upright lift used for sale

hydraulic motor, oil motor, hydraulic pump -Manufacturer: GSL (German Standard Lift), Hydraulic pump for driving work platforms -Type: 730-0080-130-002 -Drive shaft: Ø 25 x 40 mm -universally applicable -Number: 1x engine available -Price: per piece -Dimensions: 240/135/H130 mm -Weight: 13.2 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 480 mm -Type: E030ZM2 R 16 -Piston rod: Ø 30 mm -Hole: Ø 24 mm -Dimensions: 545/82/H60 mm -Weight: 6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), Hydraulic cylinder: 480 mm -Type: E030ZM50479 S 49 -Piston rod: Ø 30 mm -Hole. Ø 20 mm -Number: 3x cylinders available -Price: per piece -Dimensions: 605/100/H80 mm -Weight: 6.8 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder with valve block -Type: D040025AAV10140 T08 -Stroke: 140 mm -Piston rod: Ø 25 mm -Receiver. Ø 20 mm / Hole spacing 320 mm -Dimensions: 360/200/H80 mm -Weight: 7.6 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV30290 S46 -Stroke: 290 mm -Piston rod: Ø 50 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H220 mm -Weight: 38 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D0630320LV2S01 -Stroke: 95 mm -Piston rod: Ø 32 mm -Hole diameter 30 mm / hole spacing 290 mm -Dimensions: 340/117/H105 mm -Weight: 8 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -mount. Ø 19 mm -Dimensions: 395/83/H70 mm -Weight: 4.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV70290 -Stroke: 290 mm -Piston rod: Ø 50 mm -Pipe Ø outside: 135 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H240 mm -Weight: 38 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 280 mm -Type designation: E030ZM3 R 01 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2x cylinders available -Price: per piece -Dimensions: 350/75/H76 mm -Weight: 3.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV90185 -Stroke: 185 mm -Piston rod: Ø 50 mm -Hole diameter 40 mm / hole spacing retracted 415 mm -Dimensions: 485/160/H145 mm -Weight: 29.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), single-acting hydraulic cylinder, stroke 170 mm -Type: E0400180H30020 T17 -Piston rod: Ø 18 mm -Tube: outside Ø 50 mm -Hole: Ø13 mm -Dimensions: Ø 50 x 275 mm -Weight: 2.9 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: GSL German Standard Lift, 5-hole steel rim -Type: 6.50F-10 ET-17 604700 -Hub bore: Ø 67 mm -Bolt circle: Ø 112 x 15 mm -Quantity: 8x rims available - Price: per piece -Dimensions: Ø 298 x 195 mm -Weight: 7.7 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 50 mm -Pipe outer diameter: 75 mm -Stroke: 500 mm -Total length when retracted: 730 mm -Piston rod mount: Ø 44 mm ball head -Hole diameter: Ø 30 mm -Quantity: 5 available -Price: per piece -Ideal for building a hydraulic press

Vacuümhefunit - Type: V01174 - Maximaal hefvermogen bij 60% werkvacuüm: 1650 kg - Gewicht: 700 kg - lengte: 10,3 meter - breedte: 500 mm - hoogte: 950 mm

A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK -Pmax: bar -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

Upright stack delivery with pressing unit; working condition

Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Travel X/Y: 600mm/400mm, table dimensions X/Y: 800mm/400mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/2350mm, weight: approx. 2500kg, control: 2-axis digital readout Heidenhain (retrofitted). Including various accessories. On-site inspection is possible.

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm

throat:640 mm total power requirement:1,6 kW weight of the machine ca.:450 kg dimensions of the machine ca.:1000 x 600 x 2100 m table-size:455 x 380 mm chuck::MK 3 working area:355 x 280 mm

Properties: Volume 1500 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1500 mm Cylinder height 1800 mm Diameter width 800 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description: Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 forward-drawn residual drain pipe with disc valve DN 32 4 feet

Properties Volume 1530 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1300 mm Cylinder height 1800 mm Diameter width 850 mm Inner diameter 2000 mm Surface on the outside marbled at the front Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 430 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet

Two similar Snow column drilling machines are available. 1) Snow TA-3, speed: 700rpm, table dimensions X/Y: 460mm/270mm, vertical table adjustment: 255mm, spindle taper: MK1. 2) Snow TA-3-S, speed: 1000rpm, table dimensions X/Y: 460mm/270mm, spindle taper: MK1. An on-site inspection is possible.

A small column drilling machine Optimum is available. Drilling capacity steel/cast iron: 30mm/35mm, spindle mount: MK4, speed: 2000rpm, quill stroke: 120mm, quill diameter: 75mm, column diameter: 115mm, table dimensions X/Y: 500mm/420mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/1950mm, weight: approx. 220kg. An on site inspection is possible.

A column drilling machine Alzmetall with a rotating round table is available. Drilling capacity steel/cast iron: 45mm/50mm, reach: 345mm, tool holder: MK4, speed: 720rpm. Machine dimensions X/Y/Z: approx. 1100mm/600mm/2000mm, weight: approx. 650kg. An on-site inspection is possible.

