg Equipment / Accessories: 45 ° swiveling saw blades Saw unit Electr. adjustable All technical data are created according to our best knowledge and existing documentation; Expressly reserved by mistake. Each party has the opportunity to test the saw before making a purchase in our factory under power.

Category: 2418 trucks/stake body and tarpaulin
New in: 1991
Location: Land-de DE
Seller: Czech Industrie Service

Year of construction: approx. 1991 Schleifscheibendurchm.: 400 mm Wheel width: 65 mm Speed: 1450 RPM Total power consumption: 1.9 KW / 400 V Machine weight: 200 kg Equipment / Accessories: Machine base All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the Doppelschleifbock advance under power.

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-de DE 32683 Barntrup, Am Betonwerk 15
Seller: FWB-Maschinenhandel GmbH

Vierwegestapler Combi-Lift 4500 WFC Baujahr 2004 CE Hubhöhe 7000 mm Tragfähigkeit 4500 kg Antrieb mit Diesel Mit Kabine Mast Zusammengefahren 3,75 M Höhe 3 Rad Antrieb 4 Wege Positionierung MIT Combilift WFC Gabelträger Gewicht 6700 kg

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-de DE 32683 Barntrup, Am Betonwerk 15
Seller: FWB-Maschinenhandel GmbH

Four way forklift Combi-lift 4500 WFC Year of manufacture 2004 CE Height of lift 7000 mm, capacity: 4500 kg drive with diesel with cab Closed mast height of 3.75 M 3 wheel drive 4-way positioning with Combilift WFC fork medium weight 6700 kg

Category: 2418 trucks/stake body and tarpaulin
New in: 2002
Location: Land-de DE 32683 Barntrup, Am Betonwerk 15
Seller: FWB-Maschinenhandel GmbH

Vierwegestapler Combi-Lift 4500 WFC Baujahr 2002 CE Hubhöhe 4500 mm Tragfähigkeit 4500 kg Antrieb mit Gas Mit Kabine 3 Rad Antrieb 4 Wege Positionierung MIT Combilift WFC Gabelträger Betriebsstunden 7475 H Eigengewicht ca. 9.800 kg

Category: 2418 trucks/stake body and tarpaulin
New in: 2002
Location: Land-de DE 32683 Barntrup, Am Betonwerk 15
Seller: FWB-Maschinenhandel GmbH

Four way forklift Combi-lift 4500 WFC Year of build 2002 CE Lifting height 4500 mm, capacity: 4500 kg drive with gas with cabin 3 wheel drive 4-way positioning with Combilift WFC carriage hours 7475 H Weight approx. 9,800 kg

Category: 2418 trucks/stake body and tarpaulin
New in: 2000
Location: Land-de DE 32683 Barntrup, Am Betonwerk 15
Seller: FWB-Maschinenhandel GmbH

Freight elevator / climbing stage Scanlimber mast transport platform type M/TP 2000 Year 2000 platform size 3000 mm x 1500 kg towers available for 40 m lifting height maximum lifting height possible 100 meters trapdoor available payload up to 2000 kg roller conveyors and cross conveyors with Rails

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 19.000 €
Location: Land-ro RO Timisoara
Seller: Kuhn & Partner Romania SRL

Description Addfield brand Model GM1300 ID 7290 Status Active €19,000 price + VAT Year 2014 Diesel fuel Location Timisoara (RO) Medical incinerator Addfield GM1300 from 2014 on diesel with a volume of 2.3 cubic metres, top loading, retention time: 2 seconds, and thickness casing: 180 mm, capacity: 1300 kg, maximum temperature: 1 100 ° c., combustion chamber dimensions (L x w x h): 2.35 x 1 x 1.13 m Require Exchange of injectors. ExWorks. Price is negotiable and do not include VAT. Contact ...

Category: 2418 trucks/stake body and tarpaulin
New in: 2005
Price 2.500 €
Location: Land-ro RO 41022 Oradea, Calea Aradului, no. 23/39
Seller: Kuhn & Partner Romania SRL

Description Mark System Air Model D4-DVV800 K/40 ID 7289 Status Active €2,500 price + VAT Year 2005 Location Of Oradea (RO) Industrial fans to extract smoke, System Air DVV800 D4-K/40 in 2005. Maximum flow: 25500 m3/hr, maximum power: 9.5 kW, fuse: 18 A, maximum temperature of air transportability: 1200 c. Weight: 172 kg. Protection class: IP54 engine housing. Rotational speed: 1440 r.p.m. 3 phase Current. 5 pieces available and a backup engine. Price is per piece. ExWorks. Price is negotiable and d ...

Category: 2418 trucks/stake body and tarpaulin
New in: 1998
Location: Land-de DE
Seller: Maschinenhandel Kmet

Baujahr 1998 Spindelumdrehung Stufenlos: 20-125U/min. Max. Raddurchmesser: 1480 mm Max. Drehdurchmesser: 1000 mm Max. Drehtiefe: 300 mm hydr. Vorschub: 0-500 mm/m. hydr. Eilgang: 800mm/m. Guter Zustand

Category: 2418 trucks/stake body and tarpaulin
New in: 2000
Location: Land-de DE
Seller: Czech Industrie Service

Workspace in x 760 mm Workspace in Y: 305 mm (+ 305 mm head adjustment) Workspace in Z: 405 mm Table size: 1250 x 230 mm Tool holder: SK 30 Spindle drive: 2,25 KW Total power consumption: approx. 3 KW / 400 V Machine weight: 1000 kg Equipment / Accessories: 3 axis digital display Feed X - axis swivelling vertical milling head with automatic boring Quill SK 30 incl. 5 Collet Collet Chuck 4-20 mm 2 short tool holder SK 30 4 height adjustable machine fixators Coolant system All technical data a ...

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 1.350 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: Solid Type: TB 6 Drilling capacity in steel: 6 mm Drilling capacity aluminium: 10 mm Spindle stroke: 60 mm Extension spindle to column: 150 mm Speed: 940-8,000 RPM in 10 steps Keyless chuck in mobile, X-axis pneumatically tensionable table Coolant system 73450 Neresheim price plus 19% VAT from site Mistakes and intermediate sale is reserved

Category: 2418 trucks/stake body and tarpaulin
New in: 2004
Price 9.900 €
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

Capacity: 200 kg Electric drive Platform height: 810 cm Battery: 24V, 620 AH, 2004 Weight: 3300 kg

Category: 2418 trucks/stake body and tarpaulin
New in: 1992
Price 750 €
Location: Land-de DE
Seller: Czech Industrie Service

Construction year: CA 1992 Sanding belt dimensions: 50 x 2000 mm Schleifscheibendurchm.: 200 mm Speed: 2800 RPM Antriebslstg.: 0.8 KW Total power consumption: approx. 1.5 KW / 400 V Machine weight: 150 kg Equipment / Accessories: integrated suction ESTA Machine base All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Any interested party can advance test the machine under power.

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 14.900 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: Maho Type: MH 700 S Traverse path X / Y / Z: 700 / 500 / 600 mm B-axis: 360° Quill stroke: 80 mm Spindle taper: ISO 40 Spindle speeds: 20-6,300 RPM Feed range X, Z axis 1-3,000 mm / min; Y axis 1-4,000 mm / min; B-axis 0.1 3,000 ° / min Rapid traverse X, Z axis 10 m / min; Y-axis 8 m / min; B-axis 20 RPM NC rotary table 630 mm Price plus 19% VAT from site near Pforzheim Mistakes and intermediate sale is reserved

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 5.900 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: White Heilbronn Type: Junior Top width: 1,000 mm Tip height: 150 mm maximum turning diameter over bed: 450 mm Spindle speeds: 40-2,000 rpm 3 - jaw Chuck Multifix Voltage: 380 v Output: 4 kW Dimensions W x D x H: 2,400 x 1,000 x 1,650 mm Price plus 19% VAT from site near Pforzheim Mistakes and intermediate sale is reserved

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 3.900 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: Wörner 6 work stations / machines Price plus 19% VAT from site near Pforzheim Mistakes and intermediate sale is reserved

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 4.750 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: Pinacho Type: S-90 / 180 Top width: 1,000 mm Tip height: 180 mm Turning diameter over bed: 360 mm Swing over cross slide: 205 mm Turning diameter in the bend: 520 mm Spindle bore: 42 mm Speeds 30-2,000 RPM in 18 steps Multifix holder 3 - jaw Chuck Machine weight: 800 kg Voltage: 380 v Price plus 19% VAT from site near Pforzheim Mistakes and intermediate sale is reserved

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 12.000 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: Lid Type: FP 4 MA Control: Contour 2 with Handwheel Traverse path X / Y / Z: 485 / 385 / 380 mm Speeds: from 63 3,150 U/min Feed: 2-1,000 mm / min stepless adjustable Rapid traverse rate: 3,000 mm / min Chuck SK40 Price plus 19% VAT from site near Pforzheim Mistakes and intermediate sale is reserved

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 12.500 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: Takumi Type: V8A Year of construction: 1998 Travel in X / Y / Z: 810 / 510 / 560 mm Spindle speeds from 0 to 8,000 rpm Feed 1-7,000 mm / min Rapid traverse rate: 15,000 15,000 12,000 mm / min Table size L x B: 1,000 x 510 mm Distance bottom spindle: 150-700 mm 24 Werkzeugwechler SK 40 Total power: 20 kVA Machine weight: 4.800 kg Dimensions W x D x H: 2,900 x 2,160 x 2.360 mm Price plus 19% VAT from site near Pforzheim Mistakes and intermediate sale is reserved

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 500 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

2 x identical machines on offer (the price refers to a machine) Coffee, espresso, cappuccino, chocolate, tea... Manufacturer: Bianchi Type: Lei SA semi-automatic Office coffee service New price was about â?¬ 2.300.-NET 12 backlit as direct elections, as well as as prefix configurable keys 32-stelliges alphanumeric display 170 mm high output tray, suitable for pot, mug and retractable Cup holder with a direct water connection Standard boiler for espresso: 1500 W Water heater for instant drinks: 20 ...

