universal tool grinding used for sale

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

Inv. Num. : 8838 Type: DMU 60 Producer: DMG Generated: Parameters: Control system: HEIDENHAIN TNC 426 PB Switch-on hours: 92023 h Hours: 33297 h Work table length: 630 mm Work table width: 500 mm Maximum table load (even): 500 kg X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Machine weight: 7500 kg

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.

Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes.

x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Parallel Lathe CAZENEUVE HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Spindle speed: from 20 to 1600 RPM Multifix Turret 3-jaws chuck Ø 250 mm Spindle motor: 8,8 kW Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Lubricant pump 3 points fixed steady - Max Ø 160 mm Voltage: 380 V Dimensions (L x W x H): 3500 x 1500 x 1800 mm Weight: approx 3 T

Table: 1850 x 800 mm Auction-ID: A7-32339-10

Parpas Omv FAS - 4 P Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 750 mm Max travel Z-axe: 700 mm Power on spindle: 2.2 kW Admission in boring head (ISO): ISO-40 Spindlespeeds: 80 – 3600 rpm Control: ECS AZ 200 CNC Weight: 8500 kg ACCESSORIES & TOOLING: yes Coolant pump: yes Toolholder: yes Number of tools: 20

Lathe SARO SP 1250x3000, working condition

arm length: 1600 mm taper MK: 5 : Würfel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

General SKU330W711 LocationBarneveld MakeCollette Gral Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity300 l., (260 l.) Vessel sizesDia. 840x600 mm With covercheck InletDia. 150 mm Pneumatic operated outletcheck OutletDia. 200 mm With jacketcheck With motor18/12 kW, 380 volt, 1465/975 rpm With lump breakercheck With motor7,5 kW, 380 volt, 2930/1460 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) Information Type300 Ex Pro high shear MR103 Mach.No.……. Year of construction1999 Mounted on framecheck Floorspace1,20x2,50 m Total height2,55 Extra SpecificationsHydraulic unit, 15 kW, 380-415 volt, 1420 rpm 2-doors control cabinet Universal mixersColletteMixers > Universal mixersBrand > Collette What you can expect fro ...

Machining center Deckel Maho DMU200P - Very good condition - Available Immediately - Worldwide Export Year of Make: 2003 Condition very good Stock number 0732 Control Heidenhain iTNC530 Clamping area 1,700 mm x 1,400 mm Spindle speed 12,000 rpm Spindle holder SK50 Tool magazine 60 places Internal coolant supply (IKZ) and chip removal package 40 bar Conveyor. Probe Heidenhain TS642 electr. Handwheel Heidenhain Operating mode 4 High-speed attachment spindle 42,000 rpm Tool Measurement Blum Laser

Key data: 500 mm, 400 , 400

Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!

Key data: 500 mm, 400 mm, 400 mm

DECKEL DMU 50T Heidenhain Control LE 412M Year of manufacture 2001 16-speed tool changer Working area 500 x 400 x 400 mm Feeds 5000 mm/min, rapid traverses 12000 m/min Direct displacement measuring system with rotary encoders (axes are displayed on the screen) Spindle speed max. 9000 rpm Rotary table B- and C-axis Coolant treatment El. Handwheel TFT Monitor Very good condition! If you have any questions, please feel free to contact Mr. Zölch directly: Tel. 0174-9119460 A viewing is possible by appointment. Second-hand goods are sold outside the warranty. Bought as seen. No returns.

Key data: 800 mm, 650 mm, 650 mm

Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410

Travel X/Y/Z: 800mm/400mm/440mm, table dimensions X/Y: 1285mm/355mm, quill stroke: 130mm, weight: approx. 2100kg. An on-site inspection is possible.

A Ho Chun universal tool milling machine is available. Travel X/Y/Z: 1250mm/540mm/470mm, spindle mount: NT#50, speed: 2000rpm, table spindle nose distance: 50mm-520mm, spindle power: 8kW, feed: 1200mm/min, rapid traverse: 2000mm/min, table dimensions X/Y: 1800mm/400mm, max. table load: 1000kg, machine weight: approx. 3600kg. Documentation available. On-site inspection is possible.