High-bay pallet racks steel blue approx. 18 stands, each total approx. 600x120t cm, uprights partly connected, approx. 84 trusses each approx. 270b cm, approx. 12 trusses each approx. 180b cm, wooden inserts, ATTENTION: Removal only possible via the window - inspection recommended for removal, no aerial platforms or aerial work platforms on site! Location 1st floor

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Pallet racking: boltless racking, heavy-duty racking / 34 uprights and 104 crossbeams -Stand depth: 1100 mm -Stand height 4100 mm: 2 pieces -Stand height 3500 mm: 13 pieces -Stand height 2000 mm: 19 pieces -Crossbeams, length 2760 mm: 93 pieces -Crossbeams, length 1890 mm: 11 pieces -Dimensions/Quantity: see photo parts list -Submission/Price: complete -Transport dimensions: 6950/2250/H1460 mm Total weight: 4380 kg

UpRight AB46 - Rothlehner RGT 1600 E aerial work platform. Battery must be replaced (4x car battery à ́150,-€ is enough) Various leaks on the control block but easily repairable! Auction-ID: A1-45733-10

bore capacity in steel (diameter):12 mm throat:300 mm bore stroke:80 mm total power requirement:1,5 kW weight of the machine ca.:1,2 t dimensions of the machine ca.:0,6 x 0,7 x 2,1 m Appr. 100 year old column boring machine, complete overhould and ready to operate - swivel table, base table - taper tool chuck - base motor with drive belt to overhead spindle

Battery empty. Auction-ID: A1-45690-12

Mec 2047ES Scissor Lift 4 x new Crown Deep Cycle lead-acid batteries CR-225 HD (as of 06.10.2023) Brand: MEC Model: 2047ES Type: Scissor Lift Year of construction: 2006 Working height max. 8.10 m Platform height max. 5.98 m Platform height – retracted 1.62 m Platform extension 0.91 m Platform width – outside 1.15 m Platform length - outside 2.31 m Platform length - extended outside 3.39 m Railing height 1.10 m Height of skirting board 0.15 m Height – retracted: Folding railing 2.10 m Height – retracted: railing folded down 1.62 m Length - retracted 2.51 m Length - with extended platform extension 3.33 m Width 1.19 m Achievement Max. people on the platform (indoor/outdoor) 2/2 Load capacity 567 kg Load capacity - platform extension 113 kg Movable up to a height of 5.98 m Travel speed - retracted 4.0 km/h Travel speed - extended 1.0 km/h Gradea ...

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Hydr. Scissor lift table WEIDMANN type E5/13-1Fabr. No. 30403339 Year of construction 1982 / 2007Load capacity 500 kgPlatform size 2000 x 1200 mmStroke max. 1280 mmOverall height - table bottom 290 mmOverall height - table top max. 1570 mmTable height with safety support 1430 mmLifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 barEngine power 1.5 kWNex connection 400 volts, 50 Hz.- Rotary switch switch on the hydraulic power unit for up and down lowering speed

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SOFabr. No: 124984 year of construction 2017Load capacity 300 kgPlatform size 1250 x 800 mmUsable stroke max. 785 mmOverall height - table bottom 345 mmOverall height - table top 1130 mmEngine power 0.8 kWNet connection 400 volts, 50 Hz- Foot switch for up and down, with emergency stop and key switch for control One- Single scissors with a lifting cylinder- Circumferential safety contact strip with limit switches under the upper frame- Adjustable limit switch for the upper stroke restriction-

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/RjFS2NQ29J4 - Former Linde full-service device - valid service until 03/2027 - UVV valid until 03/2027 - Battery: 09/2014, 24V Ah, good performance measured with 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale Auction-ID: A1-45449-333

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/BeUnCendmDs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 25.3V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45449-306

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/mC3Ktrhu2oE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 06/2021, 24V 3PzS 375Ah, very good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45449-364

Edmo Lift Hydraulic Scissor Lift Table, Load Capacity 2000kg, Lifting Height: 1000mm Auction-ID: A7-45416-114

Battery empty. Auction-ID: A1-45690-4

Battery empty. Auction-ID: A1-45690-2

Lifting and Turning Device for beverage paper roll consists of: Jumbo Reel Lifting and Turning Device for beverage carton paper rolls, your choice: manual (manufacturer BT), with battery electrical lifting (manufacturer Tetra Pak)or with battery electrical lifting and autom. hydr. turning (manufacturer BT)

Load 150 kg

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

HIDRAL EH-1500 goods lift was manufactured in 2013. The steel-framed goods lift is used in halls and warehouses where the transport of heavy goods between floors is needed. Powered by a hydraulic cylinder, the crane allows the movement of goods with a total weight of 1000 kg between three stops, located at levels 0mm, 2800 mm and 5500 mm. The platform is installed in a shaft with dimensions (L x W x H) of 1700 x 1560 x 8155 mm and moves at a speed of 0.2 m/s. It is controlled by a relay. Technical parameters of HIDRAL EH-1500 goods lift - level heights corresponding to the floor level: R0 – 0 mm, R1 – 2800 mm, R2 – 5500 mm - lifting capacity: 1000 kg - platform speed: 0,2 m/s - lifting height: 5,5 m - number of stops: 3 - platform shaft: steel structure clad with trapezoidal sheet metal - shaft dimensions (L x W x H): 1700 x 1560 x 8155 mm - type of control: relay -  ...

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3