up 500 used for sale

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 500 x 500 Side holm guided Plate size: 500x500mm Cake thickness: 25 mm Useful length: 2200 mm Chamber number: 47 pieces Filter pressure: 15 bar Closing pressure: min. 220 bar / max. 260 bar Cake volume: approx. 3.9 m3 Total filter area: approx. 17.4 m2 Expiration: closed Plate material: PP Plate transport: manual Filter cloths: optional Pump: Abel diaphragm pump optional

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

X-ray tube assembly type SRM 2250 red abzugen GS-500.

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

used, kpl. 1 year warranty, plate size 500 x 500 mm, 30 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 115 liters, filter area 12m2, dimensions 3000 x 1000 x 1400 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Type: Jumbo KODUKO 16-500 / DF510 / SKM103-03 Capacity: 2500 kg / h Cooking time: 120 min Type: Schroder DF510 Hopper diameter: 600 mm Hopper lenght: 520 mm Power: 0.12 kW Type: Schroder SKM103 Dimension: 2500 x 3375 x 2510

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Working length: 1040 mm max sheet thickness: 1.5 mm aluminium: 2.0 mm stainless steel: 1.0 mm maximum opening width with segments: 95 mm maximum opening width without segments: closed 235 mm maximum passage height: 90 mm rear gauge: 530 mm bending angle: 0-140° working height: 1005 mm width: 1570 mm depth: 820 mm height: 1270 mm weight approx.: 310 kg

Power: 500 kVA / 400 kW Diesel engine / type: MTU / 12V183TB32 Cylinder: V12 Cooling: liquid-cooled Generator / type: NEWAGE STAMFORD / HCI 534 D2 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min-1 Type: complete unit in the sound-proof 20' - HC-container Tank: 1500 litres Switchgear / Starter: automatic switchgear with handover synchronisation. Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: Yes Dimensions (L X W X H): approx. 6150 x 2480 x 2896 mm Weight: approx. 12000 kg Year built: 1996 / 2010

Power: 500 kVA / 400 kW Diesel engine / type: VOLVO / TAD 1631 GE Cylinders: number 6 Cooling: liquid-cooled Generator / type: MECC ALTE / ECN 40 SC/4 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20 container Tank: 1000 liters Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24V Generator switch: Yes Power switch: Yes Automatic: Kuhse Dimensions (L X W X H): approx. 6100 x 2340 x 2380 mm Weight: approx. 9000 kg

Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm

Complete brewery brewhouse 500 l / 6 fermentation tanks

500 ton x 5000mm Y1 Y2 X1 X2 R1 R2 Z1 Z2

Stein RAKO 500 smokehouse, electical heated, all stianless steel, cooking, baking, smoking, smoke system for wood chips. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Bearing platform 4,000 x 5,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 2 main beams C+300 x 3 x 3,990 mm (perforated) 5 cross beams S+300 x 2 x 4,800 mm (closed) 10 mounting angles 2 Cross Associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Inhpbdx Columns: 100 x 100 x 3 mm Main beam: C-Profile C+300 x 3 mm (perforated) Cross member: Sigma profiles S+300 x 2 mm (closed) Flooring: 38 mm chipboard, white on one side P6 Columns in the following standard colors: Ral 7035, light grey Ral 70 ...

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

Bearing platform 8,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions floor area: 8,000 x 5,000 mm Floor area: approx. 40 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: Ok minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 Mounting angle 3 Cross Associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, red, fire Ral 5003, sapphire blue (Other colors on request!) Main and cross beams galvani ...

Bearing platform 12,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions floor area: 12,000 x 5,000 mm Floor area: approx. 60 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 8 stand, one side 100 x 100 x 3 mm 6 main beam C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross member S+300 x 2 mm, L = 4,800 mm (closed) 26 Mounting angle 3 Cross Associations 24 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000 fire red Ral 5003 sapphire blue (other colors on request) Main and cross bea ...

Bearing platform 16,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions floor area max.: 16,000 x 5,000 mm Floor area: approx. 80 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 10 stand, one side 100 x 100 x 3 mm 8 main beam C+300 x 3 mm, L = 3,990 mm 18 cross member S+300 x 2 mm, L = 4,800 mm 36 Mounting angle 4 Cross Associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000, red, fire Ral 5003 sapphire blue (other colors on request) Main and cross beams galvanized  ...

Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. outside marbled 4.500 liters UNI-DACH Measurement and Weight: Total Height: 2900 mm Cyl. Height: 2000 mm Diameter: 1750 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: - with manhole round DN 500 with hanger - with 2 cran eyes - with thread connection 2 x DN 25 and 1 x DN 65 - with CIP spray head Cylinder tank: - ladder hook - with sample valve - with level indicator with bar and scale - with temperature indicator analog - with thread connection DN 80 Lower bottom: - with conical bottom - with forward pulled outlet pipe with butterfly valve DN 50 - with 4 calotte feet height adjustable

Key data: 3000 , 1500

Technical data: Height 300 mm Length 3.000 mm Width 1,500 mm

MÖSCHLE Storage tanks outside marbled for wine, water, fruit juice, schnapps 11.500 liter UNI-NIED Measurement and Weight: Total Height: 3430 mm Length: 2350 mm Width: 1800 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection NW25 For level indicator with bar and scale With connection for zapf clape gr. 37 With connection DN 15 for sample valve Lower bottom: With flat bottom With outlet pipe connection NW50

Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...

; ready for operation

Kilia grinder and paddle mixer Leopard G-160 / 500 ltrs., combination consisting of 500 liters paddle mixer and 160 mm grinder, with loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

McIntyre 500 CAT Shear The 500 CAT is designed for those needing just a bit more blade length without an equivalent increase in price. Versatile The 500 CAT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to assist when processing catalytic converters. Long-lasting In common with all JMC shears, the 500 CAT has been designed and built to last. Blades are deep hardened for extended life, hardened chrome rod is used in the hydraulic ram, and components are all choiceed according to their quality over and above their price.

McIntyre 500HD Shear This new generation shear is faster and more powerful than any other machine of its size. Featuring an automatic hold down clamp and 20 inch blade, this model is available as electric or diesel Fast and strong This 508mm, 20 inch, blade shear has been built for speed and power, and will outperform every other machine in its field. The McIntyre 500HD has enough shear force to deal with a wide range of operations and materials including: the cleaning of automotive aluminium scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves, and the handling of all non-ferrous separations. It can also be used for cropping ferrous metals.

Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use

Expansion tanks Zilmet. 500 litres

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

CKT 500 52 kW heating to dry cooking dryer is sold by granulate or regrind. Container for approx. 800 kg bulk.

- P-500-50 - P-320-50M

Berief” drum blancher Type Jumbo KODUKO 16/500 continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating nett length ± 11 m all stainless steel adjustable speed variable dwell adjustment steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with conveyor belt with elevating spiral screw for loading

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...

Vickers hardness tester of the extra class Modular design - as stand alone hearing tester or as a fully automatic machine. cheapest fully automatic machine worldwide As a full automatic incl. - 6-fold turret - 5 MP camera - 2 lenses (2 more optional) - motorized XY table - Overview camera - first-class hardness testing software IMPRESSIONS - incl. automatic hardness course CHD, NHT, RHT - additional software - modules for 2D / 3D mapping, screw testing ISO898, edge finishing, etc. - motorized lifting spindle - Autofocus, auto brightness + contrast ... This is THE quality machine at a fair price request now without obligation!

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.