We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,030 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Italian top make, control Grundig manual-plus V 260, very robust machine! Top width 1500 mm maximum swing over bed 625 mm Spindle bore 105 mm Taper MK 5
used
-Röhm three jaw Chuck ø 160 mm -Steel holder multi fix A -div. collets -Fixed bezel -Revolving bezel -Chuck -Nivelierelemente Technical data: Tip height 140 mm Top width 500 mm Spindle bore 38 mm Spindle speeds 15-3550 RPM. Machine weight approx. 750 kg
used
Description The machine was Teilrevidiert Technical data: Usable area of table 1100 x 255 mm Table movement: Longitudinal/vertical/horizontal 700 / 430 / 250 mm Spindle speeds 38 1500 rpm. Recording ISO 40 Dimensions L/W/H 2260 / 1720 / 1650 mm machine weight approx. 1650 kg
used
Description -Pivoting milling head -Coolant system Technical data: Table 250 x 500 mm Travel ca X/Y/Z 330 / 400 / 475 mm Speed 63-2800 RPM. Quill stroke 60 mm Dimensions of 1100 x 1400 x 1600 mm machine Recording ISO 30 continuous feed Machine weight approx. 950 kg
used
Description Steel holder Multifix type: B Plexiglass Chuck guard Three-jaw Chuck ø 200 mm Live Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)
used
Description Steel holder Multifix type: B Plexiglass Chuck guard Four-jaw Chuck Face plate ø 300 mm Live Fixed bezel Various gears Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)
used
Description The machine was without Accessories: Spannznangen, div. end mill holders. Technical data: x away the 300 mm y away 150 mm z away 340 mm Table 210 x 600 mm Spindle speeds 40-2000 RPM. Feed 10 500 rpm. Recording ISO 40
used
Description Digital display, route and position control HEIDENHAIN specifications: Traverse path x/Y/Z 400/410/400 mm Table size 800 x 450 mm Speed of 30 RPM/2240 Feed 1-750 mm / Rev Rapid traverse 2000 mm / min Toolholder SK 40
used
Description Feeds in all 3 axes adjustable Digital display, route and position control HEIDENHAIN TNC technical data: Traverse path X / Y / Z 500 / 500 / 400 mm Speed range 30-2240 Rev/min Spindle speeds 24 Feed range 1 750 mm / min Rapid traverse in all feed directions 1500 mm / min Size 450 x 800 mm Weight approx. 1400 kg
used
Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
used
Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
used
1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
used
1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
used
Universal belt infeed Make: Metz Max band thickness: 3,0 mm maximum band width: 110 mm
used
Tip height 125 mm Top width 500 mm Speed 45-3000 U/mm Feed 4 260 mm / min Camlock D1-3 spindle nose Tailstock taper MK 2 Turning diameter over bed 250 mm Swing over cross slide 120 mm Upper carriage travel 100 mm Cross travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight 950 kg
used
Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.
new
QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...
used
The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...
new
The quasar 2,5 kN is a product with the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typical obtained from static universal testing machines tensile, pressure and bending - cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configu ...
used
Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.
new
Technische Daten: - 21 Spindeln incl. 21 Schnellspannbohrfutter - Spindelabstand 32 mm - max. Bohrtiefe 70 mm - Schaftdurchmesser der Bohrer 10 mm - Bohraggregat 0C- 45C- 90C schwenkbar zum stirn- und flächenseitigen bohren - 3 Pneumatikspanner - wegschwenkbare Seitenanschläge mit mechanischer Digitalanzeige - Fußpedal zum Spannen - Bohren - Lösen - Abstand von erster zur letzten Spindel 640 mm - Spindeldrehzahl 2850 U/min - Tischgröße 880 x 425mm - inkl. 3 m Anschlaglineal mit 2 Klappanschlägen für Lochreihenbohrung - Pneumatikanschluss 6 bar - Motorleistung 1,1 kW / 400 V - Verpackungsgröße 1320 x 1220 x 1400 mm - Gewicht 275 kg komplett mit: - Spiral System, Programmier u. Einstellgerät der Bohrtiefe - 21 Schnellwechselfutter - Positionseinstellung der Seitenanschläge über Digitalzählwerke - 3 Stück Druckluftspanner - Pneumatisches schwenken der Bohreinheit 0-90C - W ...
