use used for sale

Used TREPKO type 233KSP Filling monoblock - Year 2015Technical Specifications & Performance DataThe Trepko Type 233KSP filling triblock/monoblock is industrial filling and capping equipment for continuous gravimetric dosing of food, personal-care, household and industrial liquid products. Manufactured in 2015, this machine combines filling and plastic cap application within a compact production system designed for accurate container handling.Manufacturer: TrepkoModel: Type 233KSPProduction capacity: up to 7,200 containers/hourOperating rate: 40 cycles/minFilling system: gravimetric fillingFilling valves: 3Filling nozzles: 3Container format range: 100 g to 500 g, adaptable through format changeoversDimensions: 3.3 m length, 2.0 m width, 3.3 m heightWeight: 2,500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen Bradley CompactLogix 1769-L30ERM PLC and a Pro-Fa ...

The cabinet (Hydrochloric acid tank modul) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as a chemical centrifugal pump and compressed air diaphragm pump. With the unloading module, the delivered chemical was conveyed through the filter into a storage tank. The system is of very high quality and can be used for many chemicals. 1x centrifugal pump (manufactured by Richter type MNK-B / F-P 50-32-125) / 1x Almatec Futur 50T, 1x Almatec A10TTT, valve and filter units, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit and electrical cabinet

Used TETRA PAK TBA19 200 ml Slim filling lineTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak carton filling and secondary packaging solution built around a Tetra Pak TBA 19 V10 filling machine. The line is configured for the 125 ml Slim carton format and includes filling, straw application, tray packing and conveying equipment for compact beverage production and industrial packaging operations.Filling machine: Tetra Pak TBA 19 V10Format: 200 ml Slim cartonYear of manufacture: approximately 1996Running hours: approximately 26,000 hConveyor length: approximately 30 metersConveyor configuration: 4 × 90° curves and 2 × chain tensionersAdvanced Automation & Control SystemsThe equipment is arranged as an integrated filling and packaging line, allowing the filler, straw applicator, tray packer and conveyor system to operate as connected production stages. Th ...

Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. 2x compressed air diaphragm pumps Almatec Futur 50T / 1x Almatec E10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.

Used Linker 36-36-12 filling monoblockTechnical Specifications & Performance DataThe Linker 36-36-12 Rinsing, filling and capping monoblock is an industrial packaging machine designed for volumetric filling and plastic screw-cap application. Manufactured in 2002, this unit combines filling and capping functions in one compact bottling equipment platform for efficient beverage production and low-viscosity liquid handling.Production speed: 140 units/min based on 500 cc presentations (8.400 units/hour based on 500ml)Rinsing grippers: 36Filling valves: 36Capping heads: 12Compatible formats: 0.25L to 1.0L, with format changeovers for additional presentationsContainer handling: PET, PP and HDPE containers with plastic capsDimensions: 6000 mm length, 6000 mm width and 3600 mm heightWeight: 3500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen-Bradley MicroLogix 150 ...

The cabinet (Hydrochloric acid tank modul) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as a chemical centrifugal pump and compressed air diaphragm pump. With the unloading module, the delivered chemical was conveyed through the filter into a storage tank. The system is of very high quality and can be used for many chemicals. 1x centrifugal pump (manufactured by Richter type MNK-B / F-P 50-32-125) / 1x Almatec Futur 50T, 1x Almatec A10TTT, valve and filter units, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit and electrical cabinet

Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS int ...

Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling  ...