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...

A universal commercial dishwasher Hobart is available. Basket inner dimensions X/Y: 570mm/675mm, machine dimensions X/Y/Z: approx. 800mm/950mm/2050mm, weight: approx. 200kg. On-site inspection is possible.

- Universal dishwasher - Manufacturer: Meiko - Type: FV 250.2 - Type of current: 3 N/PE 400V 50Hz - Total electr. Connection: 22.9kW 38.4A - Boiler heater: 18kW 25.98A - Boiler capacity: 19.5 litres - Year of construction: 2020 - External dimensions approx.: 149x89x 193cm WxDxH

For sale is a MAHO MH 600 P universal tool milling machine with Heidenhain TNC 135 control. The machine comes from German quality production and is ideal for toolmaking, single part and small series production as well as training companies. The milling machine is robustly designed, precise and versatile. The universal design allows both horizontal and vertical machining to be carried out. Technical data: Manufacturer: MAHO Werkzeugmaschinenbau Model: MH 600 P Control: Heidenhain TNC 135 Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table size: approx. 250 × 1000 mm Spindle speed: approx. 50 – 2500 rpm Feed: infinitely variable Connection voltage: 220 / 380 V, 50 Hz Machine weight: approx. 1,900 kg Equipment: Universal milling head Automatic feeds Heidenhain Digital Display / CNC Control TNC 135 C ...

1 used: Universal milling machine, used • Manufacturer: Klopp • Model : FW 11/4 • Year of manufacture: unknown approx. 1970 • Table clamping surface: 1100 x 300 • Spindle mount: SK 40 • Swivelling milling head: 2x 110° • Spindle speeds: 40/80/120/240/480/960 • Feeds: 12-340 mm/min Accessories: Various holders and milling cutters, 1 set of collets Hydraulic vise with pneumatic support bolts Vise jaw width 160 mm

x-travel: 400 mm y-travel: 450 mm z-travel: 350 mm Control: Heidenhein iTNC 530 : 68 fach tool adaptor: HSK 40E turning speeds: 30.000 U/min fixed table - dimensions: 300 x 400 mm mm workpiece weight: 200 kg pallet table size: 320 x 320 mm feed speeds autom. x/y/z: 40 m/min. spindle drive motor: 13 kW Number of working hours: 32369 h total power requirement: 16 kW weight of the machine ca.: 7.500 kg Machine still in the delivery factory: Condition: ready for operation: CE signed: Electric 380 Volt: Palett changer: 7-fach Cabin: Tool magazin places number: 68 High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic  ...

Code: 0280 Brand: DIMA CEFLA Model: KLEIN/S - CE Standard Universal sanding machine for straight and curved pieces of wood, furniture, doors, frames, panels, composite materials and various - CE Standard Brush diameter 200 mm - Height adjustable shaft Sanding disc diameter 230 mm Motor 2,2 Kw Electronic speed variator Work surface dimensions 1400 x 920 mm Work surface dimensions with extensions 2200 x 1200 mm Work surface height 900 mm Suction inlet diameter 150 mm Overall dimensions mm 1600 x 1100 x 1150 h Weight kg 900

5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of Make: 2016 Travels: X-axis 500 mm Y-axis 450 mm Z-axis 400 mm B-axis °-5/+110 C-axis °360 Clamping surface rotary axis: Ø 630 x 500 mm Mount: SK 40 Tool Magazine: 32 Slots Speed: 12,000 rpm Accessories - Chip conveyors - 3D Probe Infrared - Table button

Key data: 990 mm, 390 mm, 590 mm

For sale is a robust and powerful universal milling machine of the brand DECKEL, type FP33. The machine impresses with its high stability, generous travel distances and SK50 tool holder – ideal for workshops, maintenance or manufacturing companies with high requirements. Technical data: Manufacturer: DECKEL Type: FP33 Tool holder: SK 50 Travels:  • X = 990 mm  • Y = 390 mm  • Z = 590 mm Table size (L x W): 1200 mm x 1000 mm Spindle speed: 31.5 – 1600 rpm Motor power: 5.5 kW Machine weight: approx. 4,500 kg Dimensions (L x W x H): 3300 x 2500 x 2000 mm ⚙️ Condition & Notes: Good general condition (more details on request) Delivery: Loading on truck possible Viewing possible by appointment

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible.

