126,679 used machines on RESALE, but how to find them? Machine Search
Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm
Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm
Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm
Twist drill bit with internal cooling DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) diameter: Ø 18.25 mm holder: Ø 20 m used, tested ! Dimensions: 200 x 20 x 20 mm
Unused new in packaging
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-22
Diesel engine 8.2 kW orange color Auction-ID: A1-45995-6
Auction-ID: A1-45995-19
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-23
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-24
Petrol engine electric ignition red color Auction-ID: A1-45995-8
40HC container with white side and rear doors Auction-ID: A1-45995-1
71x16.5x30.5 cm Auction-ID: A1-45995-15
71x16.5x30.5 cm Auction-ID: A1-45995-14
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-20
TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-21
USED UNTHA SINGLE SHAFT SHREDDER, Type LR 1400, rotor width 1.400 mm., speed 30/44, 2 x 22 kw drives, constructed in 2006, connected and running, Feed opening 1.400 x 1.050 mm, Constructors description: The strong throughput capacity of the LR1400 shredder is a result of the strong drive motors and the performance-oriented machine configuration. The configuration comprising a long rotor, a large perforated screen surface and optimised cutter geometry provides the performance which you require in your plant. High performance requires reliable machine operation, which we ensure with a full range of high-quality technological components., Thanks to the rotors special mounting, dust-protected bearings, tried and trusted gear damping and special cutting tools, the wood shredder is also very low maintenance and has a long service life. The intelligent drive control shuts the shredder motor dow ...
PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 280 kw. d.c. drive and starter (new 2019), Electric cabinet, CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offeres : checked for good working conditions OR reconditioned, installed power - used power in work: about 60-65% : 280, availability: ready-to-go
HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED
FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, ---------------------------------------------------------------------- -----------------, SEE ALSO OUR[OTHER FIMIC SCREENCHANGER](.germanplast/listings?q=GEMA100), installed power - used power ...
Hydraulic punch, punching rack for the use of punching units JOKA type HP-SHydraulic hole punch, hydraulic press for punching bracketYear of construction approx. 1995Printing capacity 5 ton. Projection 155 mmStroke approx. 20 mmPunching unit width max. 54 mmPunching unit height max. 220 mmDie holder 48 mmMotor power 1.5 kWNeching connection 230 volts, 50 Hz- for the universal use of punching units JOKA SW 20 or SWD 20- Projection of the punching units can be larger, can be pushed through to the rear- Stroke release via
Bausano Modular Compact Line , All 7m Lenght + Tilting, Maximal Profile Section 180 x 100 mm,, Maximal Traction Force 10 kN, Maximal Speed 15 m/min, Specifications: Calibrator type BP/2P/ML, Lenght Calibrator Holder 2500 mm, Longitudinal Adjustement 600 mm ( Gear Motor- Traverse Motor 0.37 kW ), Transversal Adjustment 40 mm, Vertical Adjustment 880 / 1130 mm, Cooling Water 12 Connections, Vacuums Pumps 2 x 4 kW, Vacuum 16 Connections, Haul-off unit type TNP 15 -150 MB, Tracks Lenght x Wide 1500 x 150 mm, Track Max Opening 95 mm ( 2 Pneumatic Cylinders ), Max Speed : 25 m/min, Max Take Off 23 kN, 2 Direct Gear box Motor to everyone carterpillar , 2 x 1.1 kW, Saw type TAV 90, Max Vertical Adjustment 95 mm, Max Cutting Lenght 300 mm, Motor 1.5 kW, Shaves Suction Motor 1.1 kW
CALIBRATING TABLE BATTENFELD K 160 V2, 2 Speck v-pumps 4 kw / 2 sections, 16 x vacuum-connections, 12 x water-connections, Blower for drying, HAUL OFF BATTENFELD P 100 SV, 2-belt haul-off (type caterpillar), Contact 1.200 x 160 mm, Speed approx. 0,5 – 15 m/min., Motor-power approx. 4 kw, Pulling-power approx. -6.000 N maxi., SAW BATTENFELD SPR 32 P, Profile-saw upstroking, Blade Ø 300 mm, Chip/dust-suction, control panles,, Electric manuals available
VOBAU PROFILE DOWNSTREAM EQUIPMENT, Max Profile Section 250 x 100 mm,, Maximal Traction Force 20 kN, Maximal Speed 8.5 m/min, CALIBRATOR - 4000, Fixing Surface Calibration Tools 4.000 x 400 mm, 3 Vacuum Pumps 5 kW Each, Adjustments :, Longitudinal Lenght , Vertical Motorized,, Lateral Manual ., HAUL OFF - 175, Oscillating Pneumatic Top , Manual Down,, Carterpillers Adjustment, Carterpiller Length 175 x 2300 mm, 2 Gears Motors 2.2 kW , Each, Inverter Control , Maximal speed 8.5 m/min, SAW - 450, Ascending Saw , Suction Shaves, Translation Trolley Cut - 600 mm, Disc Ø 450 mm, Motor 2.5 kW, Tilting Table ., availability: immediate
USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.
