universal milling head used for sale

Masch. Ref. 23649

throat: 760 mm flange:: 500x500 mm Width of nail head: 230x170 mm tool adaptor: nach DIN power requirement: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter -Diameter: 160 mm -Number of teeth: 10 -Tungsten carbide inserts: 16 mm -Adjustment: SK50 -Weight: 14 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 140 mm -Height: 185 mm -Max. 8 divisions can be set -Bore center: Ø 35 mm -Weight: 30 kg

Rotary table, rotary indexing table, dividing head, dividing head -Four-jaw chuck: Ø 165 mm -Height: 185 mm -Dimensions: 240/320/H185 mm -Weight: 24 kg

Very nice old Toledo scale, calibratable, up to 120 kg

Riggs twin head depositor Model: 1000 Serial: TT1310 2011, twin head depositor, previously used for filling food grade oils 10l - 25l, with cycle counter

faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylinder head overhauled 146673-11050 Assy 746674-11121

Closing heads ALCOA for plastic screw caps pick-and-place PCO 28 mm tested and ready to work

Closing heads Krones for aluminium screw caps suitable for several types of closing machines like Alcoa, Adelski, Arol, etc. tested and ready to work

Wartsila Nohab WN 25 cylinder head complete with rocker arms and valves Std sized seat bores Free of cracks and weldings Used but in good condition In our stock in Istanbul Please contact : info@fin-marine

Bergen L 32:40 P cylinder head covers complete. 6 pieces available also available all other major parts like: connecting rods, pistons, crank shaft, turbo charger, camshaft piece , fuel pumps etc. In our stock in Istanbul Turkey Please contact us at: info@fin-marine

Recon Part Number: 1231 3228 Diesel Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

WICHMANN AXAG - AXA Cylinder head covers 18 pieces available In good condition Free of any cracks and free of welding Suitable for AXA and AXAG type engines In our stock in Istanbul Turkey Please contact us at : info@fin-marine

Wartsila 46 cylinder heads reconditioned by Wartsila Free of any cracks or welding Water pressure and crack tested In our stock in Istanbul Turkey Please contact: info@fin-marine

Sulzer RT FLEX 58T-B Cylinder heads complete 5 pieces available New, never used Other major parts also available In our stock in Istanbul please contact: info@fin-marine

SEMIAUTOMATIC FILLING LINE 6 HEADS The machine is locatd in Italy.

- Please note! Price per piece! - Suitable for TCG 2020 V12 - 12304116 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

accuhead machine, 300 kN clamping force. Extruder 80/24D. Accuhead 5 ltr. Die dia from 20 to 200 mm. mould dimensions: 800 x 700 x 2x250 mm (LxWxD) Spreading device, needle blow, waste punch, interval blowing, core pulls. Machine can be viewed under power until the end of January 2022

We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information

on photo

RECON Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003

Two Head Linear Labeler Year of manufacture: 2018 label height: 150mm

Single head labeling machine for labels max h70mm, with a max production of 6000b/h. DOCUMENTATION AVAILABLE

Labeling head, for label width max. 150mm Maximum production: 30mt/sec Connection: 220V single phase. DOCUMENTATION AVAILABLE

SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...

Cylinder head 413 7 x with three-hole bore Condition from new to used 2 x with two-hole bore Condition new and used

Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 90° Ratio: 1:1 Tool holder: SK 50

Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 60° Ratio: 1:1 Tool holder: SK 50

Manufacturer: Griesinger Type: IKF Milling Head Type 2 Car

Manufacturer: Alberti Type: T90-3.5

weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 500 x 210 x 270 mm

Description: For FMB 90 mm Mounting: 35 mm weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

diameter:500 mm tool adaptor:50 Weight:12 kg face movement each head:82 mm feeds:0,06 mm/U

throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm

diameter:400 mm tool adaptor:MK 5 Weight:10 kg Slide cross:52 mm Good condition Wohlhaupter facing head with Morse taper 5

diameter:300 mm tool adaptor:40 Weight:5 kg Taper ISO 40

diameter:200 mm Weight:4 kg

diameter:400 mm tool adaptor: 50 Weight:12 kg slide adjustment:52 mm feeds:0,02 - 0,24 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Tool taper:22 mm

diameter:280 mm tool adaptor: 40 Weight:12 kg slide adjustment:50 mm feeds:0,05 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Boring head complete with box and accessories

Working width 1300 mm Working height 880 - 940 mm Workpiece thickness 3 - 80 mm Feed speed: 4 - 20 m/min Roller coater to apply either sealers or top coats Self-balancing floating head with automatic adjustment along and accross Independant adjustable speeds by means of inverters for conveying, application and doctor roller with digital display

incl. ribbon

You are responsible for dismantling and transporting this lot. There are no tools available.

Screw Capper 3 head 28 MCA More then 300 machines new and second hand on our seema .de