126,684 used machines on RESALE, but how to find them? Machine Search
: : : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS electronic controls OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 200 mm sheet thickness max.: 4.5 mm coil weight max.: 0.5 to DECOILER coil weight max.: 0.5 to mandrel expansion range from: 250 mm mandrel expansion range up to: 550 mm LEVELLER UNIT sheet width max.: 300 mm sheet width (min): 20 mm sheet thickness max.: 4 mm sheet thickness min.: 0.5 mm material cross section max. (450 N/mm2): 800 mm² number of leveller rolls: 7 diameter of leveller rolls: 65 mm number of infeed-/outfeed rolls: 4 diameter of feed rolls: 65 mm drive power: 1.5 kW loop controls: yes ELECTRICAL SPECIFICATIONS mains voltage: 380 V mains frequency: ...
Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...
A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible.
Vertical BAZ MIKRON VC 500 with internal cooling 10 bar Year: 2001 Control: Heidenhain 430 TNC Operating hours: 3,300h Technical data: Spindle speed: 10,000 1/min Drive power: 13 KW Tool holder: SK 40 Number of magazine slots: 21 pcs. Travels: X-axis: 510mm Y-axis: 510mm Z-axis: 560mm Table size: 650x600mm Accessories: - IKZ with 10bar - Späneförderer - Electronic handwheel - Renishaw 3D button - Oil mist extraction - Rotoclear Machine was in a training company
A fully functional sandblasting system is being sold. Dimensions of working chamber approx. H180 W 150 D160 cm Dimensions approx. H400 W210 L210cm There are 2 lifts available Price per piece 8000 Euro net plus VAT Available from June 2026 If you buy both machines, you will get a basement extraction system with water separator free of charge. See other ads. The plant must be dismantled and transported away by the plant itself. There is only a 2t forklift on site The system is handed over by us without electricity. Article location Nuremberg All information without guarantee
Clean Air System AOP Desktop, type DT 500 DeskAir PHI, For your workplace, whether in the office or in the home office, cleans the air and improves the indoor climate., - Length of the UV-C tube: 5 but has the, - power of 2.5, - Flow rate of the integrated fan:, - without blower, - Voltage: 230 V incl. voltage converter, - (integrated in the desktop) and 12 V plug, - Power: 12 volts 1 amp, - Case material: polymer, -, power: Room volume/ capacity: 74 m³ in 24 h, Dimensions / weight: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg, The machine has 40 stone removing plates, each with 50 holes.: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg
Flash Labeller – Marel Concept 500, Manufacturer: Marel Ltd., Machine: Flash Labeller, Model: Concept 500, Year of manufacture: 2019, Serial number: 10422443, Description, The Marel Flash Labeller Concept 500 is an automatic labeling system designed for high-speed labeling in food processing and packaging lines. The machine applies labels quickly and accurately to products or packaging, ensuring reliable identification and traceability in production environments., Marel equipment is widely used in the meat, poultry, fish, and food processing industries due to its hygienic design and reliable performance., Technical Specifications, - Manufacturer: Marel Ltd., - Model: Concept 500, - Machine type: Automatic labeling machine, - Year: 2019, - Serial number: 10422443, - Voltage: 230 V ±10%, - Frequency: 50 / 60 Hz, - Current: 4 A, - Short circuit rating: 5 kA, - Protection rating: IP54, - ...
degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 500 kg throat: 5.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm digital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 5000 , 2050 , 80
Presse à injecter SANDRETTO 500 T Serie 7 Type : 3270/500 Force de fermeture : 500 T Diamètre vis : 80 mm Volume théorique d'injection: 2110 cm3 Poids de l’injection en PS : 2050 gr Longueur utile de la vis L/D : 20 Capacité de plastification : 290 kg/h Zone de chauffe : 4 Puissance total de chauffage : 31 KW Epaisseur moule min/max : 250-800 mm Course plateau mobile : 830 mm Passage entre les colonnes : 720 x 720 mm Capacité réservoir d’huile : 500 L Dimensions : 9,0 x 1,80 x 2,50 m Poids total : 25 000 KG
Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: Bosch RRU 3063 washing machine Bosch HQL 2220 sterilising/pyrogenising tunnel Filling/capping machine Bosch ALF 4060 Labelling machine Bosch ERS 2010 (500) Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton Skinetta ASK 450-bU banding machine Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h Capacity for ERS 2010 max. 30,000 ampoules/h With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) Menu languages English, Mandarin PLC Siemens S7-300 Danfoss VLT 2800 servo inverter CE decla ...
Strip light scanner consisting of: 1 pc. control unit Art.-No. VL-500 1 pc. 500-mm base Item no. VL-550 1 pc. measuring head Art.-No. VL-570 1 pc. Accessories including calibration plate, user manuals item no. VL-A2D 1 pc. Cover Art.-Nr. VL-C2 1 Pc. Win10 PC for VL-500 Series Item No. 972337 1 pc. LCD monitor for VL 23-inch Art.-Nr. Reference 972072L 1 pc. Comparative measurement module Art.-No. VL-H2P 1 pc. Shape and Position Tolerance Module Art. No. VL-H2G 4 pcs. AC cable Art.-Nr. OP-99031
Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt
Transnorm conveyor belt GF 1740-600-500 RA2478 Technical data: Conveyor length (NL): 1740 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 1740 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports and side guides Für eine ...
turning diameter: 356 mm turning length: 510 mm control: M 730 BM total power requirement: 40 kVA weight of the machine ca.: 6,6 t dimensions of the machine ca.: m CNC control: Mitsubishi 730 BM Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Power: 11/7.5 kW (25% duty cycle / constant) Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil ...
Sandretto Serie 9 type 4170/500 - 500 T Year : December 2002 Clamping Force : 500 T Screw Diameter : 80mm Injection Volume : 2056 cm3 Injection Pressure : 2027 bar Platen Sizes : 1300 x 1300 mm Distance Between tie bars : 900 x 900 mm Tie Bar Diameter : 150mm Min/max mold high : 300 / 1000 mm Moving Platen Stroke : 950mm Ejector Stroke : 380mm Oil Filling : 900 Litres Dimensions : 8520x2660x2165 mm Weight : 21,000Kg
Number of boring spindles: 7 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 30 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 80 mm max. turning diameter: 460 mm Max. Turning length: 1.000 mm control: System TX 8F max. Spindle speed: 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
COMAFER grinder model MAC 500: – hourly production from 100 to 200 kg/h – 10 HP, 380 volt motor – 965x500 mm inlet – overall dimensions 1.7 m x 1 x h=1.5 m – weight 800 kg – year 1997, in accordance with CE standards
Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data type: VP500 year of manufacture: 2012 Total output: 20 cycles/min length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm packaging data: length: 100-300 mm width: 200-450 mm height: 60-350 mm height of tray edging: 40-100 mm pre-cut: length: 200-500 mm width: 290-600 mm power: 400V,N,PE | 10kW/33A | air: 6-7 bar | 20 NL/cycle
Packaging capacity single jaw/double jaw: 100/200/h, sealing jaw spacing: 150mm, sealing jaw width: 250mm, product length range: 50mm-500mm, product width range: 20mm-230mm, max. product height: 120mm, max. cut-off: 650mm, max. film width: 650mm, max. roll diameter: 350mm, roll core diameter: 76mm, max. roll weight: 40kg, machine weight: approx. 850kg. Documentation available. An on-site inspection is possible.
Work table AT 500 drawer cabinet Work table Gastro bakery table Stainless steel version with 3 drawers Approx. dimensions: 500 x 600 x 850 mm, WxDxH Used device as good as new
The machine is in good technical condition, after prior agreement it is possible to test it. Spindle completely overhauled summer 2023 Ball screw replaced in Z axis in 2020. Feeds: X axis 850 mm Y axis 700 mm Z axis 750 mm Working feed 1-24000 Positioning accuracy +/- 0.005 Rapid feed – 48m/min all axes. Distance spindle face – front of table 150-900 mm Distance spindle axis – pallet surface 50-750 mm Pallet – 500 x 500 Spindle alfaP22/8000 Motor power (continuous/15') – 11/15/18.5 Spindle speed – 8000 rpm Base speed – 8000 rpm Tool clamping force – 1000 N Max. torque (15') 29.2 Nm Orientation built-in sensor Taper ISO 40, taper 7/24 Power transmission – synchronizing belt and pulley Cooling through the spindle – 70 kg/cm2, max flow 20 L/min, pump power 3.7 KW Magazine for 60 tools – chain – be careful, the catalogue incorrectly states 40.
Sourdough plant Isernhäger B 500 Eco Manufacturer : Isernhäger Type : B 500 ECO Year of construction : 2008 Weight : 395 Sourdough stirring kettle Sourdough container IsernHäger the baking culture completely in stainless steel Kettle capacity 500 liters mobile on rolls Details see pictures.
Sumbel Herald 500; Condition as is; cleaned and tested; Working width 500mm; suitable for cold glue. Sumbel Herald 500; condition as is; cleaned and checked; working width 500mm; used for cold glue.
Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998
Used paddle mixer with a capacity of 500 liters. Manufacturer IBL. Acid-resistant design.
A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible.
A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption.
table diameter: 790 mm table load: 500 Kg swivelling range: 0 - 135 Grad turning speeds: max. 2,0 U/min connected load frequency: 400 V weight: 0,95 t Dimensions (LxWxH): 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 500 mm thickness of jaw: . mm hollow: 145 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate 500 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 18 mm -Groove spacing: 280 mm -Dimensions: see drawing in the photos -Dimensions total: 500/500/H75 mm -Weight: 128 kg
Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch -Manufacturer: All Mecanic, multifunctional punch -Type: 994.500-1 - Execution: pneumatically operated, with foot control -Punching tool: see photos -Dimensions: 400/270 / H370 mm -Weight: 28 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H190 mm -Weight: 87 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H335 mm -Weight: 123 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H320 mm -Weight: 121 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H310 mm -Weight: 86 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg
Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating -Infrared dryer: used for powder coating slats/blinds production -Manufacturer: Himmel, type HA 5-2-9/500 -Geared motor: WEG 0.37 kW -Dimensions: 880/1050/H2200 mm -Weight: 308 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-63-500-PPV-A -Piston diameter: 63 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Price: per piece -Number: 2 pieces -Dimensions: 690/80/H80 mm -Weight: 4.5 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-50-500-PPV -Piston: Ø 50 mm -Stroke: 500 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 70/70/H585 mm -Weight: 4.65 kg
rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg
Extraction slides, ventilation duct slides, slides for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap -Material: Steel sheet -Quantity: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -not: driven -with: material brake -Roll width: 500 mm -Transport length: 1080 mm -Rollers: Ø 80 mm -Roll distance: 200 mm -Total height of roller conveyor: 205 mm -Number: 17x transport trolleys available -Price: per piece -Transport dimensions: 1200/620/H980 mm -Weight: 42 kg/piece
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg
maximum number of results exceeded
please refine your search
