universal machine milling used for sale

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

Lid milling machine FP4MA-2204 Year of construction: 1987 Serial no.: 20965 Controls: Contour 2 Condition: fully functional

Auction-ID: A1-50750-12

x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 215 mm spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 1,8 kW weight of the machine ca.: 860 kg dimensions of machine L x W x H: 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:

Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

Ref. -No.: 10373 Manufacturer: SORALUCE Year of construction: 2017 Type of control: CNC Control: Heidenhain 530i Storage location: Halberstadt Country of origin: Spanien X-Travel: 6500 mm Y-Travel: 1600 mm Z-Travel: 900 mm Table-Size (Lxw): 8000 x 900 mm Drive power spindle: 28 kW Swivel range milling head: 2,5 ° Tool Taper: SK 50 Feed rate: 15000 mm / min Further information: - Number of axes = 3 + 2 - incl. Swivel head

Ref. -No.: 10164 Manufacturer: DECKEL MAHO Year of construction: 1986 Type of control: CNC Control: CNC 432 Storage location: Halberstadt Country of origin: Deutschland Total connected load: 40 kVA X-Travel: 800 mm Y-Travel: 450 mm Z-Travel: 500 mm Feed force (X, Y, Z): X 800, Y 24000, Z 8000 N Quill Stroke: 100 mm Speed work spindle: 20-4000 RPM Feeds X/Y/Z: 1-3000 m / min Rapid Traverse X/Y/Z: 8 m / min Tool Taper: ISO 40 Space requirements: 3680 x 3780 x 2720 LxWxH (mm) Further information: Additional information: - with controlled rotary table Ø800 (B axis) - simultaneously controlled axes: 3 - axes controlled one after the other: 4

S. No.: 238828

Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.

WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS

Mill Plus Control Built in 1998 24-fold tool changer Working area 500 x 380 x 380 mm Rapid traverses 10000 m/min Rapid traverse 30 m Direct displacement measuring system Tool holder SK40, ISO DIN 69871 max. spindle speed max. 15000 rpm (Kessler) Angle table 800 x 480 mm, load 500 kg Spindle concentricity 300/0.01 mm Weight 3500 kg Machine dimensions: 2.45 x 1.76 x 2.38 m Coolant Injection El. Handwheel The machine is in very good technical condition. Runs quietly and precisely.

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 220 mm : 425 mm table surface area: 700 x 210 mm connected load frequency: V max. distance between table and spindle-nose: 470 mm total power requirement: 1,5 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,2 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan

WE OFFER AN NICE CONDITION DMU 70 EVO MACHINE IS ON POWER WORKING DAILY ORDERS IN SHORT WE PROVIDE VIDEO OF WORKING

Sell a milling machine with some accessories. The milling machine works. Suitable for smaller metal construction companies.

CINCINNATI ARROW 2 1000 CNC WITH LOW HOURS WE OFFER AN NICE CONDITION VERTICAL MACHINING CENTRE YEAR 2003 WITH EQUIPMENT CONTROLS: GE-FANUC SERIES 18I-M CONTROL Table: 1,120 x 610mm TRAVELS: X : 1,020mm, Y : 510mm, Z: 560mm. Rapid Traverse : XYZ=24m/min. Maximum Cutting Feed : 15m/min. Maximum Spindle Speed: 8,000rpm. Spindle Taper BT40. 20 Position ATC. MACHINE WILL BE AWAILIBLE FROM BEGINING FEBRUARY 2024

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Control: manual 3-axis Manual Read-Out Max.travel range: X 600 mm Y 400 mm Z 400 mm Clamping table: 400 x 600 mm Spindle speed ? 63 - 3150 rpm Taper ? SK 40 Made in Czech Republic

Control: iTNC 530 Max.travel range: X 500 mm Y 450 mm Z 400 mm A +5 / - 110? - manual C nx 360? - manual Spindle speed ? 10000 rpm Taper ? SK 40 Tool changer ? 16 positon measuring probe for parts set up 3 axis + 2 axis (dividing head) Tool pr

Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea

Control: Mill plus Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Four Pallets Coolant tank:2500l machine has spindle cool

Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine

Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha

Control: iTNC 530 Max.travel range: X 850 mm Y 700 mm Z 500 mm A +/- 115? C nx 360? Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 38+44 positon Coolant tank: 900l machine has spindle cooling, Erowa clamping system is available, measu

Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table

I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.

WE OFFER AN BRAND NEW MACHINE, MACHINE WAS NEWR USED FOR WORK ATTACHED PHOTOS MACHINE IS AWAILIBLE IMEDIATELY

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Inv. Num. : 7252 Type: SMX Producer: REXIM Created: 2018 Parameters: Work table length: 1350 mm Work table width: 355 mm Maximum table load (uniform): 600 kg Maximum distance between the spindle and the table: 520 mm

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

X axis travel 5000mm Y axis travel 2500mm Z axis travel 1500mm C axis automatic head cnc rotary table CNC Heidenhain 530 machine in excellent conditions.

Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995