SCM edgebander mod. Used OLIMPIC K1000 control panel with membrane keypad Technical data: Min. height of the panel 8 mm Max. panel height 55 mm Min. thickness of the edge in roll 0.4 mm Max. edge thickness in roll 3 mm Max thickness of wooden edge mm. 12 Composition: Strip edge stock Glue tank capacity kg. 1.5 with independent motor Nr. 4 counterpressure rollers with pneumatic thrust and 1st roller with independent motor Shear cutting edge in roll Trimming unit with 2 independent motors tilting 0-15° - each KW 0.35 - 12.000 rpm Overlapping trimming unit with 2 motors each KW 0.65 - 12.000 rpm - tools with reversible knives Tilting gleaning unit for flat-edge and radius finishing; r. 2 motors each KW 0.5 - 12,000 rpm with electro-pneumatic positioning - tools with reversible knives electropneumatic group override Glue scraper assembly ...
Key data: 1500 kN
Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.
This is a LOMA Systems IQ-series industrial metal detector, commonly used in food and dairy processing lines. Here’s a clear, practical breakdown of what it is and what it does., Its job is foreign body detection — specifically metal contamination — to protect:, - Product safety, - Equipment (pumps, fillers, valves), - Brand and compliance (HACCP, BRC, IFS, etc.), You’ll typically find these on:, - Dairy products (cheese, butter, powders), - Ready meals, - Meat & poultry, - Bakery, - Packaged foods on conveyors, What metals it detects, The IQ range detects all three common metal types:, - Ferrous (iron, steel), - Non-ferrous (brass, aluminium), - Stainless steel (the hardest to detect in food environments), Sensitivity depends on:, - Aperture size, - Product type (wet/dry, salt content), - Conveyor speed, - Calibration, The LOMA IQ control system, The LOMA IQ® controller you sho ...
BIESSE ARTECH edgebander mod. Used Akron 430 A T Technical data: panel length min/max mm. 140-3200 panel width min/max mm. 85-3200 panel height min/max mm.10-60 edge thickness in rolls min/max mm. 0,4-3 Edge thickness in strips min/max mm. 0,4-8 edge height min/max mm. 14-64 work line height mm. 900 protrusion of the panel from the towing track mm. 25 Towing track forward speed 12 m/min Suction air speed 30 m/sec Supply pressure 7-10 bar SINTRA LT Control entrance guide with mechanical visor -Correction group: nr. 2 KW 1.8 motors with skid copiers Vertical adjustment of tool position - Gluing unit: glue tank capacity kg. 2 nr. 3 compressed air back pressure rollers Numerical display Edge thickness - Shear unit with 2 thrust pressure positions according to the thickness of the edge - Automatic strip edge loader - Trimming unit : nr. 2 motors KW 0.50 copier with ski ...
Nominal capacity 1300kg, lifting height 195mm, Maximum battery capacity: 36Ah, voltage 24V, maximum speed 4.8km/h, CE certificate present Auction-ID: A1-45663-9
Professional equipment Set of 2 fridges with double doors with Dixell digital thermostat and Cubigel compressor Automatic defrost. The seller is not equipped to help move the equipment. No delivery possible. Auction-ID: A3-43515-35552
3 Floodlights 1000W Outdoor suitable IP54 230 V Auction-ID: A1-45889-2687
4 Floodlights 1500W Outdoor suitable IP54 230 V Auction-ID: A1-45889-2684
The real estate compendium consists of two distinct cadastral units: Housing unit (cat. A/4), of about 100 m², located on the first floor, consisting of kitchen, bathroom and three bedrooms. Ancillary room/cellar (cat. C/2), located on the ground floor, of about 50 m², with an internal height of 4.00 m and direct access from Via Mazzini. The surfaces were taken from the cadastral plans. State of conservation: The warehouse is free, in its raw state, with a load-bearing masonry structure and without systems. The apartment is free and is in good general condition; It was renovated about 35 years ago and has no obvious deterioration of the structure. It is equipped with water, electricity and gas systems, as well as a recently installed natural gas boiler. Cadastral data: Land Registry of Buildings – Sheet 113, Particle 379: Sub. 1, cat. C/2, class 2, consistency 48 m², ...
pressure:30 t throat:110 mm stroke:50 mm no. of strokes:35 - 80 /min distance table/ram, max. stroke up, adjustment up:230 mm table surface area:410 x 260 mm table height over floor:790 mm passage to the back:170 mm ram surface:190 mm ram adjustment:35 mm weight:1,3 t dimensions (WxDxH):1,0 x 1,1 x 1,8 m German Safety: moving screen:UVV 11.062 - VBG 7n5.1 § 6
TP13 Mini Crawler Excavator With Canopy A Digging Bucket 40cm Red Color Engine Rato Gasoline 420 8.6kw Rubber Tracks Auction-ID: A1-45995-26
a digging bucket 40 cm diesel engine laidong Engine 18 kw 3 cylinders joystic controls orange rubber tracks Auction-ID: A1-45995-13
a digging bucket 40cm, thumb and blade, single cylinder Koop diesel engine 7kw yellow color rubber tracks Auction-ID: A1-45995-5
a digging bucket 40 cm diesel engine laidong Engine 18 kw 3 cylinders joystic controls orange rubber tracks Auction-ID: A1-45995-12
Technical data & dimensions: • Manufacturer: Alois Praschberger Rolltechnik & Sport • Model: Monoski (serial no. 960135) • Seat width (inside): 32 cm (ideal for narrow hips / teenagers / petite adults) • Seat depth: 45 cm • Accessories: Includes original Superlite outrigger (crutch skis) for optimal balance and control. • Condition: Used, technically sound impression with high-quality suspension system. Auction-ID: A7-46327-7
TP18 Mini Crawler Excavator With Canopy A Bucket Digging Orange Color R740D Engine 15.8kw Rubber Tracks Auction-ID: A1-45995-29
TP13 Mini Crawler Excavator With Canopy A Digging Bucket 40cm Red Color Engine Rato Gasoline 420 8.6kw Rubber Tracks Auction-ID: A1-45995-28
Kit of 2 buckets (1 digger 20cm, 1 ditch cleaner 80cm) and 1 auger diameter including hydraulic motor diameter 20cm Auction-ID: A1-45995-34
with closed cab a digging bucket 40 cm , inch, single cylinder engine Koop diesel 7kw red color rubber tracks Auction-ID: A1-45995-2
TP13 Mini Crawler Excavator With Canopy A Digging Bucket 40cm Red Color Engine Rato Gasoline 420 8.6kw Rubber Tracks Auction-ID: A1-45995-27
a digging bucket 40cm, thumb and blade, single cylinder Koop diesel engine 7kw yellow color rubber tracks Auction-ID: A1-45995-4
maximum number of results exceeded
please refine your search
