We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
used
HM Corner - Cutter Head - Face Milling Cutter with Inserts. Diameter: 315 mm. Height: 90 mm Bore diameter: 62 mm. Number of inserts: 18 pieces Dimensions of the inserts: Rectangular, 12.8 x 12.8 x 5 mm, positive. Good used and ready to use, without damage to the panel seats. Shipping possible in consultation with the forwarding agent. or self-collection. The part can be viewed in consultation and is immediately available.
used
Controller FANUC Panel i Sowftware Tool Studio 3 Lisances : MCS, TS_Standard, Profile light, Drills, Calib touch probe, Boost, Steptools
used
–Manual – CE certificate – after technical inspection – very good condition – year of production 2014 - standard feeding table 3m +3m additional = 6m TECHNICAL PARAMETERS: main motor 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed rate adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls diameter of discs 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor belt three take-up rollers stub diameter 2 x 200 mm dimensions length/width/height 300 x 245 x 180 cm weight ~ 3000 kg
used
WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg
used
Walter WDPP-410 edger – Polish production – DTR, CE TECHNICAL PARAMETERS: min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/min mains voltage (50 Hz) 3×400 V machine dimensions (length/width/height) 6900 / 1400 / 1380 mm machine weight 1300 kg
used
– Polish production – DTR, CE – year of manufacture 2011 TECHNICAL PARAMETERS: minimum length of material after formatting 800 mm maximum length of material after formatting 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm smoothly adjustable feed 0-20 m/min main motor power 2 x 5,2 kW feed motor power 1.5 kW machine dimensions (L/W/H) 340 / 230 / 180 cm weight 2500 kg
used
Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)
used
The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 " - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 " - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700 ...
used
Tool grinding machine Walter UWS30 CY - original condition - Width: 120cm - Height: 140cm - Depth: 100cm - with electric stroke adjustment - Sub-machine, 8 grinding shots - Grinding wheel pulling device - Electrical documentation + equipment Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.
used
Little used and is very well maintained, factory No. 3791, in execution with degree - and indirect sharing using disc of part of. Table size 500 mm diameter Height 150 mm Length 710 mm 590 mm width (without drive) T - slot width 16 mm Gear ratio 1: 120 Weight 180 kg Accessories: Part of disc, operating instructions.
used
Swivel part ingenous from Walter type HU 150E Peak height is 150mm. Direct divisions via perforated disc possible. Division 1 -24 Haohtcz Indirect sharing is no longer possible, a worm wheel is missing. Use on fraes and drilling machines For more information on request, please note the photos. Special price
used
1 piece of plan knife head 210 mm 12 Cutting 1 piece corner corner fraeser WALTER 200 mm, F2010 12 cutting Further: Diverse crankshaft fraeser GFM
used
used
2 stubof disc sores WALTER 125 mm, F2052 1 stueck prism fraeser Walter F2052-460 170.6 / 171.2 2 piece disc freser WALTER 142 mm, F252-925
used
used
Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price
used
Max. relative humidity: 95%, max. operational pressure: 130bar, medium output: 23l/min, ambient temperature: 5-35°C, connected load: 6.5kW, weight: 80kg, with instruction manual, the system is unused.
used
centre height: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
3-SAW PLATFORM (EXTENDABLE) WALTER FWR 500 (3x7.5kW) min. length of the material after formatting 2x800 mm max. material length after formatting 2x1200 mm max. material width 480 mm max. material thickness 145 mm circular saw diameter 500 mm power of spindle motors 3X7.5 kW saw rotation speed 2850 rpm 1.5 kW shaft drive motor power 1.5 kW feed drive motor power rotational speed of drive motors 1425 rpm feed speed continuously adjustable 0-20 m / min mains voltage (50Hz) v 3X400 overall dimensions length / width / height mm 3980/2440/1400 machine weight kg 1700
used
3-SAW PLATFORM (EXTENDABLE) WALTER FWR 500 (3x9.2kW) min. length of the material after formatting 2x800 mm max. material length after formatting 2x1200 mm max. material width 480 mm max. material thickness 145 mm circular saw diameter 500 mm power of spindle motors 3X9.2 kW saw rotation speed 2850 rpm 1.5 kW shaft drive motor power 1.5 kW feed drive motor power rotational speed of drive motors 1425 rpm feed speed continuously adjustable 0-20 m / min mains voltage (50Hz) v 3X400 overall dimensions length / width / height mm 3980/2440/1400 machine weight kg 1700
used
3-SAW PLATFORM (EXTENDABLE) WALTER FWR 500 (3x5.2kW) min. length of the material after formatting 2x800 mm max. material length after formatting 2x1200 mm max. material width 480 mm max. material thickness 145 mm circular saw diameter 500 mm power of spindle motors 3X5.2 kW saw rotation speed 2850 rpm 1.5 kW shaft drive motor power 1.5 kW feed drive motor power rotational speed of drive motors 1425 rpm feed speed continuously adjustable 0-20 m / min mains voltage (50Hz) v 3X400 overall dimensions length / width / height mm 3980/2440/1400 machine weight kg 1700
used
Suitable for eroding PCD tools for the wood and metal industries as well as for regrinding and making new ones of all kinds of wood and metal working tools. Accessories: Total enclosure,, Stepless variable speed control,, Measuring probe,, Glass scales on the linear axes (X, Y, Z),, Software package Toolstudio Standard & Advanced Version 2.0, Software package 1 (cylindrical tools with sharp edges, corner and full radius),, Software package 2 (conical-spiral tools with sharp edges, corner and full radius),, Software package 3 (drill and step drill),, Software package 16 (warm-up program),, Software package 18 (dressing), Software package 51 and 52 (rotational erosion and PCD tools such as shank, circular, profile, step milling cutters etc.),, Software package P52 option High spiral tools>60,, Software package P58 (hogger), Electrostatic mist extractor,, Bandfilter with pump 400 L,, Automa ...
used
Suitable for fully automatic and touch-less measuring of cutting tools of all kinds. By means of 2 CCD matrix cameras, reflected-light and transmitted light measurements are performed. For example diameter, length, angles, spiral angle, spiral length, clearance angle, cutting angle etc. can be measured. Accessories:, Pneumatic workpiece clamping,, Windows 7 PC + QCM 8.0, software VIALOGIC TIM Teach-In-Mode,, software package 1 (cylindrical tools sharp edge, corner and full radius),, software package 2 ( conical-spiral tools sharp edge, corner and full radius),, Software VIALOGIC Viascan,, QCM Network,, LightControlDevice,, Glass scales on the linear axes., Traverse X-axis: 200 mm, Y-axis travel: 350 mm, Z-axis travel: 250 mm, A-axis speed: 60 rpm, Workpiece holder: ISO 50, Workpiece diameter: 3 - 200 mm, Workpiece length: Max. 300 mm, Workpiece weight: max. 40 kg, Connected load: approx. ...
used
Description: Twist drills, taps, twist drills with excess length, solid carbide milling cutters, milling cutter head inserts, WIDIA indexable inserts, two-flute drills B4213.F25.20.Z1.060R-2, in 2 aluminum transport cases Approx. Onsite Dimension. (l x w x h): 500 x 400 x 150 mm, weight approx.: 10 kg
used
Description: Mounted chuck, diameter 160 mm Approx. Onsite Dimension. (l x w x h): 400 x 300 x 300 mm, weight approx.: 35 kg
used
Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: the minimum length of the material after formatting is 800 mm the maximum length of the material after formatting is 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm feed continuously adjustable 0-20 m / min main engine power 2 x 5.2 kW 1.5 kW feed motor power dimensions of the machine (length / width / height) 340/230/180 cm weight 2500 kg
used
Walter WD 425/400 KBA multi-saw (15 kW) max. thickness of the cut prism 145 mm max width of the cut prism 400 mm spindle diameter 70 mm spindle length working part 330 mm circular saw diameter 250 - 425 mm spindle wedges (x2) 20/50 main spindle motor power 15 kW rotational speed of the spindle drive motor 2900 rpm power of the feed drive motor 2.2 kW engine speed (feed drive) 1425 rpm feed speed (continuously adjustable) 0-13 m / min overall dimensions length 3050 mm overall dimensions width 1410 mm overall dimensions height 1410 mm machine weight 1800 kg mains voltage 3 x 400 V, 50 Hz
used
Walter WDPP-410 edger The WDPP-410 flashing machine is widely used in many sawmill plants. The design of the machine and the principles of its operation allow for quick recovery of purchase costs and limiting raw material losses to a minimum. Reliable operation and safe operation of the saw translate into a high efficiency rate. – Polish production – DTR, CE min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/m ...
used
Description: Tool sharpening machine , Serial number 660007 Axis travels: - X-axis (longitudinal): 350 mm - Y-axis (vertical): 200 mm - Z-axis (transversal): 470 mm - C-axis (round table, swivel range): ± 200°. Maximum working speeds: , - X-/Y-/Z-axis: 15 m/min - C-axis: 120º/s Workholding length (A-axis): 150 mm Taper ISO 50 Axis rotation: ∞ Working speed: 60 Rpm Center height with/without table: 130/160 mm Maximum workpiece diameter: 100 mm Maximum workpiece length (peripheral sharpening): 270 mm Max. workpiece length (front grinding): 200 mm Accuracy: Linear resolution: 0.0001 mm Radial resolution: 0,0001º Spindle head with 2 spindles Spindle diameter: 70 mm Maximum diameter of the grinding wheel: 150 mm 3 cooling valves at each spindle end Maximum power: 9 kW Spindle torque: 6 Nm / 6000 Rpm Spindle speed: 0 - 9500 Rpm Integrated cooling system Capacity: 3 ...