134,660 used machines on RESALE, but how to find them? Machine Search
Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T
GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Cross520 mmLongitudinal650 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct t ...
GeneralVertical-Machining centre Stealth Design; Control: CELOS with Heidenhain TNC 640 Technical DataRapid traverse longitudinal/transverse/vertical42/42/42 m/minFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minWorking area 1Cross700 mmLongitudinal1450 mmVertical550 mmIntegrated motor spindle speedMASTER®Integrated motor spindle speedMASTER® At speeds > 18.000 min-1, the use of tools with dual contact system (BIG-PLUS®) is stipulated.Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTableTable surface 1760 x 750 mmClamping System DIN ISO 7388-3-ADSpindle taper SK40 Tool holder DIN ISO 7388-1-ASpeed range - 20000 rpmTorque (40% DC) 130 NmSlot width 14 mmMaximum load (table centre) 1500 KgNumber of Slots 7Distance between T-Slots 100 mmCabin roofCabin roof In sheet steel design Open and close via front doorSpecial equipmentClamping pneuma ...
GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard)Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rateInternal coolant su ...
GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, ...
CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgGeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate Spindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rat ...
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsMaximum load (table centre)800 KgDimensions (L x W x H)3,3 x 2,7 x 2,94 mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z800/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1100 x 560 mmWeight approx.5550 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SysteminlineMASTER® spindle 12.000 rpminlineMASTER® spindle 12.000 rpm Spindle speed range 20 to 12.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 13kW (40% DC) / 9kW (100% DC) Torque: 83 Nm (40% DC) / 57 Nm (100% DC) bearings oil-air lubrSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872NC-D ...
Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air wi ...
Key data: 700 mm, 450 mm, 450 mm
Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T
Universal machine (cutter, kneader, mixer, stirrer) in stainless steel design, primarily for the production of foodstuffs such as sausages, pasta products, sauces, etc., speed can be switched in two stages (680 / 1,430 rpm), drive power 3.3 / 4.5 kW.
GeneralVertical Machining centre; Control: DMG MORI ERGOline X Multi-Touch control CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Func ...
used
Turning diameter 900 mm Turning length 5000 mm
Key data: 700 mm, 250 mm, 350 mm
Universal Milling Machine ERNAULT SOMUA HES ZHV1 Travel X : 700 mm Travel Y : 250 mm Travel Z : 350 mm Rotation : from 40 to 2000 RPM Table size : Length 1200 mm x Width 300 mm Vertical/horizontal universal swivel head Scale 3 axes EAE Rapid 3 axes Voltage380 V Width: 2000 mm Depth: 1800 mm Total height in height: 1600 mm Weight: approx 1,5 T
Key data: 500 mm, 200 mm
Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal -Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock CoverAir coolant internal (through spindle centre)Air Coola ...
GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low o ...
Universal Crimping Machine, Border FASTI Type 81504 - UBPB 1,5Masch. No. 828152 001 Year of construction 1982Sheet thickness max. 1.5 mmPlate thickness min. 0.5 mmBoard height max. 12 mmBoard height min. 4 mmThroughput speed 4 / 8 m/min. Roll diameter 60 mmmin. Inner radius of curvature for 90 elbow piece 100 mmDrive power 1.1 / 1.4 kWNerg connection 400 volts, 50 Hz- Sheet metal guide- Operating instructions (as copy)Space requirement L x W x H 700 x 610 x 1250 mmWeight 150 kg; used
x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm total power requirement: 25 kW weight of the machine ca.: 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 Partially reconditioned in Year 2007 by MMD Company _____________________________________________________________ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axi ...
x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm total power requirement: 1,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm B-axis (table): +120/-35 Grad c-axis: 360 Grad control: HAAS für 5 Achsen tool piece magazine with: 40 Plätzen number of spindle speeds: 12000 U/min dimensions of the machine ca.: 4.3 x 2.35 x 2.8 m weight of the machine ca.: 8.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: HEIDENHAIN TNC-430 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm B-axis (table): 280 mm table swivelabel +/-: 220 (+/-110) ° -C-axis table rotating: 360 ° tool magazin:: 30 spindle taper: HSK63 spindle turning speed - stepless: -15000 U/min rapid traverse feeds rotary table: 36 U/min rapid travel x/y/z: 36 m/min Overall size: 3800X3600X3000 mm weight of the machine ca.: 8.5 t Coolant through spindle: pressure: 40 Bar 3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: SIEMENS 840D www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8441 Type: KOMBI 1000 Producer: Reckermann Generated: Parameters: Work table length: 1370 mm Work table width: 400 mm X-axis travel: 1000 mm Y-axis travel: 350 mm Travel Z axis: 450 mm
x-travel: 1000 mm y-travel: 600 mm z-travel: mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool holder ISO 40, travel distances 800 x 300 x 400, 18 spindle speeds 40 - 2000, 18 feeds 10 - 500, rapid traverse, spindle motor 2.2 kW, Spindle backlash X-axis 0.3 mm, Y-axis 0.2 mm Bellows in X and Z axis new
Stock number: R1144, Litre: 350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Grinder, Standing: On wheels, Construction: Combined mixer, pre-chop and emulsification machine with circulation, Motor: 9/18,5 kW - 380 Volt, Manufacturer: KS universal, Type: B 22, Year: 1973
Stephan PrimeCut12 Universal Machine Two speeds: 1440/2880rpm Stainless steel kettle removable transparent plastic lid Crank for actuating the mixing blade Machine has considerable signs of use, the lid is covered with hairline cracks due to cleaning in the dishwasher, which do not impair the function, but are unsightly. Just like the stirring blade in the lid. The machine is equipped with a knife insert and a mixing insert and should always be thoroughly cleaned before use. Video about the test run available on YouTube
Key data: 300 mm, 150 mm, 300 mm
Universal Milling DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg
BERNARDO Variomill FU 2000E Servo universal milling machine was built in 2020 in Austria by PWA Handelsgesellschaft m.b.H. The machine, distinguished by its stable design made of grey cast iron and the use of modern technologies, is the perfect choice for machining heavy, oversized workpieces. All linear axes are driven by high-performance servo motors, which guarantee appropriate accelerations and feed rates in each direction. What’s more, the X axis has been coated with a special Turcite B coating to reduce the effect of slippage. All of this, combined with extensive equipment, maximises the precision and repeatability of the produced parts, even during the most intense challenges. The Variomill FU 2000E Servo vertical milling machine weighs 4500 kg. Technical specifications of the BERNARDO Variomill FU 2000E Servo milling machine - feed in the X/Y/Z axis: 1400/700/500 mm - rapi ...
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...
CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...
Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.
Universal temperature control unit WEINREICH type WTD 4Temperature control unit with electric heating and connections for external coolingFabr. No.: 11932217 year of construction 1993Temperature max. 140CBorcing pressure max. 6 barPump capacity 30 l/min. Tank volume 4 litresHeating capacity 4 kWeergisation capacity heat exchanger 15 kWCotor capacity of the pump 0.37 kWUmrune water supply + return G 3/8Cooling water flow + return G 3/8Total capacity 4.4 kWNe-connection 380 volts, 50 Hz, CEE plug-in temperature control medium water
Stephan UM44 Universal Machine two speeds 1450/2900rpm with knife insert and meat grinder Tiltable for removing the processed medium neat condition, should still be thoroughly cleaned before use Video about test run available
A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.
Parallel Lathe WABECO D6000E Between points: 600 mm Maxi Ø on bench: 270 mm Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller ...
NC Lathe Gildemeister Nef 500 BJ 1996
x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: SINUMERIK 840D pl spindle turning speed - stepless: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.
Key data: 500 mm, 400 mm, 400 mm
FP 4M lid with 3-axis active digital display, Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Incl. accessories as shown
frequency: 50 Hz weight of the machine ca.: 2,510 t dimensions of the machine ca.: m 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30 x 14.3 Max Table Load: 550 LBS X Axis: 24 Y Axis: 12 Z Axis: 20.47 Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3.000 mm y-travel: 1.000 mm z-travel: 860 mm Control: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mm T-slots: 7 x 18 T - slots distance: 125 mm distance table - lower edge spindle: 25-366 mm table weight: 4.200 Kg b-axis: +-105 ° c-axis: +-360 0 rapid travel x/y/z: 30.000 mm/min rotary table: Durchm. 1.000 mm max. turning diameter: 1.400 mm number of spindle speeds: 9.000 U/min/rpm tool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kW max. torque on the spindle: 240 Nm tool change unit: AITEK, 40 fach : 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bar total power requirement: 65 kW weight of the machine ca.: 24,8 t dimensions of the machine ca.: 8.056 x 5.496 x 3.790 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4000 mm y-travel: 1000 mm z-travel: 1500 mm Control: Heidenhain 355 weight max.: 10 t head swivability: ° : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.
maximum number of results exceeded
please refine your search