The cabinet (Hydrochloric acid tank modul) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as a chemical centrifugal pump and compressed air diaphragm pump. With the unloading module, the delivered chemical was conveyed through the filter into a storage tank. The system is of very high quality and can be used for many chemicals. 1x centrifugal pump (manufactured by Richter type MNK-B / F-P 50-32-125), 1x Almatec A10TTT, valve and filter units, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit and electrical cabinet

Used Tetra Pak TBA 19 200ML Slim Filling lineTechnical Specifications & Performance DataThis used bottling line is built around a Tetra Pak TBA 19 V10 filling machine for 200 ml Slim carton formats. Designed for dairy product processing, the line provides an integrated solution for filling, straw application, secondary packaging and product conveying in an industrial packaging environment.Filling machine: Tetra Pak TBA 19 V10Container format: 200 ml Slim Tetra Brik cartonProduct application: dairy productsYear of manufacture: approximately 1996Running hours: approximately 26,000 hoursConveyor system: approximately 30 meters, including 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsThe line combines dedicated filling and packaging equipment into a coordinated production arrangement. Its conveyor system supports the controlled transfer of individual cartons be ...

Used Wild GoosePak canning line - Year 2017Technical Specifications & Performance DataThis used bottling line is a 2017 Wild Goose 4-head canning line configured for industrial packaging and beverage production in standard LOE aluminum cans. The line is identified as WGC-250 and includes Wild Goose M-250 equipment together with a Wild Goose Paralleltrain unit. It is configured for three established can formats, allowing operators to run multiple retail pack sizes within the same second hand canning system.Manufacturer: Wild GooseLine model: WGC-250Year: 2017Configuration: 4-head canning lineCan formats: 0.355L, 0.473L and 0.568L standard LOE cansElectrical supply: 110 VAdvanced Automation & Control SystemsThe line is described as functional and is arranged as an integrated can handling and filling solution. The supplied information does not identify a PLC type, while the 110 V electrical ...

The cabinet (hydrochloric acid tank module) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as with a compressed air diaphragm pump. The tank module was used to convey the delivered chemical through the filters into a storage tank. The equipment is of very high quality and can be used for many chemicals.1x Almatec Futur 50T, valve and filter units, sampling box, flow controller with pressure transducer, flushing by spray gun, compressed air unit and E cabinet.

Used OLMOS compact eco2 linear capper labeller - glass and PET Technical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable t ...

Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. 1x Almatec E10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.

Used Tetra Pak TBA19 125 slim 7500 PPH - Year 2009Technical Specifications & Performance DataTetra Pak TBA/19 TBA 12SS (RCI) filling machine configured for aseptic carton filling and integrated straw application. Built in 2009 and reconditioned in 2017, this equipment is designed for high-output industrial packaging operations where accurate filling and reliable downstream pack presentation are required.Manufacturer: Tetra PakModel: TBA/19 TBA 12SS (RCI) 030V Production speed: 7,500 packs/hFunctions: Filling and straw applicationManufacturing year: 2009Reconditioned: 2017Documentation: Manuals availableAdvanced Automation & Control SystemsThis filling and straw application machine is intended for automated carton packaging workflows. The integrated process combines carton filling with straw application, supporting continuous product handling and coordinated operation within an industrial ...

The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as a chemical centrifugal pump and compressed air diaphragm pump. With the unloading module, the delivered chemical was conveyed through the filter into a storage tank. The system is of very high quality and can be used for many chemicals. 1x centrifugal pump (manufactured by Richter type MNK-B / F-P 50-32-125) / 1x Almatec Futur 50T, valve and filter units, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit and electrical cabinet

Used PLASTIBLOW PB1H-D blow molding machine for HDPE - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold)Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V,  ...

Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes  ...

Dosing station / pumping station for dosing hazardous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit. The dosing station was used to pump the chemical from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. Valves, sampling box, flow regulator with pressure sensor, flushing by means of spray gun, compressed air unit, control cabinet with control panel (touch screen) and interface. Pumps shown (2x Almatec Futur 50T air-operated diaphragm pumps / 1x Almatec A10TTT) are available separately)