used
Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg
new
Do not buy a used tractor tester 100 kN or smaller: In almost all cases, the electronics for WIN 7 or 10 need to be completely modernized. For the purchase of the used universal testing machines, pick-up, refurbishment and their retrofit, you will receive a new machine (!) from GALDABINI from us Quasar 10 kN latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine constructed using finite elements FEM Available load cells: 10 N | 20 N | 50 N | 100 N | 250 N | 500 N | 1 kN | 2.5 kN | 5 kN | 10 kN for tests on plastics, rubber, foils, textiles, components, assemblies and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, future-oriented design Extreme signal resol ...
new
Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...
new
QUASAR 1200 kN tractor / universal testing machine This is the replacement for an outdated, uneconomical hydraulic tractor testing machine / universal testing machine. Concerns when purchasing a used (hydraulic) universal test machine that will almost certainly be modernized with new electronics for WIN 7 or 10. In addition, used machines often have other (hidden) defects, such as a knocked-out central spindle of the lower clamping head. Quasar 1200 kN with the latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine designed by finite elements FEM for tests on steel, reinforced steel, screws, wire ropes and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, fut ...
used
Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.
used
Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.
used
4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station
used
Universal milling machine with automatic movement ram. Table size: 1600mmx320mm. Longitudinal travel: 1200mm. Cross travel: 300mm. Vertical travel: 600mm. ISO50. Hure head. Equipped with DRO Fagor.
used
5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent
used
Maho UIniversaltisch
used
used
Universal milling machine with automatic movement ram. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. Vertical head. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.
used
Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg
used
Universal tool cutting machine Year of construction 1991 Travel distances: 500x400x330mm Control : Heidenhain TNC 355 Specifications: Auerbach FUW 400 Table 710x400mm Travel 500x400x330mm Tool holder: ISO 40 Vertical spindle speeds: 28-4000 rpm Presets 1-1250mm/min Connection value 13 kW Machine weight approx. 2300kg Dimensions 2500x2000x2500mm Milling head re-stored, new bevel gears
new
Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ...
new
Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ext ...
new
Technische Daten: - max. Schleiflänge 300 mm - max. Schleifhöhe 200 mm - max. Werkzeug FI 380 mm - Drehzahl Schleifscheibe 3500 U/min - Motor 590 W / 400 V - Vorrichtung zum schleifen von HM Sägeblätter bis 630 mm - Vorrichtung zum Schleifen von Bohrern und Schaftwerkzeugen - Aufspanndorn FI 25 , FI 30 und FI 40 mm - Kühlmitteleinrichtung von oben mittels Kunststoffgelenkschlauch verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - gesamte Bedienung von der Vorderseite - Gleitmittelpumpe - Diamantschleifscheibe FI 150 x 16 mm - Abmessungen L=800, B=1000, H=1600 mm - Gewicht 350 kg
used
Dimensions: L 620 mm x W 330 mm x H 1520 mm Drive: 2,2 KW Speed: 18000 RPM Grinding Chamber diameter: 130 mm Width: 40 mm medium air flow rate: about 2-4 m ³/min. Capacity: from 1 to 50 kg / h-> depending on the material and desired fineness.
used
Newly painted Size (LxWxH): 100cm x 70cm x 23cm
used
- 1 outlet nominal power kg/h 800 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 72 5 mm width 690 mm Height 1520 mm Weight 75 kg material 1.4301 / AISI 304 Height ejection in 475 mm Supplied incl. sieve 5mm ; New machine - best condition
used
Rated power kg/h 1500 kg/h Engine power 11 (15) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A Laenge 810 mm width 725 mm He he 1570 mm weight 133 kg Material 1.4301 / AISI 304 Sieve 5mm ; New machine - best condition
used
Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..
used
Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW
used
5-axis controlled fraescenter Control: E 160 CNC Travel distances: X 1,050 mm Y 420 mm Z 420 mm spindle holder: ISO 40 spindle drive power: 9 kW spindle speeds: 4,000 rpm. Gear levels: 2 spindle torque: 450 Nm tool magazine positions: 15-speed pick-up magazine Zubehoer: 2-axis clamping device for parts, ISO 50; Vertical frause head ISO 40; Full cladding; tool magazine pick-up for 15 tools; SEHR WENIG USED; WORKING ONLY WITH OeL !; Excellent
used
Universal fraestable, table 800 / 450 mm
used
x/y/z = 500/360/400 mm, max. 4000 rpm, 4 clamping corner, 1 pushbutton, various shots, cabinet Lista
used
5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)
used
Speed: 5.295 UPM, with documentation
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets