129,239 used machines on RESALE, but how to find them? Machine Search
Roller conveyor, conveyor belt, roller track -not powered -Roller conveyor: on wheels -Roller width: 500 mm -Transport length: 1500 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Total height of roller conveyor: 210 mm -Dimensions: 1500/625/H210 mm -Weight: 42 kg
Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg
Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg
Vernier caliper, caliper, vernier caliper -Manufacturer: Mauser, calipers, vernier calipers -Measuring range: 0-500 mm -Vernius: 0.05 mm -Dimensions: 655/157/H11 mm -Weight: 1.0 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg
Servo drive, controller, converter, controller, controller adapter base -Manufacturer: Siemens, Controller Adapter Base Series 500 -Type: 500-5840 -Dimensions cardboard: 500/250/H180 mm -Total weight: 2 kg
Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...
Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg
NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU
Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece
Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 525 mm, height 500 mm -Wall thickness: 25 mm -Grooves: 175 x 30 mm -Holes: Ø 25 mm -Dimensions: 500/525/H500 mm -Weight: 124 kg
Key data: 1050 mm, 540 mm, 510 mm
Machine Details Stock-No. 1105-04012 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DN 500 Year of manufacture 2008 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 540 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 18 kW turning speed range 12000 1/min tool taper SK 40 table surface area 1200 x 500 mm groove width 18 mm Number of noches 4 St. Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12,000rpm spindle) fanuc SERIES ...
Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DN-50-500 PPV -Stroke: 500mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars -Dimensions: 680/65/H100 mm -Weight: 4.3 kg
Key data: 350 mm, 550 mm, 510 mm
Year of construction 07-2017 Mazatrol Smooth X Control Travel range: X-axis: 350 mm Y-axis: 550 mm Z-axis: 510 mm Swivel range A-axis -120° / +30° C-axis swivel range ±360° Max. spindle speed 12,000 rpm Tool magazine with 30 tool positions SK-40, DIN69871 Maximum workpiece height 350 mm Max. distance from spindle nose to top edge of table (horizontal) 560 mm Min. distance spindle nose to top edge of table (horizontal) 50 mm Max. distance spindle nose to table center (vertical) 550 mm Min. distance spindle nose to table center (vertical) 40 mm Max. table load 200 kg Air Blow Out Milling Spindle Maza-Check Mazak Monitoring B, Renishaw RMP 600 High-pressure coolant through the spindle, 15 bar Synchronized Tapping 5-axis simultaneous machining Preparation of chip conveyor, ejection left (without chip conveyor) Height 2,840 mm Width 1,900 mm Length 3,060 mm ...
Key data: 500 mm, 400 mm, 300 mm
Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !
Inv. Num. : 7637 Type: Robot 500 Produzent: Vemag Erzeugt: Parametern: Portionsgewicht: 5-30.000 g Kapazität: 2800 kg/h
Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Computer cabinet, control cabinet, terminal cabinet, terminal enclosure, control panel floor-standing enclosure, server cabinet, switch cabinet, system cabinet -Terminal cabinet: System cabinet housing stainless steel -Width: 595 mm -Depth: 500 mm -Height: 2000 mm -Weight: approx. 90 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: double-winged, compartment width 30 cm -Width: 600mm -Depth: 500mm -Height: 1820mm -Doors: lockable, without lock -Number: 2x locker available (1x with 2 shelves) -Price per piece -Weight: 40kg / 42kg
Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø90 x 30mm -Item No.: 858 762 65 -Heating power: 500 W -Voltage: 220 V -Dimensions: 230/160/H80 mm -Weight: 0.4 kg
Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm
Inv. Num. : 7718 Type: GL MATIC 500 Producer: OMAS Generated: Parameters: The machine is in good condition.
Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness
hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg
Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness
New chain hoist with warranty Year 2013 Stroke 1/4 m/min complete with underlays, landing gear, etc.
Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: chuck size Ø 500 mm -Receptacle: short cone 8 (Ø 136-139 mm) -Hole circle: Ø 172 mm -Through hole: Ø 80 mm -Groove width: 20 mm -Weight: 86 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes/laundry locker -Steel locker: double-doored, compartment width 30 cm -Width: 600 mm -Depth: 500 mm -Height: 1855 mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 38 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: three-winged, compartment width 30 cm -Width: 900mm -Depth: 500 mm -Height: 1840mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 56 kg
Height 1850 mm Width 950 mm Length 2650 mm Capacity 500 l Power supply: 400V 50Hz 3N Total power 12.5 kW Main Material Stainless steel, acid-resistant Stirrer Type Spiral Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer
Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR-500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 8 mm polypropylene strapping Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue
Transnorm belt conveyor GF 3990-700-600 RA2069 Technical data: Conveyor length (NL): 3990 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3990 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: ...
plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: plastic strapping band 2 rolls -Type: HM 19-725-500 -Width: 19mm -Length: 500 m -Number: 2 rolls -Price/Delivery: complete -Box dimensions: 310/300/H310 mm -Total weight: 12.8 kg
Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...
Door closer, floor door closer, locking body -Manufacturer: Geze, floor door closer closing body type TS 500 NV, unused Ovp -Article No.: 0672-CPR-0121 -Number: 11x door closers available -Price per piece -Dimensions: 300/90/H80 mm -Weight: 3 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet drawer cabinet sturdy design -2 drawers: layout/height see photos -Cabinet door: lockable -Number: 1x cabinet available -Dimensions: W x D x H 500/600/H 800 mm -Weight: 35 kg
Micrometer screw, outside micrometer screw, precision micrometer screw -Manufacturer: KS, Micrometer: Precision micrometer screw -Measuring range: 500-600 mm -Reading: 0.01 mm -Locking device -Standard: TGL 150 46 -other sizes: also available -Dimensions box: 880/545/H50 mm -Weight: 6.2 kg
Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...
STROMAB pneumatic cut-off machine mod. TR 500 – CE standards – used - With 4000mm TIGERSTOP electronic positioning stop - Table with 4500mm infeed rollers - Table with 4500mm outfeed rollers - Blade diam. 500 - Maximum cutting capacity: 360 mm (L) to 60 mm (H) 135 mm (H) to 280 mm (W) - 10 hp motor - 415 volts - Matr. 1377 - Year 2007
arm length: 5000 mm weight max. in kg: 500 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet Schäfer, drawer cabinet sturdy design -1 drawer/ 2 borders: Layout/height see photos -Cabinet door: lockable -Quantity: 1 piece available -Dimensions: W x H x D 500/500/1000 mm -Weight: 29 kg
door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV -Art.No.: 0672-CPR-0121 -Dimensions: 270/70/H65 mm -Weight: 2.8 kg
throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 14 mm, length 380 mm -Hole spacing: 470 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 500/55/H72 mm -Weight 3.1 kg/piece
maximum number of results exceeded
please refine your search
