up 500 used for sale

Level lifter, lift table, fork lift table, lifting platform WTT FÖRDERTECHNIK GmbH 411S load capacity: 500 kg lifting fork 1140 mm long, flush width: 820 mm stroke: approx. 680 mm height retracted: approx. 80 mm height extended approx. 770 mm electro-hydraulic lifting function 180 bar 380 V with foot switch mobile through 2 rollers ! used, tested ! Dimensions: 1550 x 980 x 1280 mm (retracted)

Diaphragm accumulator, pressure accumulator BOSCH 0 531 602 500 ( 0531602500 ) Content: 0.7 liters zul. Operating pressure: 180 bar zul. Operating temperature: 80°C New ! Dimensions: 180 x 122 x 122 mm

Hand lever pump, hydraulic pump, hand pump LUKAS HYDRAULIK Gmbh ZPH 1A/1 PN500 841200120 Pressure: max. 500 bar Flow rate per stroke (low pressure): 10 cm3 Flow rate per stroke ( high pressure ): 1.6 cm3 Automatic switching (low pressure to high pressure): at 100 bar tank capacity: 1.3 l usable quantity: 1.1 l with documents ! used, tested ! Dimensions: 710 x 210 x 175 mm

Hydraulic cylinder, double-acting PARKER CTD-3LRL18M piston diameter: Ø 38,1 mm Rod diameter: Ø 15.9 mm stroke: 500 mm rod thread: M12 x 1.5, length: 15 mm flange: 51 x 50 mm bolt circle: Ø 52 mm 8x stud bolt: M6 x 1.0, Length: 20 mm used, tested ! Dimensions: 680 x 52 x 52 mm

Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Load capacity: 12,500 kg Crane track average: 13,600 mm Cat track average: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min stroke: 5 / 0.8 m/min hook travel: approx. 5.8 m with test book and documentation ! Dismantled ! used, tested ! Dimensions: mm

Column-mounted slewing jib crane, wall-mounted jib crane PAGUS Lifting capacity 500 kg Projection: 2000 mm Clear height: 3000 mm total height: 4000 mm < br /> electric chain hoist with rolling chassis BALKANCAR BO62 MD Load capacity: 250 kg Lifting speed: 0.066 / 0.066 / 0.0 02 m/s lifting height: 3200 mm 380 V used, tested ! Transport dimensions: 4000 x 600 x 1000 mm

Trolley, trolley, manual trolley HOFFMANN FÖRDERTECHNIK GmbH WURZEN LIFTKET load capacity: 500 kg beam width: 50 - 106 mm Bolt diameter: Ø 24 mm see also K137 ! used, tested ! Dimensions: 210 x 200 x 140 mm

Electric Chassis, Rolling Chassis, Trolley HOFFMANN FÖRDERTECHNIK GmbH WURZEN LIFTKET Load capacity: 500 kg Travel speed: 5 / 20 m/min Beam width: 50 - 106 mm Bolt diameter: Ø 24 mm Motor:ABM EFB2/G71F/4KD71B4X-8/2 0.04 / 0.18 kW 222 / 1018 rpm 220 / 380 V 3AC 50 Hz IP54 see also K136 ! used, tested ! Dimensions: 670 x 230 x 170 mm

Hook harness, bottom bottle, crane bottle, hook bottle DEMAG 500 kg DEMAG-V-2 PS BA ( DEMAG-V-2PSBA ) Chain diameter: Ø 6 mm chain link width: 12 mm with single hook New ! Dimensions: 170 x 80 x 60 mm

Electric chassis, rolling trolley, trolley SMALL HEISTS WURZEN Load capacity: 500 kg Travel speed: 24 m/min Driving wheel: Ø 70 mm beam width: approx. 60 - 120 mm Engine: VEM KMO 56 K 4 - 19 ( KMO56K4 -19 ) 220 / 380 V 3AC 0,1 kW 1360 rpm New ! Dimensions: 340 x 300 x 190 mm

Tool cabinet PAGUS 450 x 470 x 870 mm (usable size) door opening: 450 x 850 mm 1 x drawer: width: 380 mm, depth: 450 mm, height: 85 mm 2 x shelf: 450 x 430 mm (height adjustable) with key, different bumps ! used, checked ! Dimensions: 510 x 500 x 1010 mm

Storage bin, open fronted storage box, 20 pieces ARCA SYSTEMS 45360100 500 x 188 x 80 mm (external dimensions) made of plastic with two separating elements used, tested ! 20 pieces ! Dimensions(Packed): 1000 x 400 x 400 mm

Scissor lift table with roller conveyor TREPEL Type: E 5 / 8 / 0 ( E5/8/0 ) Load capacity: 500 kg track length: 1300 mm web width: 950 mm number of rollers: 13 roller diameter: Ø 89 mm height ( retracted ): 800 mm motor ( hydraulic power pack ): 0.75 kW 230 / 400 V 3AC used, tested ! Dimensions: 1335 x 1100 x 810 mm

Dividing head with 3 jaw chuck and centering point PAGUS Ø 375 mm center height 500 mm pitch 24 with counter tip Heavy version, 530 KG Dimensions 900 x 660 x 900 mm

tilting table, clamping table STANKO Model 370-P clamping surface: 500 x 200 mm approx. 45° tiltable without graduation 3 grooves groove width: 12 / 21 mm groove depth: 18 mm used, checked ! very good condition ! Dimensions: 520 x 210 x 105 mm

ISO cylinders, compact cylinders, pneumatic cylinders, double-acting SMC CP96SDB32-500C Piston diameter: Ø 32 mm stroke: 500 mm rod diameter: Ø 12 mm rod thread ( inside ): M10 x 1,25, length: 20 mm max. 1.0 MPa ( 10 bar ) New ! Dimensions: 645 x 46 x 46 mm

Pneumatic cylinder with pivot pin FESTO DNGZK-125-500PPVA 34446 stroke: 500 mm rod diameter: Ø 32 mm pmax: 10 bar with approx. 1.5 m hose and sensor cable ! used, checked ! Dimensions: 910 x 210 x 185 mm

Pneumatic cylinder ORSTA ND6,3A 100x500 TGL 20744 Piston diameter: Ø 100 mm Rod diameter: Ø 25 mm stroke: 500 mm New ! Dimensions: 740 x 135 x 135 mm

Pneumatic cylinder ORSTA Pn1A 63x500 B TGL 20747/02 Piston diameter: Ø 63 mm Rod diameter: Ø 20 mm stroke: 500 mm New ! Dimensions: 720 x 80 x 80 mm

Pneumatic cylinders, standard cylinders FESTO DNG-125-0500PPV-A 30006 stroke: 500 mm rod diameter: Ø 32 mm pmax: 12 bar used, tested ! Dimensions: 790 x 150 x 160 mm

Welding table with fume extraction ARMATURENWERK ZITTAU G-61/1 800 x 500 mm with fan Q 1600 m3/h 0,45 kW 220 / 380 V upper or/ and lower suction adjustable used, tested ! Dimensions: 870 x 900 x 1100 mm

Compact radiators, valve compact radiators PURMO Type: V-22-3-05 Length: 05 Construction height: 3 Dimensions(radiators): 500 x 102 x 300 mm New ! in original packaging ! Dimensions: 550 x 310 x 110 mm

Repair kit SAMSON DN200-500 Package Kit: 1120-2419 Form Standard: PTFE - Carbon, spring-loaded Graphite seal: 8414-2549 Size: 260 x 290 x 1.5 - 316 (L) with metallic support New, with documents ! Dimensions ( packaging ): 490 x 400 x 135 mm

Retaining ring, 5000 pieces NEEDLE AND PUNCHING PLANT LIMBACH-OBERFROHNA Size 12 x 1 TGL 0-471, DIN 471 for shaft diameter: Ø 12 mm (nominal diameter ) Material: burnished steel 10 bags of 500 pieces each Other quantities on request ! New ! Dimensions ( bag ): 190 x 140 x 10 mm Dimensions ( packaging ): 200 x 150 x 50 mm

Sample mixer PAGUS 500 pulses / min operating voltage: 220 V 1AC 50 Hz diameter sample container: Ø 39 mm operating modes: continuous operation, operation with timer ( max. 60 min ), operation with counter geared motor: VEM, ELMO HARTHA Type 1308.2/3 0.75 A 250 rpm 220 V 1AC 50 Hz Counter: UEK 124/15-2 approx. 1.2 m connection cable used, tested ! Dimensions: 350 x 250 x 280 mm

Assortment Erlenmeyer flask, narrow-necked flask, 17 pieces JENAER GLAS, TGI Technical glass Ilmenau RASOTHERM 7x 500 ml Dimensions: Ø 105 x 177 9x 300 ml with stopper Dimensions: Ø 89 x 151 mm ( without stopper ) 1x 200 ml with stopper Dimensions: Ø 79 x 134 mm ( without stopper ) New ! Dimensions ( packaging ): 570 x 410 x 200 mm

welding table, straightening table, straightening pad, work table, clamping table test plate, spotting plate, test ruler, spotting ruler WMW working surface: 500 x 100 mm TGL 7680 height: 120 mm used, tested ! Dimensions: 510 x 100 x 120 mm

Torque Transducer, Torque Sensor KISTLER Type 5413-1407 Art. -No.: 90380104 Measuring range: 0 - 500 Nm connection cable: approx. 5.0 m, with plug square holder: 19 x 19 mm ( 3/4 inch ) with fixed measuring shaft used, tested ! Dimensions ( without cable ): 102 x 59 x 50 mm Dimensions (packaging): 250 x 250 x 60 mm

Scissor lift table, scissor lift table, scissor lift, scissor lift -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Retracted dimension: 450 mm -Measure extended: 600 mm -Attention stroke only: max. 150 mm -without control -Number: 7x lifting tables available -Price: per piece -Own weight: 700 kg/piece

Scissor lift table, scissor lift table, scissor lift, scissor lift -Load capacity: 500 kg -Platform: 5000 x 800 mm -Height retracted: 250 mm -Height extended: 1050 mm -Max. Stroke: 800mm -Own weight: 400 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Rathgeber, transformer type ET 320 -Power: 500/1100VA -Technical data: see photo identification plate -Number: 1 x transformer available -Price per piece -Dimensions: 135/120/H120 mm -Weight: 6.4 kg/pc.

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 500mm -Length: 11900 mm -Thickness: mm -Quantity: 1 piece available -Transport dimensions: 500/270/H230 mm -Weight: 11.3kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

High speed counter 25/500 kHz, PLC control -Manufacturer: Siemens, Simatic S5 Counter -Type: 6ES5 385-8MA11 -Number: 3x module available -Price per piece -Dimension: 100/45/H135 mm -Weight: 0.2 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: FAG, hydraulic pump hand pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 3x hand pump available -Price per piece -Dimensions: 660/170 / H200 mm -Weight: 6.8 kg/pc.

Spur gear pulley block, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley, bottom flange trolley -Load capacity: 5000 kg -Stroke: 4.0 m -Dimensions: 500/400/H800 mm -Weight: 165 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120 SO -Stroke: max. 500 mm -Piston: Ø 40 mm -pneumatically operated -p. Max. Pressure 8 bar -Number: 8x cylinders available -Price: per piece -Dimensions: 800/70/H100 mm -Weight: 5 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -with electric driving unit via: frequency converter -Load capacity: 500 kg -Platform: 1500 x 800 mm -Dimension retracted: 310 mm -Dimension extended: 1000 mm -Max. Stroke: 690mm -Transport dimensions: 1500/800/H310 mm -Own weight: 234 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 8.5 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 4x available -Price: per piece -Dimensions: 320/235/H185 mm -Weight: 23 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 500 kg -Lifting speed: m/min -Lifting height: 3.8 m -with: service -Dimensions: 580/330/H490 mm -Weight: 100 kg

Electric heating plate, heating plate, heating element, preheating plate, warming plate -Manufacturer: ELKOM, electric heating plate -Type: 700x500mm -Heating power: 1000 W -Voltage: 230V -Dimensions: 700/500/H50 mm -Weight: 18.8 kg

Skate Wheel Expandable Conveyor 1.120- 4.500 mm. long More then 300 machines new and second hand on our seema .de

Column slewing crane, hall crane, workplace crane -Manufacturer: Vetter, column slewing crane type M, load capacity 500 kg -Base plate: Ø 610 mm -Throat: 5,990 mm -Total height: 3,900 mm -Hook height: 2,960 mm -Chain hoist: Mannesmann Demag PK 2 NF -Main stroke: 5 m/min -Fine stroke: 1.25 m/min -Chain length: 3200 mm -Transport dimensions: 6500/1040/H1830 mm -Town weight: 810 kg

Feinzeiger micrometer, without dial gauge Feinmesserfabrik Suhl 500 - 600 mm TGL 15046-1 pitch: 0.01 mm with protective box, dimensions: 890 x 510 x 55 mm used, tested ! Dimensions ( packaging ): 900 x 520 x 70 mm

Feinzeiger micrometer, with dial gauge Feinmesserfabrik Suhl 500 - 600 mm TGL 15046-1 pitch: 0.01 mm with protective box, dimensions: 895 x 510 x 56 mm used, tested ! Dimensions (packaging): 910 x 520 x 70 mm

Shelf box, open fronted storage bin, open fronted storage box, open fronted storage box, 15 pieces PERSTORP storage box system 9000 item no.: 4537 500 x 95 x 80 mm ( external dimensions ) inclusive 45 partition walls Material: Polypropylene, color blue used, tested ! Dimensions ( Packaging ): 600 x 400 x 340 mm

PIV chain PIV DRIVES GmbH 470 x 26 mm Length: 500 mm Width: 26 mm Bolt width: 30 mm New ! Dimensions ( packaging ): 85 x 80 x 30 mm

Description: machine number 20296/21 load capacity at 50% vacuum: 500 kg. dimensions at least 1050 x 1050 mm (suction plate arrangement on the lifting frame) max. 2000 x 2000 mm (with extension arms) material: Lifting frame and extension arms: aluminum, RAL 5003 telescopic boom: steel, galvanized suction traverse: 4 suction plates AL 410G (Ø 410mm) weight: approx. 42 kg diaphragm vacuum pump VAL 0.6, 12 V, 1.5 A, 0.6m³/h (max. volume flow), Max. vacuum 60%. 4 pumps in total energy supply (battery): 2 x 12V / 4.5Ah charging voltage: 230V / 50Hz the device Charging voltage: 230V / 50Hz duty cycle: approx. 300 suction processes per battery charge Service: The vacuum is turned on and off with the vacuum valve For detailed information see PDF file (AERO-LIFT_Auftragsbestaetigung_241693.pdf) serial number: 20296/21, Approx. Onsite Dimension. (l x w x h): 1,050 x 1,050 x  ...