Control Heidenhain TNC620 Travel X/Y/Z [mm] 4100/420/300 Tool pick-up SK40 General: Designation Autom. Profile Machining Center AP-B 4000 Machining length 4,000 mm Travel X/Y/Z 4,100 / 420 / 300 mm Machine hood: Machine hood can be opened pneumatically upwards Operation: Operating terminal can be moved over the length of the machine Control: CNC control Heidenhain TNC 620 Additional control: Heidenhain handwheel HR130 Table specification: T-groove strips size 16, mounted longitudinally to the X-axis Bearing surface: 4,200 x 420 mm Spindle: Engine power: 14 KW S1/19 kW S6 Engine cooling: water with additive Speed range: 100 to 14000 rpm Torque: 74 Nm S1 / 100 Nm S6 Drilling capacity in St 60/Alu: 25 mm/30 mm Thread in St 60/Alu: M20/M30 Tool magazine: Tool holder: SK 40 Tool clamping system: Spring package pull-in force 9 KN Version: 12-fold disc magazine Cha ...
Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm
Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg
Double Head Welding Machine Urban Plastic Window Welding Machine Type: AKS 4110 Year of Make: 2/91 Working length max. 3090 mm Connected load 6.5 kW Operating pressure 8 bar Air requirement per weld 15 l Electronic temperature control Welding level 0 – 300°C Electronic temperature control Welding limitation 35 – 65°C - Heated blade welding bead limitation 2 mm - Welding of 2 corner joints at an angle of 90° in one operation. - Fast and accurate insertion of the profile thanks to the automatic welding head feed. - Automatic weld adaptation to different profile cross-sections - Safety clamping systems that automatically adjust to different profile heights. - Guide elements made of hardened, ground shafts with recirculating ball bushings. Machine dimensions: L 4015 mm x W 1100 mm x H 1840 mm Weight: 790 kg
Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller
Year: 2011 - technically efficient, ready to work – after full service - WT 535B automatic rotary station - disc cutter: 250 mm - windows PC control - profile recognition system - for turning tools on and off as needed - extensive tool equipment
- technically efficient, ready to work – after full service - drilling for the bottom hinge - automatic screwdriver + ASS 60 screw feeder - punch holder - centring system - steering stop for trimming the stay - tilting table - shelf
Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table
Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table
Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process
URBAN AMS 6010 very good condition fully operational
CNC machining center from Urban Control: Heidenhain Track Control iTNC 530 4-axis Travel x/y/z – axis 7200 /450 /590 mm Working range x/y/z axis 7000 / 400 /350 mm Weight 14 t Equipment: Robust basic structure as a welded frame construction Ball rail guide on all axes Milling spindle unit: 100-12000 rpm, tool holder SK 40 Drives: X-axis 50 m/min by rack and pinion drive Y/Z axis 25m/min by ball screw B-axis 9000°/min Control panel swivels Automatic central lubrication Moving tool changer for 12 tool holders SK40 Cooling emulsion plant, machine people, security fence Electronic handwheel integrated into the control panel Chip drawers, laser scanners, minimum quantity lubrication Technical data see pictures.
Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers
Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping
Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table
Urban 4 m bed milling machine SK40 against bid. Slightly used, was only rarely used! In February 2023, the machine was set up and put into operation by the company Urban and has only very few operating hours. As an accessory, the machine has a pick-up station including angular head drive. Bids from the Dossenheim location.
Key data: 5000 mm, 275 mm, 310 mm
Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...
Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60
Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm
Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)
We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines
Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...
Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible.
%20(1).jpg)
