up 500 used for sale

Dimensions (L/W/H): 800x700x500 mm Weight: 100 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Emulsion mixer Volume : 500 ltr. Material : areas in contact with the product in stainless steel;

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Dimensions (L/W/H): 9850x2300x1770 mm Weight: 3480 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

Shuffle-mix 500 mixer / aerator Serial: 500-115 2007, Stainless mixer aerator, 500L, mobile frame, 3Ph

2 Sibre SBH 500/1250/60 Retail sale possible

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C87 TE1PV/Stage 3A Engine No.: in production Power: 259 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L1D D41 Gene. No.: C221374934 Generator power: 310 KVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation IG 500 Switch: Generator switch 4 poles with motor drive Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.400  ...

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 072 A 02 14 ECU Engine No.: in production Power: 440 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm:  ...

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Dimensions (L/W/H): 1950x690x1700 mm Weight: 426 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating cabinet Manufacturer: Memmert Type: UM 500 Properties: Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.

Falch Trailjet 15 Pressure Washer 500bar , 95 °C Mint condition - Manufacturer: Falch - Type: Trail Jet 15 - Registration date 07/21 - Working pressure: 500bar - Volume flow: 15 l/min - Cold and hot water up to 95 °C - Operating hours: approx. 481 h - German papers Accessories: - Optional Price excluding VAT! Net price: 32.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in. CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more.

High-precision and versatile punching/nippling machine Boschert Compact 500 CNC Z (built in 2011) – Ideal for flexible sheet metal processing! We sell a powerful and reliable punching/nippling machine from the quality manufacturer Boschert, which convinces with its extended equipment and precision. This machine is the ideal solution for a wide range of Spectrum of punching and nipple tasks, from individual parts to large series. Features that convince: • Manufacturer: Boschert • Type: Compact 500 500 x 1000 CNC Z • Year of manufacture: 2011 • Intuitive CNC control: Multi-axis Ladob control with graphical user interface for easy Programming and visualization of the machining processes. • Extended working range for greater flexibility: o X-axis: 0 - 2000 mm (allows the machining of long workpieces) o Y-axis: 0 - 750 mm (offers generous space for wide sheets) ...

1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TAD 1641 GE Engine No.: in production Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm: 2.460 ...

Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2

Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'

Key data: 510 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03907 Type of machine Machining Center - Vertical Make MORI SEIKI Type CV 500 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time CALL ME Freight basis EXW (Incoterms 2010) loaded on Technical details X-Travel 510 mm Y-Travel 510 mm Z-Travel 510 mm control MSC 803 number of spindle speeds 8000 spindle drive 7.5 kW Rapid Travel X/Y/Z 42/32 mm/min table-size 750 X 550 mm tool changing time 1.5 sec tool magazine: 25 BT 40 total power requirement 51 kW Weight of the machine approx. 4 t Accessories Memory 640 m Helical Interpolation Cylinder interpolation Additional information ROTARY DOUBLE TABLE CNC MSG 803 Technical details and information subject to amendments and errors.

Transnorm Belt Conveyor 1000-600-500 RA1281 The Transnorm belt conveyor is from 2013 and is in a new (used) condition. It is perfectly suited as a feeding belt and has a reflective light barrier with double lens (SICK WL100 P4430) to control the flow of goods. It has an engine of the brand SEW and MOVIMOT converter to control the speed. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: B11 Built: 2013 Condition: as good as new (exhibition machine) Engine: fully functional Conveyor length (FL): 1000 mm Nominal/outer width (NB):600 mm Usable width (NUB): 540 mm Belt width (GB): 500 mm Engine Type: SEW Gear Motor + MOVIMOT Inverter Motor Power: kW 0.75/S1 Hz 50 A 1.90 Conveyor speed: adjustable from 2 to 90 m/min Drive: Head drive Weight: 80 kg Scope of delivery: without supports (if necessary plea ...

; Gross weight [kg]: 4830; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Weibert BS-500 Wood band saw Cutting height 450mm Swivel -15° + 45° Motor power: 5KW, 400V, 50HZ Band length 4670mm Suction nozzle 2 x 100mm Saw blade width 6 to 40mm Cutting width left 490mm CE marking WJ-X00200

Lippert belt conveyor GF 1090-650-500 RA1425 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2 ...

Dimensions (L/W/H): 1950x690x1700 mm Weight: 451 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 2300-600-500 RA2057 Technical data: Conveyor length (NL): 2300 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2300 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentral ...

Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Lippert belt conveyor GF 22000-650-500 RA1361 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown were taken in a logistics center while still installed. Technical data: Length (NL): 22.000 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT 80 N4 MM07 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum (AT): Ø = 81 mm Belt return roller: Ø = 50 mm Belt type: NNT 10 ENBU year of construction: 2001 Optional accessor ...

Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Defle ...

Lippert belt conveyor GF 1710-650-500 RA1370 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1710 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed: adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1 Deflection roller: Ø = 34 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally available: Suppo ...

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 935 mm -Width: 13 mm -Height: 27 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 1.25 kg

Lippert belt conveyor GF 1285-650-500 RA1378 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1285 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection drum: Ø = 64 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally ...

Lippert belt conveyor GF 630-650-500 RA1478 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 630 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 200 ...

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 500 mm -Rolls: Ø 50 mm -Roll distance: 135 mm -Transport dimensions: 2055/555/H100 mm -Weight: 36 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -Fastening type: Thread: M110 x 6 mm -Weight: 72 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg

Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 ...

Lippert belt conveyor ascending conveyor GF 6960-650-500 RA1459 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6960 mm (ascending conveyor) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Be ...

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 7x saw blades available -Price: per piece -Weight: 6,1 kg/piece

Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (U ...

Lippert belt conveyor flap belt GF 970-650-500 RA1465 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 970 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construc ...

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece