universal tool grinding used for sale

Meat Grinder Unger system 5 tools Manufacturer: Sind Model: S32P Dimensions: 800x600x1000 mm Electric power: 3kW Capacity: 800 - 1,000kg/h

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/sec tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad connected load frequency: 400 V total power requirement: 2,5 /3,3 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2-10 A DC Operating temperature: -20 to +70 °C Humidity: 0-90% without condensation You can also find the corresponding screw control in our shop!

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

diameter: div. number: 44x tool adaptor: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU441W1456 LocationBarneveld CEcheck MakeTool-temp Main Features Heating (medium)Electric Capacity24 KW Temp.140 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Temperature+140°C With pumpcheck Capacity110 l/min Motor1,8 kW, 380 volt With temperature controllercheck Information TypeTT-138 N-B4 Mach.No.321-3416-4 Year of construction2021 Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,240x0,480 m Total height1,40 m Weight220 kgTemperature control unitsTool-tempHeat exchangers > Temperature control unitsBrand > Tool-temp What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...

General SKU029G111 MakeTool-Temp AG Romanshorn TypeTT-20.000 WK/R-404 A Mach.No.97-13868 Year of construction1997 Main Features Heating (medium)Electric Capacity6.9 KW Temp.40 °C Specified Features - Temperature control unit Temperating machinecheck Chiller Heating medium:R-404 A Electric capacity6.900 Watt, 400 Volt With coolingcheck Temperature+10/+40°C. With pumpcheck Motor1,1 kW With temperature controllercheck Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,2 x 0,8 m Total height1,6 m Weight350 kgTemperature control unitsTool-tempHeat exchangers > Temperature control unitsBrand > Tool-temp What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

General SKU441W1455 LocationBarneveld CEcheck MakeTooltemp Main Features Heating (medium)Electric Capacity24 KW Temp.140 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Temperature+140°C With pumpcheck Capacity110 l/min Motor1,8 kW, 380 volt With temperature controllercheck Information TypeTT-138 N- B4 Mach.No.321-3416-2 Year of construction2021 Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,240x0,480 m Total height1,40 m Weight220 kgTemperature control unitsTool-tempHeat exchangers > Temperature control unitsBrand > Tool-temp What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...

General SKUR0144 LocationBarneveld MakeTool-Temp (CH) Main Features Heating (medium)Electric Capacity12 KW Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Electric heatingcheck Electric capacity12 kW 380 Volt With pumpcheck Capacity5 bar max 110 l/min Motor1,8 kW With temperature controllercheck Information TypeTT-131 N Mach.No.91-6662 Year of constructionunknown With switchcheck Floorspace0,9x0,4 M Total height0,9 M Weight160 KgTemperature control unitsTool-tempHeat exchangers > Temperature control unitsBrand > Tool-temp What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300P635 LocationBarneveld MakeTool Temp Main Features Heating (medium)Electric Specified Features - Temperature control unit Temperating machinecheck TemperatureMax 90 grd water / 150 grd oil Information TypeTT-162E Floorspace0,8x0,3 M Total height0,9 M Weight120 KgTemperature control unitsTool-tempHeat exchangers > Temperature control unitsBrand > Tool-temp What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

For sale are 48 square holders with Erowa reference system (F-tool) Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

CNC Vertical Turret Lathe with C axis and live tool 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Max. turning dia.: 2200 mm Max. turning height: 1800 mm Ram travel: 1500 mm Main drive: 75 kW Live spindle: 15 kW Spindle rotations: 45- 1350 1/min Max. workpiece weight: 12 000 kg Pallet changer with 3 pallets (turning plates) Tool magazine: Right: 8 turning tools Left: 8 boring/milling tools Feeds: 0,1-6000 mm/min Carriage feed: Vertical: 1500 mm Horizontal: 1320 mm Table rotation (2 ranges): 2,5 – 70 / 10-280 Max. table torque: 50 000 Nm Machine weight: 43 Ton Machine HxWxL: 6,8 m x 10 m x 9,7 m

2 x used Tool-Termp TT-162 H/P H E Mold Temperature Regulators, 400 V 3ph 50 Hz, 14kW, pump through put 19.8 Gallons/ min, Origin:Switzerland, Origin: Switzerland

Key data: 300 °C, 12 kW

1.0 St. gebr. Temperature control unit Manufacturer: TOOL - TEMP Type: TT - OIL 300, 12 kW Year of manufacture: Medium: OIL Temperature: 300° C Heating capacity: 12 kW

For sale is a Tool Temp temperature control unit Works without any issues. To sell due to business closure. Technical specifications in the pictures. Self-collection and dismantling. Price per piece 2 pieces in stock Price is net plus VAT All information without guarantee

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mm tool adaptor: Capto C5 Torque: max. 100 Nm Max. Speed: 4.000 min/-1 weight: 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm The data for this ad was created with ModulMWS - the sof ...

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mm tool adaptor: Capto C5 Torque: max. 100 Nm Max. Speed: 6.000 min/-1 weight: 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm The data for this  ...

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide for tool dispensing systems -Manufacturer: igus, linear drive type DryLin T from Achterberg Toolbase AK -Actuator: DLG 060-068.03 -Threaded rod: Ø 12 x 980 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 1615/110/H120 mm -Weight: 5.5 kg/piece

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide -Linear drive: stroke length 620 mm from Achterberg Toolbase AK -Actuator: DLG 060-068.01 -Threaded rod: Ø 12 x 615 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 745/80/H80 mm -Weight: 1,7 kg/piece

Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Description This sensational, versatile tool with a diameter of 35 mm solves your cutting and micro-perforation problems in one fell swoop. Only one tool for micro-perforation, cut-off, cut-out, edge trimming and scribing.

: gebraucht : 2416 B : China : 180 € : 1 : 140 mm : 50 mm : 147 mm : 15 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2411 : China : 120 € : 1 : 100 mm : 40 mm : 108 mm : 13 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2892E : China : 450 € : 1 : 125 mm : 45 mm : 100 mm : 29 kg MINT CONDITION 2 axes machine vice for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2890D : China : 210 € : 1 : 160 mm : 50 mm : 125 mm MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2973D : prompt, Zwischenverkauf v : China : 540 € : 1 MINT CONDITION horizontal- and vertical rotary table HV 12 direct deviding over 360° scale reading on the table grade dividing dividing by skale via adjustable nonius centre height195 mm table diameter300 mm daylight opening (horizontal)132 mm? worm gear ratio?90:1 weight?76 kg? OPTIONAL:talestock EURO 120,-- dividing plate EURO 120,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6160F : prompt, Zwischenverkauf v : China : 95 € : 1 : 75 € : 610 - 920 mm : 700 kg : 20 kg : 350 mm : 52 mm : 1 univsersal useable (band saws, circular saws, eg.) infinitely variable height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6112A : prompt, Zwischenverkauf v : China : 110 € : 1 : 530 - 870 mm : 700 kg : 20 kg : 2 x 125 mm : 52 mm : 2 univsersal useable (band saws, circular saws, eg.) infinitely variable height adjustment perfect for round tubes, because of V-type The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6019 : 390 € : 1 : 270 € : 40 kg : 1500 mm : 600 mm : 1000 kg : 700 - 1.000 mm MINT CONDITION 3 table elements with 6 balls each The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2889J : China : 150 € : 1 : 125 mm : 44 mm : 100 mm : 16 kg MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (Sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:800 mm y-travel:410 mm z-travel:510 mm control:Fanuc 10 MA rapid travel x/y/z:20/20/15 mm/min table surface area:1100 x 450 mm tool taper:BT 40 tool magazin::30 BT 40 max. tool length:250 mm max. tool weight:8 kg power requirement:7,5/5,5 kW turning speed range:6000 1/min weight of the machine ca.:6,3 t Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup"

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

: gebraucht : 2012 : 9403 : prompt, Zwischenverkauf v : China : 180 € : 1 : 1/4, 3/8, 1/2 mm : 4 kg operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker >  ...

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

max. grinding diameter: 320 mm grinding length: 500 mm workpiece length: 700 mm total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Height of centres 220 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis, manual 200 ° Grinding head tilting, manual +/- 90 ° Speed range of R axis, approx. 0 - 50 rpm Grinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS  ...

Offered is a universal tool grinding machine: Speed: 2800rpm, grinding range: approx. 30-50mm diameter, grinding wheels: cup or dish wheels, weight: approx. 450-500kg, machine dimensions X/Y/Z: approx. 800mm/800mm/1500mm. Inspection possible by appointment.

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Technical data Manufacturer: MSO / Cincinnati Milacron Universal cylindrical grinding machine type R-77 Center width 805 mm Grinding length 800 mm Tip height 130 mm Swing diameter 250 mm Workpiece weight between tips 75 kg Grinding wheel 400 x 40 x 127 mm Operating voltage 380 V / 50 Hz Configuration Includes extensive tool and accessory package Workpiece headstock and tailstock Hydraulic and coolant equipment Various grinding wheels and mounting flanges Clamping Devices, Abrasive Mandrels and Abrasives Measuring equipment and small tools Documentation / documents available Auction-ID: A7-46939-62

Graver grinding machine PARPAS type AUFabr. No. 854/36 Year of construction 1971Grinding wheel diameter 100 mmGrinding spindle speed approx. 3500 rpm. Motor power approx. 0.55 kWNetz connection 380 volts, 50 Hz- Socket for collets (system DECKEL with S20x2)- Collet 15.0 mm- Diamond grinding wheel dresser for the grinding wheel endSpace: L x W x H 700 x 350 x 450 mmWeight approx. 80 kgGood condition; used

Steel grinding block, steel grinding machine ULRICH KLINGEL type HSM 4Year of construction approx. 1976with 4 workstationsGrinding wheel diameter: 1x 100; 1x 150; 2x 200 mmGrinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kWNet connection: 380 volts, 50 Hz- 3x swinging grinding table- all 3 workstations with swivelling tables, feeding movement via handwheel- one workstation (the 4th) with swivelling and tilting table, feeding movement via handwheel- 1 piece diamond grinding wheel 100 mm is mounted (heavily worn)- 2 pieces

Universal grinding machine from Denius, manufactured in 's-Hertogenbosch (NL). Robust machine for the precise sharpening of various cutting tools: milling cutters, drills, reamers, turning tools, etc. Model on a heavy cast iron frame, equipped with a powerful motor and a table adjustable in several axes. Features: Brand: Denius Type: Universal Tool Sharpener Origin: Netherlands Power supply: Three phase (400 V) Cross table with micrometer adjustments Swivel tool holder Upper motor driving the grinding wheel Stable cast iron frame, ideal for precision work Estimated weight: approx. 250–350 kg Auction-ID: A3-43535-33357

Universal grinding machine from Denius, manufactured in 's-Hertogenbosch (NL). Robust machine for the precise sharpening of various cutting tools: milling cutters, drills, reamers, turning tools, etc. Model on a heavy cast iron frame, equipped with a powerful motor and a table adjustable in several axes. Features: Brand: Denius Type: Universal Tool Sharpener Origin: Netherlands Power supply: Three phase (400 V) Cross table with micrometer adjustments Swivel tool holder Upper motor driving the grinding wheel Stable cast iron frame, ideal for precision work Estimated weight: approx. 250–350 kg