134,400 used machines on RESALE, but how to find them? Machine Search
equipped with detachable filling spindle Auction-ID: A1-49836-66
Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight
Working. Can be loaded. Auction-ID: A3-46156-6170
Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co.Year of construction approx. 1980Load capacity approx. 5 ton. Platform size 1700 x 1100 mmStroke max. 515 mmOverall height Table bottom with rail rollers 535 mmOverall height Table bottom without rail rollers 480 mmTable height raised with rail rollers max. 1050 mmTable height raised without rail rollers max. 995 mmTravel speed rail chassis approx. 8.5 meters/min. Motor power 4 kWNet connection 400 volts, 50 Hz hand switch for up and down on the cable safety limit switch
Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and
Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with
Type: SWE140 Maximum lifting height: 3655 mm Maximum lifting capacity: 1400 kg
Auction-ID: A1-50026-45
Auction-ID: A1-40311-167
Battery of 2020 Auction-ID: A1-40311-90
Auction-ID: A1-40311-149
E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used
Auction-ID: A1-40311-54
Auction-ID: A1-40311-159
Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic
Auction-ID: A1-40311-99
Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -
Lift table HANDY type 1250E Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
Lift table HANDY type 1250E - No 2 Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
Vaccum Lifting Device COVAL VAC 12 FH Year of construction: 2012 Maxi loading capacity: 80 KG Suction cups diameter: Ø 150 mm Maxi spacing: 910 mm Mini spacing: 350 mm In very good condition Voltage: 380 V Dimensions (L x W x H): 1100 mm Depth: 900 mm Total height on frame: 1000 mm Total weight with support: 100 KG
Working height: 8100mm, platform height: 6100mm, load capacity: 360kg, platform dimensions X/Y: 2300mm/760mm, transport length: 2300mm, weight: approx. 1970kg, operating hours: approx. 556h. An on-site inspection is possible.
K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg
Lifting kneader KEMPER, type: F 75 ASL -overhauled- - for 75 kg flour or 120kg dough - incl. 2 tank cars - Incl. dust cover - Condition: technically very good, ready for immediate use -Refurbished - 6 months warranty Visits and test runs are possible by arrangement.
weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load capacity: 3.5t, permissible gross weight: 10500kg, operating hours: approx. 4538h. An on-site inspection is possible.
Used DIOSNA Lifting Kneader, Type: S 35 2G -In Bakery Condition- - for 35 kg dough or 20 kg flour - 2 speeds - Foot switch to turn on -Protective - Machine runs very smoothly - Technically tested and cleaned - Machine repainted - Kneading arm and kettle made of stainless steel Inspection and test run are of course possible by arrangement.
weight max. in kg: 2000 kg table length: 1300 mm stroke height: 190-1010 mm table width: 800 mm stroke of worktool slide: 22 mm/sek. weight: 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used DIOSNA Lifting Kneader, Type: S 20 3G -In Bakery Condition- - for 20 kg dough - 3 courses - Rewired - Engine Newly Mounted - New V-belt - Machine repainted - Kneading arm and kettle in stainless steel - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.
carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the cente ...
Handtmann vacuum filling machine with lifter for 200 liter meat bins, type: VF616, number: 29150, year of construction: 2011, 400 V, 50/60 Hz, 7.2 A, 6.0 kW, Busch vacuum pump, type: KC 0016 E 320, capacity: 19 m³ per hour, dimensions: 2000 mm x 1400 mm x 2000 mm.
length: 1000 x 600 x 300 mm table load: 300 kg total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg dimensions of the machine ca.: 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Krämer + Grebe bowl cutter with lifter for 200 liter meat bins and ejector, type: VSM325, machine number: 173/283, 400 V, 3 Ph, 50 Hz, 120 kW, capacity: 325 liter, s/s bowl, dimensions: 3000 mm x 2800 mm x 1900 mm. Including switch cabinet.
Laska double shaft Z-arm vacuum mixer with lifter for meat bins, type: ME-250, serial number: F-1230, 380 V, 50 Hz, 13 A, 2.5 A, capacity: 250 liter, dimensions: 1500 mm x 1300 mm x 1900 mm. Dimensions switch cabinet: 800 mm x 300 mm x 800 mm.
Laska lifter for 200 liter meat bins, type: BA 27, machine number: 21229, year of construction: 2023, 400 V, 3 Ph, 50 Hz, 1.5 kW, 3.5 A, weight: 350 kg, dimensions: 950 mm x 1300 mm x 3400 mm.
maximum number of results exceeded
please refine your search
10 € 
