universal tool grinding used for sale

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 210 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1400 mm Width: 510 mm Height: 1300 mm

Item no. 5032: 1 gebr. Universal tool milling machine Fabr. DECKEL, type FP 2 active, Bauj. 1981 with 3-axis active digital display Heidenhain Arb.-Ber.: 400 x 220 x 400 mm, drive power: 2 kW Accessories: Rigid table 700 x 330 mm Foldable splash guard cover with chip trap tray Machine feet, Documentation Other: Spindle holder SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to For further data, please refer to the attached data sheets

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)

Various SK50 tool holders are available for sale. Size: SK50 Standard: DIN 2080 Various different designs, such as: - Collet chuck - Weldon chucks - Combi clip-on milling mandrels -Knife head attachment -Intermediate sleeves for MK with exfoliating flap -NC - Drill chuck -etc. All tool holders are sold without tightening bolts

Dieburg Pronto 5035 CNC Die-sinking EDM machine

Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm

Manufacturer: Lid Type: FP 4 MA Year Built:1987 Control: Contour 2 control Working area: 485 x 385 x 380 mm Feed speed: 1-3000 mm/min Pinole stroke: 80 mm Main drive: 4 kW Number of rotating pins: 18 Spindle speeds: 63...3150 min Tool holder: SK 40 Table load: 600 kg Weight: approx. 1850 kg Dimensions without control panel: 2000 x 2400 x 2000 mm We will be happy to send you further information and pictures on request.

Technical data Nominal volume flow: 630 m3/h Max. inlet temperature: 70 °C Machine´s weight about: 94 kg Dimensions: Length: 625 mm Width: 555 mm Height: 975 mm

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 130 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: Working bench: Length: 200 mm Width: 700 mm Height: 900 mm Cross slide with 90 mm stroke

Technical data Table length: 800 mm Table width: 700 mm

Technical data Centre height: 300 mm Distance between centres: 2000 mm Swing in gap: 740 mm Spindle hole: 90 mm Spindle speeds: number (steps): 24 from: 9.5 rpm up to: 1854 rpm Feeds: number (steps): 24 length: from: 0.04 mm/r up to: 12 mm/r Frontal: from: 0.02 mm/r up to: 6 mm/r Voltage 50 Hz 3x: 380 Volt Various accessories: 3-jaw chuck diameter: 300 mm 4-jaw chuck diameter: 500 (2x) mm Fixed steady Toolholders Set of centers Drilling tailstock

Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1300 mm Various accessories: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm

Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Spindle taper: 40   Positions ATC: 0   SPECIFICATIONS X - Travel   450 mm Y - Travel  300 mm Z - Travel  350 mm Controll  3 axis Dro Table Length x Width  800 x 400 mm Table load in kG  400 Kg Spindle Taper  Sk   40 kW power on spindle  3,2 kW Spindle speeds / ranges  50 - 2500 Rpm  

CNC tool milling machine MIKRON type WF 21 D CNC path control Heidenhain TNC 355 Masch. No. 5241010 Year of construction 1990 Travel X: 450 mm Y: 400 mm Z: 400 mm Table size 700 x 350 mm Spindle mount ISO 40 Spindle speed 40-4000 rpm. 21 stages Feed rate 2-3000 mm /min. Rapid traverse X and Y 6000 mm/min. Rapid traverse Z 5000 mm/min. Nail displacement 90 mm Distance table - spindle nose max. 450 mm Main spindle drive 3.3 and 4 kW - Splash guard table housing - Coolant device - Central lubrication - Control cabinet fixed to the back of the machine- electronic handwheel - 55103 Hours of switch-on space L x W x H 3000 x 2700 x 2000 mm Weight 2400 kg very good condition; used

SPECIFICATIONS: Machining max mm: 330 Spindle diameter mm: min 100, max 300 Voltage: 220 V Tool measuring and display system for optical measurement of tools

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25/H25 mm -Weight: 1 kg

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

Specifications: - Table size 950 x 450 mm - Working range of the axes - X (longitudinal) 560 mm - Y (transverse) 320 mm - Z (vertical) 400 mm - distance milling spindle – angle table 510 mm - Tool holder SK 40 - Working spindle speeds adjustable in 18 stages 25 - 2000 rpm - Drilling spindle stroke 100 mm - Feed speed of the axes up to 1200 mm/min - Rapid traverses - Drive 400 V / 3 kW - Space requirement approx. W 1200 x H 1650 x D 1000 mm - Weight approx. 1700 kg - with : - 3 A. – Digital display - Coolant device - fixed angle table

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Tensioning tool: 270 mm -Groove: 14 x 36 mm -Dimensions: 270/20/H50 mm -Weight: 2.0 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Inside diameter: 62 mm -Dimensions: 130/100/H86 mm -Weight: 3.7 kg

