up 500 used for sale

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Drive from forklift: Still type EFG 1.0 / 5002 -Motor: 24 V -Power: 4 kW -Pole circle: O 270 mm M16 -Dimensions: 740/405 / H375 mm -Weight: 157 kg

Ref. -No.: 10201 Manufacturer: AXA Year of construction: 2007 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 5000 mm Y-Travel: 600 mm Z-Travel: 800 mm Machine length: 9400 mm Machine width: 3500 mm Machine Height: 3300 mm Table Dimensions (Lengthxwidth): 6325 x 1050 mm Swivelling: +/-90 ° Numbers Of Tools In Magazin: 120 Turning Speeds: 30-9000 RPM Tool changer: SK 50 Drive Capacity - Spindle Motor: 45 kW Weight Of The Machine Ca.: 23 t Tool change time: 6 s Vertical working height: 0-740 mm Working height horizontal: 250-1050 mm Space requirement (LxWxH): 11000 x 5090 x 3300 mm Feed rate: X/Y/Z: 40 m / min

Shear beam load cell -Nominal load: 500 kg -Nominal value tolerance: %+/- 0.1 -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

NNP 5000L Holding tanks 2004, stainless, 5000l capacity holding tanks, insulated, level detection, three in stock

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

PC CPU, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: PC-CPU-2-083-01-5003 -Type: PC CPU 2083015003 -Number: 1x tax card available -Dimensions: 20/195/H265 mm -Weight: 0.31 kg

CPU Umlade-Ram auxiliary storage, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5004 -Type: 2083015004 -Number: 3x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg

x-travel: 750 mm y-travel: 750 mm z-travel: 725 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische ...

Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg

Planetary stirrer Sinmag Model: SM2-500C sophisticated, robust technology ... Proven many times over! Mixer with simple manual operation Powerful 3-speed gearbox 1 stainless steel boiler 40 liters 1 flat stirrer 1 dough hook 1 broom Boiler Protective Grille / Encroachment Protection Floor-standing machine with boiler stroke DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug NEW Machine with 24 months warranty TOP quality and price in one machine! Your partner with the extra bit of service!

Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer

Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.

Control unit, control element, interface, contactor -Manufacturer: Jungheinrich, Contactor control unit from order picking forklift type: ECE 20 -Type: 5000 7894 -Voltage: 24 V -Dimensions: 150/100/H100 mm -Weight: 1.4 kg

Control, control part, interface -Manufacturer: Jungheinrich, control from electric truck ECE 20 -Type: PM 2402 L -Mat no.: 50020525 -Voltage: 24V -Number: 2x control unit available -Price per piece -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: Bernstain, Foot switch type F1-U1 UN -Voltage: 10A 500V-AC IP65 -Connector: 6-pin -Metal housing: with protective cover -Overall dimensions: 280/150/H760 mm -Weight: 3.3 kg

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

A3FLEX 500ML PRISMA FILLING LINE WITH 330ML PRISMA KIT FOR SALE Item #: Usm-199 Category Tetra Pak A3 CF/Flex A. A3 Flex 500ml and 330ml Prisma Filling Machine Machine Type : Tetra Pak A3 Flex Manufacturer : Tetra Pak Packaging Solutions Spa Year of Manufacture : 2010 B. Helix Accumulator Machine Type : ACHX10-0400-35 Manufacturer : Hartness International Year of Manufacture : 2010 C. CAP 30 Flex Machine Type : CAP 30 Flex Manufacturer : Tetra Pak Packagin, Modena Italy Year of Manufacture : 2013 Condition: Excellent and still on production. Tetra Pak maintained

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

Vacuum cleaner motor, suction turbine, wet vacuum cleaner, suction motor -Manufacturer: Ell, suction motor from scrubber dryer Gansow 70 BF 70 -Type: 500W -Voltage: 24 V -Quantity: 1 available -Dimensions: Ø 147/H210 mm -Weight: 2.8 kg

Manufacturer: Trumpf Type: TruDisk 5001(6C) Year of construction: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: 4 mm mrad Location: Dresden Optionally, the laser optics PFO 33-2 R1030-1070 HA as well as other accessories are available from us!

Voran Pasteurizer 500l/h Gas Used Subject to prior sale!

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, valve amplifier, valve control, prop. amplifier -Manufacturer: Rexroth, Prop. Amplifier -Type: VT 5004 -PCB: VT 3002 -Dimensions: 200/60/H140 mm -Weight: 0.4 kg

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg

Double hose reel, reel, hydraulic hose reel, hose reel -Manufacturer: Hans H. Meyer, double hose reel from electric forklift Still EFG 1.5/5004 -Type: 7-21 -Dimensions: 280/200/H280mm -Weight: 9 kg

x-travel: 4.300 mm y-travel: 1.500 mm z-travel: 1.800 mm Control: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mm T-slots: 9 T-slot - distance: 250 mm T-slot - width: 28 mm rapid traverse: 15.000 mm/min feeds: 10.000 mm/min milling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpm transmission ratio: 2 spindle drive: 28 kW Internal cooling system: 20 bar chip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kW weight of the machine ca.: 40.1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,500 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...

Müro paper milling machine A4; with frame; suitable for Müro 5000/A4. Müro paper mill; with frame; used for Müro 5000/A4.

Inv. Num. : 7719 Type: VK-500G Producer: PSG Plus Created: 2020 Parameters: Internal dimensions of the machine (LxWxH): 400 x 200 mm

Original Danfoss frequency converter 1,5 kW 2,2 kW and many more

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 5 m -Transport dimensions: Ø 280 x 610 mm -Weight: 32 kg

Surplus/Never used or installed, High suction pressure compression unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos -Dimensions: 630/297/130 mm -Own weight: 32.6 kg

We offer for sale our Trumatic 5000R laser punching press. The machine is used and in very good condition. Basic data from the nameplate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Ujznvnkmpx Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - Work surface 3070x1660mm - Max. sheet thickness 8mm - Axis of rotation of the tool head C1 and C2 - Form function - Thread function - Multibend function - Pneumatic press - Automatic sliding of details 500x500mm - Water-cooled servo motors Additional equipment of the machine: -Light barrier Softpunch function - Details of the slide sensor - Device for blowing out small details - Chi ...

Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 5008 -Pipe size: 1/4 to 1 -built-in cutting jaws: 1 -Dimensions: 190/240/H75 mm -Weight: 3.4 kg

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg

Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Max. workpiece weight: 120 kg - Laser Output: 3 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 4 mm - Control: CNC - Weight: 17.500 kg - Dimensions (long x wide x high): 18.725 x 6.635 x 2.500 mm

Large Format 3000x1500 Sort Master / ToolMaster SheetMaster No Grip or shearMaster - Max. workpiece weight: 220 kg - Punch diameter max: 76,2 mm - Axis speed [Y axis] max: 60 m/min - Control type: Siemens SINUMERIK 840 D - Simultaneous positioning speed (X / Y): 116 m/min - Operating hours: n/a - Axis speed [X axis] max: 100 m/min - Punching force: 220 kN - Working area max: 3.050 x 1.550 mm - Material thickness (punching) max: 8 mm - Power: installed max: 9,5 kW - Weight: 19.300 kg - Dimensions (long x wide x high): 7.600 x 8.171 x 2.072 mm