A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.

A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.

Key data: 800 mm, 510 mm, 550 mm

Universal Machining Center Manufacturer: Reiden Type BF1 Year of manufacture 1997 Control Heidenhain tnc 407 Travel X/Y/Z 800/510/550 Clamping surface D 630mm Table load 800kg max. speed 3100rpm 24 Way Tool Changer Tool holder SK40 Chip conveyor Monitor new, central lubrication new, rotary encoder rotary table new, glass scale X-axis new. The machine is 100% functional, ready for immediate use. For more information, I am always available at 01778957069.

Key data: 750 mm, 650 mm, 560 mm

Universal CNC Machining Center Manufacturer: DMG Mori Type DMU75 Monoblock Year of manufacture 2014 IBN 2015 Control Heidenhain iTNC530 Control a 23.075h Engine a 22.287h Program run 12.946h Operating hours 12.891h Travels X/Y/Z 750/650/560mm Table size 800 x 650mm Table load 600kg C-axis b-axis -120° + 120° Tool holder HSK63 60 Compartment Tool Magazine IKZ 40bar Blum Wireless Push Button Electronic Handwheel HR410 Belt filter system 500l Motor power 35kW Torque 130/86/0 Machine is in a used very good condition. Geometrically very good. Without vice, without tool holders

Key data: 400 mm, 375 mm, 250 mm

With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.

This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information.

This 5-axis +GF+ MIKRON HPM 1350U was manufactured in 2018. Ideal for advanced machining, this universal machining centre ensures precision and efficiency. Consider the opportunity to buy this +GF+ MIKRON HPM 1350U universal machining centre. Contact us for more information.

This 5-axis HAAS UMC-750 was manufactured in 2020, featuring a 762 mm X-axis, 508 mm Y-axis, and 508 mm Z-axis. It includes a spindle speed up to 12,000 rpm, ISO 40 taper, and a robust 40-position tool changer. The machine supports a maximum table load of 300 kg and offers advanced features like a wireless probing system, chip conveyor, and through-spindle coolant. Consider the opportunity to buy this HAAS UMC-750 universal machining centre. Contact us for more information.

This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information.

This 5-axis POSmill H 800 U was manufactured in 2018. It features a 670x830x600 mm travel range, a swivel range of -120 to 120 degrees, and a continuous 360-degree rotary table. Equipped with an 18,000 rpm milling spindle, 96-position tool changer, and Heidenhain iTNC530 control, this universal machining centre is ideal for complex machining tasks. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information about this machine.

This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information.

This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information.

This 5-axis DECKEL MAHO DMC 70 Evo was manufactured in 2007. It features a HEIDENHAIN TNC 530 CNC control, HSK 63, and a spindle speed of 15,000 rpm. Includes a pallet changer with a size of 500 × 500 mm and a high-pressure through-spindle coolant system. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMC 70 Evo machine we have for sale. Contact us for more information about this machine.

This HAAS UMC-500SS Vertical Machining centre was manufactured in the year 2021 in the United States and has 305 spindle hours. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm. The 2 units are available.

This 5-axis DMG Sauer Ultra sonic 50 universal machining centre was manufactured in 2006. It features a Siemens 840 D control system, a 16-fold tool changer, and a fully protected cabin with safety doors. The table size is Ø 630 x 500mm, supporting a load of 200kg. Ideal for diverse machining needs, the DMG Sauer Ultra sonic 50 machine we have for sale is a robust addition to any workshop. Contact us for more information.

This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine.

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine.

This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information.