Used KRONES Gera Returnable Glass Bottling Line, 20000 BPHTechnical Specifications & Performance DataThis used bottling line is a complete returnable glass bottling line designed for handling bottles in crates, covering the process from crate preparation through filling, labeling, inspection, crate packing and palletizing. The line combines equipment from Krones, Kettner, Rink, Syscona, Matec, Falterbaum and Bohrer.Filler capacity: 20,000 bphFilling type: isobaric filling (counter-pressure) - ( Heineken-style)Premix capacity: 22,000 L/hContainer formats: 0.33L and 0.75L returnable glass bottlesPackaging configuration: bottles in cratesClosure type: plastic screw caps Labeling technology: wet-glue labeling with 2 aggregatesMain equipment years: 1996–2016Advanced Automation & Control SystemsThe line includes automated systems for crate sorting, crate decapping, bottle unloading, washing, ...

Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordi ...

The cabinet (hydrochloric acid tank module) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as with compressed air diaphragm pump. The tank module was used to convey the delivered chemical through the filters into a storage tank. The unit has a very high quality finish and can be used for many chemicals. 1x Almatec A10TT, valve and filter units, sampling box, flow controller with pressure transducer, rinsing by spray gun, compressed air unit and electrical cabinet

description Heraues hot air sterilizer for killing pathogens and bacteria. The sterilizer consists of a double-walled, heat-insulated sheet metal housing, door with unlocking, heating, fan and control cabinet. Recirculated air: The circulating air fan draws in the air from the usable space via the heating and blows it back into the usable area when heated. Fresh air: With fresh air, the fan blows air into the interior of the oven. The fresh air is drawn in with the circulating air by the circulation fan and blown into the usable space via the heating.

Ex-proofed solvent preparation station made of stainless steel. The station consists of: -> 3 pcs. compressed air driven diaphragm pumps -> stainless steel solvent tank -> drip pan made by Denios -> ex-proofed agitator and stainless steel reactor -> stainless steel piping

System separator type BA300 System separator - Ductile iron with backflow preventer on input and output side, 3 ball valves, drain valve Flanges according to DIN EN 1092-2 for safeguarding drinking water systems against backpressures, backflow and back suction, for residential buildings, industrial and commercial purposes, horizontal installation position with drain valve downwards, discharge volume in case of failure: 35 m3 / h, 3 ball valves for connecting a differential pressure gauge

Step screen for separating dirt and suspended solids from wastewater. The screenings are transported step by step to the outlet by a moving set of lamellae. Suspended solids that are smaller than the gap dimensions are also transported through the screenings carpet. The screen was overhauled in 06.2023.

The 6-station cleaning machine was part of a lens processing process. As an intermediate process, it took over the necessary cleaning of the transport containers, The cleaning process was carried out fully automatically from the loading station to the removal station. This function (station 1 and 6) can no longer be operated, because the systems conveyor belt is no longer available. - Station 2: post-cleaning with ultrasound in heated cleaning liquid. - Station 3: Rinsing with heated rinsing liquid, blowing off the residual liquid. - Station 4: pre-drying with heated air. - Station 5: Post-drying with heated air. - Control: Siemens SPS S7-200

Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. 1x compressed air diaphragm pumps Almatec A15 TTT / 1x Almatec A15 TTZ / 1x Almatec A10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.

Huber Rotamat RO2 as fine screen version and with EX-protection, spray nozzles and automatic press zone flushing. The intended use of the RO1 is the separation of solids from wastewater, compaction and washing of the screenings. Range of application:- Wastewater treatment plants (municipal and industrial) The machine had its last application in a municipal wastewater treatment plant.

Double softening system consisting of: - 2 GRP pressure vessels (Pentair) - 2 control heads (1 control head must be renewed) - 1 sole tank - Control unit MMP 81 (Gebrüder Heyl) - Piping with pneumatic diaphragm valves The plant is dismantled and stored in Warburg.

The system consists of a stainless steel vessel with a boiling and condensation chamber. It is equipped with defoaming, sight glass with lighting and cleaning. Furthermore, a concentrate pump, distillate pump and a vacuum pump as well as a piston compressor are available.

Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate  ...

Used AVE 16-16-4 filling line, still & sparkling water - 2 PET blowerTechnical Specifications & Performance DataThis used bottling line is configured for beverage production in 0.33L, 0.5L and 1.5L bottle formats. The AVE filling line, manufactured in 2008, is designed for spring water and flavored water. Its stated capacity reaches 6,000 bph for 0.5L bottles and 2,500 bph for 1.5L bottles.Production capacity: 6,000 bph for 0.5L bottlesProduction capacity: 2,500 bph for 1.5L bottlesCompatible formats: 0.33L, 0.5L and 1.5LFilling monoblock configuration: 16/16/4 rinser, filler and capperCap specification: 28mm plastic screw cap, PCO 1881 neck finishSMF Combi 200 blow molding machine: 2003, 700 kg, 3 x 380 V, 28 kW, 50 HzSMF Combi 400 blow molding machine: 2016Advanced Automation & Control SystemsThe line combines bottle forming, conveying, filling, capping, labeling and shrink wrapping eq ...

Used Sacmi Labeling Machine Opera year 2010 overhauled in 2025 Model: Opera 400 (2010) • Speed: 45,000 Bottles/hour • Status: ready for operation • Formats: 500 ml, 1 L, 1.5 L. Reconditioned OPP roll-fed labeler, overhauled in 2025. This overhauled labeling machine delivers stable high-speed performance for multi-format lines and qualifies as robust bottle labeling equipment for continuous production. Performance and Specifications: The Opera 400 maintains consistent output at 45,000 BPH with quick format changes across 500 ml, 1 L, 1.5 L. Two labeling stations support continuous operation, with automatic label adjustments and manual head adjustment to keep tolerances steady at speed. This is a reconditioned OPP labeling machine. Work performed during the 2025 overhaul: The jacks The plates The glue roller were overhauled The roller motor was replaced New safety guards were install ...

Doses product into trays under a weigher, The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage., The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/jasa-tray-filling-station/, Type: Tray filling station, Filling: Hopper with two flaps, Controls: On/off and two adjustable fill times, Electrical: 230 V, Construction: Stainless frame on castors

Used multi-spindle drilling machine for drilling holes in wooden shutters (louvre shutters). Ideal for producing wooden shutters with multiple symmetrically arranged holes. Brand, exact model, number of drills, drilling capacity, motor power, electric connection, weight and dimensions are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-26

Used Tetra Pak A3 speed 030V 200 slim Filling lineTechnical Specifications & Performance DataThis complete used bottling line is a Tetra Pak A3 Speed (030V) configuration dedicated to 200 ml Slim cartons. It is a second hand, overhauled industrial packaging solution engineered for consistent performance in beverage production. All core components are manufactured by Tetra Pak for seamless compatibility and robust uptime.Main filler: Tetra Pak A3 Speed (030V), year 2011Container format: 200 ml Slim cartons (0.2L)Production capacity: 24,000 packs/hourRecorded hours: Filler 25,731 h; Accumulator 1,609 h; Straw applicator 14,219 h; Case packer 21,065 hLine status: Used and overhauledManufacturer: Tetra Pak (all included machines)Container type: Carton (brick-style)Included models: A3 Speed 030V filler; ACHX 30 accumulator; SA30 straw applicator; CBP30 Speed case packerAdvanced Automation & C ...

Used economy-type woodworking surface planer (jointer) for smooth, flat planing of timber surfaces. Suitable for small joinery shops and workshops. Brand, exact model and technical specifications (planing width, weight, motor power) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-29

Used DC GF 3-in-1 filling line, sparking water 6000 BPH, Year 2013Technical Specifications & Performance DataThis used bottling line is configured for PET bottle production and beverage filling, combining a linear blow molding machine, high-pressure compressed-air equipment, an integrated rinsing, filling and capping monoblock, labeling, coding, saturation and shrink-wrapping equipment. The line is designed for industrial packaging of carbonated, oxygenated and non-carbonated beverages.Blow molding capacity: 1,000–2,000 bphFilling monoblock capacity: 4,000–6,000 bph at 0.33LSupported bottle formats: 0.33L, 0.5L and 1.5LContainer material: PET bottles with PCO neck finishComplete line footprint: approximately 11 m × 6 mBlow molder configuration: linear, 2 cavities, 20–50 g preformsFilling monoblock: 18 rinsing stations, 18 filling valves and 6 capping headsAdvanced Automation & Con ...

Used automatic beer filling line 1400 BPH on 330ml - Year 2016Technical Specifications & Performance DataThis used bottling line is an automatic beer bottling solution manufactured in 2016 for the processing of 0.33L bottles. The line is designed for a production capacity of 1200–1400 bph and combines rinsing, isobaric filling, crown capping, labeling, coding and bottle conveying in a compact industrial packaging configuration.Production capacity: 1200–1400 bphBottle format: 0.33LBottle Height: Min. H 180mm, Max. H 350mm. Product application: BeerYear of manufacture: 2016Filling monoblock: ISO 9-9-1CStated installed power: 5.5 kW across the labeling machine, filling monoblock and tables/conveyorsAdvanced Automation & Control SystemsThe automatic ISO 9-9-1C triblock integrates a rinsing turret, an isobaric filling turret and a capping turret in one synchronized bottling machine. The r ...

Used security roller shutter (roll-up shutter) for a shop entrance. Width: 5.80 m (5800 mm). Height: 3.80 m (3800 mm). Condition: used. Suitable for shop fronts, warehouses, workshops and other commercial or industrial openings. Dismantled/installed condition and the operating mechanism are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-124

Used BORELLI T12 TECNA line - Year 2023Technical Specifications & Performance DataThe Borelli TECNA Line T12 is a glass bottle rinsing monoblock designed for sterile-water rinsing before filling in an automatic bottling process. This used bottling line component is fitted with a 12-pincer and 12-nozzle rinsing turret, providing a simple rinse treatment with discharged rinse water.Manufacturer: BorelliModel: TECNA Line T12Year of production: 2023Maximum speed: 3000 bphRinsing system: 12 pincers/nozzlesCompatible containers: Glass bottlesCompatible formats: 0.5L, 0.75L (2.000 bph) and 1.5L (1.500 bph) bottle formats 0.375 L Bordeaux – Ø 63 × H 235 mm – cork stopper0.750 L Bordeaux – Ø 76.5 × H 288 mm – cork stopper0.750 L Bordeaux – Ø 76.5 × H 290 mm – cork stopper1.000 L – Ø 86 × H 314 mm – crown cap / cork1.000 L – Ø 87 × H 315 mm – crown cap / corkDimension ...

Used PROCOMAC RM 36-42-6 filling monoblock, flat liquids 9000 BPHTechnical Specifications & Performance DataThe PROCOMAC FILLSTAR BLOCK is a filling monoblock designed for integrated rinsing, filling and capping of still products in PET bottles. Built in 2002, the PET HAL 36/42/6 configuration combines a PROCOMAC GRIPSTAR rinser, HAL SF filler and AROL PK capper in a compact rotary bottling unit for beverage production and industrial packaging applications.Manufacturer: PROCOMACModel: PET HAL 36/42/6Configuration: rinser, filler and capper monoblockMaximum production speed: 9,000 bph on 0.5L bottlesRinser: PROCOMAC GRIPSTAR with 36 grippers and 1 treatmentFiller: HAL SF with 42 filling valves for still liquidsCapper: AROL PK with 6 heads for PCO 1881 capsCurrent bottle formats: 0.5L, 1.5L and 2.0LBottle neck diameters: 66 mm, 89 mm and 95 mmList of overhaul / revision works - Overhaul of ...

Used GAI 5003A filling triblock 5000 BPH, still wineTechnical Specifications & Performance DataThe GAI 5003A is a filling monoblock designed for still wine bottling operations. Manufactured in 2000, this rotary bottling machine combines bottle rinsing, vacuum filling and corking functions in one integrated unit for efficient glass bottle handling.Manufacturer: GAIModel: 5003AYear: 2000Production capacity: 4,500–5,000 bottles per hourFilling system: Vacuum fillingRinser: 20 grippers with water and air treatmentRotary filler: 20 filling valvesCorking unit: 4 headsConstruction: 304 stainless steelSanitization: Water at 90°CThe machine is suitable for standard wine bottle formats, including Burgundy and Bordeaux-style bottles. Available bottle formats include 3/8 bottle and 750 ml Burgundy and Bordeaux bottles.Advanced Automation & Control SystemsThe GAI 5003A filling monoblock is equippe ...

Used economy-type woodworking surface planer (jointer) for smooth, flat planing of timber surfaces. Suitable for small joinery shops and workshops. Brand, exact model and technical specifications (planing width, weight, motor power) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-30

Used Tetra Pak A3Flex 1000 Base - Year 2005Technical Specifications & Performance DataThe Tetra Pak A3/Flex 1000 Base is an aseptic carton filling machine designed for industrial packaging and beverage production. It forms, fills and seals carton packs in a controlled filling process, supporting efficient integration into an aseptic carton packaging operation.Manufacturer: Tetra PakModel: A3/Flex 1000 BaseDrawing specification: 648576-0100Year of manufacture: 2005Advanced Automation & Control SystemsThis filling machine is intended for automated carton handling, forming, filling and sealing within an industrial packaging line. The A3/Flex platform supports coordinated operation with upstream product preparation and downstream conveying, packing and coding equipment.Production Line Integration CapabilitiesSuitable for use as the central filling station in an aseptic carton production line ...

Metal cut-off saw with 225 mm disc for dry cutting of pipes and profiles. Manual downward head movement, mitre cutting up to 45 degrees, vice, single-phase 1 HP motor. Lightly used, checked and ready to work. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-64

Used Tetra Pak A3 Flex 1000 SQ filling line 7000 PPHTechnical Specifications & Performance DataThis used Tetra Pak A3 FLEX 1000SQ filling line is designed for industrial packaging and beverage production in carton packages. The main filling machine was manufactured in 2005 and is configured for the 1000SQ format, with a production capacity of 7000 packages per hour. The filler has been upgraded from 100V to 300V.Main filling machine: Tetra Pak A3 FLEXMain format: 1000SQAdditional format capability: 500SQ through a quick change kitProduction capacity: 7.000 packages per hourIncluded accessories: 2 paper reels and 1 paper trolleyAdvanced Automation & Control SystemsThe line is arranged as an integrated carton filling and packaging system. Its format-specific configuration supports coordinated operation between the filler, cap applicator, accumulation equipment and cardboard packing section ...

2 colors 4 grey / 7 black. with seat cushion Auction-ID: A1-51213-49

Used Tetra Pak A3 Flex 200S, 100V filling lineTechnical Specifications & Performance DataThis used Tetra Pak A3 Flex filling line is configured for the 200S carton format and is centered on a Tetra Pak A3 Flex 100V filling machine manufactured in 2005. The line includes coordinated downstream equipment for carton handling, straw application and cardboard secondary packaging.Filler: Tetra Pak A3 Flex, version 100V, year 2005Line format: 200SAccumulator: Tetra Pak ACHX30-50M, year 2010Straw applicator: Tetra Pak SA22, year 2009Cardboard packer: Tetra Pak CBP32, year 2009Included accessories: 2 paper reels and 1 paper trolley supplied with the fillerAdvanced Automation & Control SystemsThe filling line is arranged as an integrated industrial packaging system, with the accumulator supporting product flow between filling and downstream operations. The equipment configuration is intended to co ...