Category: 2418 trucks/stake body and tarpaulin
New in: 1972
Price 13.700 €
Location: Land-de DE Luebeck
Seller: Sprenger Machinery - René Sprenger

1 piece used 3-deck screening and washing machine, manufactoryr: Wolff, Flensburg YOC 72 1,6m x 3,0m, capacity: appr.. 50 tons/h sizes of gravel: 2-8, 8-16, 16-32 7,5 KW Motor, presently covering material: 1. on top 18mm plastic/metal, 2. middle 8mm metal, 3. bottom 2mm harp Condition: fully functional, was working until 8.2.1019 Need to check: Bearing oft he screen shaft and some angles of the screening covering need to check or to reconditioned. Available: immediate location: near Lueb ...

Category: 2418 trucks/stake body and tarpaulin
New in: 2009
Price 2.400 €
Location: Land-at AT 4075 Breitenaich
Seller: Lehner GmbH

Linde Stapler L10 Hubwagen ist in einem guten Zustand, siehe Bilder! Hersteller Linde Elektro Hubwagen Baujahr 2009 Hubhöhe 3,2 m Tragfähigkeit/Last 1000 kg Betriebsstunden 3570 h Verhandlungspreis: € 2.400,-- netto ab Lager Ware ist auf Lager. Transport auf Anfrage möglich. Besichtigung jederzeit nach Vereinbarung möglich. Weitere Infos auf Anfrage. Ständig über 5000 lfm Palettenregale von zahlreichen Herstellern auf Lager. (Änderungen und Irrtümer in den technischen Daten, ...

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-de DE 58515 Lüdenscheid, Stüttingshauser Ringstr. 39
Seller: WTS Maschinenhandels KG

For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 1.000 €
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

-Fork length: 1.2 m -Sideshift -Tine adjuster -Forks at the minimum

Category: 2418 trucks/stake body and tarpaulin
New in: used
Location: Land-de DE 59581 Warstein
Seller: Maschinenhandel-Reuss GmbH & Co. KG

DATA ON THE MACHINE Machine type: spot welding machine Manufacturer: Knife Griesheim / PECO Model: SUP75D430 State: unchecked (gebraucht) Site Warstein, Germany Reference number M-MES-0219 DESCRIPTION We offer you, a used spot welding machine by the manufacturer of Messer Griesheim / PECO. The technical data, refer to the rating plate. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserv ...

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 52.500 €
Location: Land-de DE 55624 Gösenroth, Industriestr. 1
Seller: Carsten Schneider GmbH

Low loader in the winter 2017 / 2018 completely overhauled all crossbars new new wood floor, 8 spare tyre in sealed, TRUCK has received a 2010/2011 new engine and new transmission Mileage approx 200,000 km December 2018 1 radiator new Retarder Bordmatic Crane Climate Currently 836.000 km total train has approval section 70 TÃ?V / SP new more info on request

Category: 2418 trucks/stake body and tarpaulin
New in: 2013
Location: Land-at AT 3100 St.Pölten, Porschestr. 23a
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Crawler excavator Komatsu PC138US-10 Serial. 400029, BJ: 2013, performance: 72.6 kW, weight: 14.420 kg, product / Indentifikationsnr. KMTPC245H77F40029, read operating hours: approx. 6.300 h facilities: built with rear shield with built-on changer Martin as well as built-on gripper Martin (model: unknown) comments to the State: several chains of rubber track are replaced. All-round excavators, div. color paint damage, stronger abrasions, paint fading, paint crumbling off partially abrasions, rust all around all ar ...

Category: 2418 trucks/stake body and tarpaulin
New in: used
Price 14.900 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Manufacturer: Crown Type: DA06LNF First registration: 03 / 2013 HU: 09 / 2019 and SP 03 / 2019 very good condition! Max. Total weight: 24,000 kg Empty weight: 8.730 kg Payload: 15.270 kg LaderaummaÃ?e L x W x H: 11,130 x 2.480 x 2.680 mm Gas official length: 11.250 mm Loading Board wall 2,500 kg Liftgate with battery box for autonomous operation Liftgate, a separate power supply to the tractor EDSCHA-sliding Hood (for crane shipments) Tautliner / curtainsiders (Schiebegardinen-plane on bo ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)