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp

Tool holder, extension -Shaft mount on both sides: Ø 71 mm -Drawing with the pictures -Transport dimensions: 1650/800/H450 mm -Weight: 370 kg

range L-W-H: 620 x 330 x 700 mm weight: 28,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual crimping tool hydraulic operation, swappabble, different sized heads. Heads: 6 set Manufacturer: DUBUIS Outillages Machine type: C130L Pressing force: 130kN Max opening width: 38 mm Max cross section: 400 mm² Overall size: 580 x 70 x 160 mm

LVD PPEB 80 CNC Press Brake with tools Machine is in good condition Many tools come with the machine

Muratec Motorum-2044EZ CNC Punch Press Many tools are included 22 station 2 index Machine is regularly serviced Machine is in good working condition

Durma TP 93 CNC Punch Machine 20 Ton All tools are included

Tiller-guided lift truck make SCHEFER type 1101030SpecialMasch. -No: 12011904-1 / 013 year of construction 2012Max. Lifting capacity: 1.0 tLifting height: 166 mmFork width: 160 mmFork length: 2500 mmWeight approx: 180 kgWith- CE markused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool presetting device make ZOLLER type H 4000Machine -No: FC II 4000/039, built in 1985Measuring range: 320 x 270 mmProjector diameter: 150 mmMagnification: 20 timesMeasuring system: Heidenhain LS 503 DOutside dimensions: 1490 x 650 x 1850 mmelec. Connection: 220 V / 50 HzWeight: 350 kgWith- Input unit type 6080- Tool holders ISA 50usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool Presetting Machine make SOMET type SPS 200 UK 019 200 No: S 4/194 built in 1987Outside dimensions approx: 660 x 730 x 1600 mmWith- Profile projectorused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool presetter Fabr. MESSMA KELCH ROBOT Type Trabant 273 EA 6Machine -No: 2224 Year 1986Measuring range longitudinal axis: 270 mmTransverse axis measuring range: 270 mmScreen diameter: 150 mmMagnification: 20 timesGraduation with vernier: 2 x 0 - 180 °Weight approx: 510 kgOutside dimensions approx: 985 x 730 x 1300 mmWith- Measuring electronics EA 6- 2-axis digital display- rotatable 3-way tool holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool presetting device make ZOLLER type H 4000 / H 4012/132Year of construction 1988Technical specifications:Turntable diameter: 750 mmNumber of tool holders: 4External dimensions approx: 2000 x 850 x 1700 mmWith- 2-axis digital display Zoller 6051- Profile projectorused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Circular Saw - Feed Unit Make EISELE Type SU 073Fabr. -No: 0739 built in 1988Max. Feed length: 920 mmBaking height: 65 mmOpening width of the vise: 200 mmDimensions: 1350 x 900 x 1150 mmWith- double repeating deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Height adjustable roller conveyor make TRANSLYFT type TLH 2500Machine -No: 000290 Year 1990Roller conveyor width: 400 mmRoller conveyor length: 6000 mmSupport table size: 800 x 6000 mmLoad capacity: 2.5 tDimensions L x W x H: 6000 x 800 x 1000 mmWith- 4 built-in scissor lift tablesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cabinet with tools for honing machine make NAGELCabinet size: 750 x 520 x 1460 mmNumber of drawers: 24Content consisting of- Honing tools- Recordingsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

FaceplateDiameter: 900 mmPlate thickness: 135 mmSpout flange to: DIN 55027/8used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brand new three-jaw lathe chuckChuck diameter: 250 mmLining hole: 85 mmRecording: Camlock 8:: 136.3 / 139.2 mmWith- 6 locating bolts- reversible, screw-on top jawsSpecial pricePrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

This HAIMER UNO 20/40 Smart Microset Tool Presetter was manufactured in the year 2022. It is equipped with a VIEWSONIC control unit.

Two-jaw lathe make Fabr. BISON steel versionYear of construction 2008Chuck diameter: 250 mmBore: 75 mmWith- 1 set of base jaws- 1 set of soft top jaws- cylindrical flange receptacle- square keyunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi spindle drilling head make SAWAS type SBS Gr. IIFabr. -No: 10957 Year 1995Number of taps: 6is: 4Spacing of the drill spindles: 65 mmPosition of the spindles: m lineGear ratio: 2External dimensions approx: 400 x 300 x 350 mmWith- Adapter flange for Alzmetall SB machinesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 item = 44 drilling spindle carrier make BOLEY type W and type U1 item = 32 articulated spindles make BOLEY type W and type Uused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PRAMET type S25T-PWLNR08KT306 lathe chiselPRAMET type S32U-SDUCR11-A830102 lathe chiselPRAMET type S40U-PCLNR lathe chiselusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Test mandrelTechnical specifications:Diameter: 49.999 mmLength: 330.324 mmRecording: ISA 40unusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deep hole drill make SASSEXTechnical specifications:Drilling depth: 400 mmDrilling diameter: 60 mmTool holder: MK 5Overall length: 590 mmWith- Internal coolant supplyusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 lot = 46 broachesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools